10 Best Intercambiador De Calor In The Us - Black Friday 2024
Best Choice1
1HVACReznor Model UDX-250 Unit Heater | Liquid Propane 250,000 BTU | Heat Exchanger, Forced Air/Fan, Direct Spark Ignition, Low Noise | for Residential Garages, Workshops, and Warehouses
Main highlights- Warranty: A 9 Year Heat Exchanger, Burner, and Flue Collection Box Assembly; 4 Year All Electrical and Mechanical Components. For warranty validity, ensure installation compliance with local and state codes.
- User-Friendly Operation: The unit features user-friendly elements such as a status-indicating LED light and 7-segment display board for troubleshooting needs, providing a seamless experience for users.
- More Information: Feel free to check out the Fourth Photo or the Product Description section for valuable details on this unit's specifications and features.
- Fast Heating: Its single-burner combustion system and TCORE2 titanium-stabilized aluminized steel heat exchanger work seamlessly together to deliver optimal results.
- Efficient Performance: Experience ultimate power of UDX-250. With a powerful 250,000 BTU capacity and exceptional 83% AFUE rating, this unit maximizes Annual Fuel Utilization Efficiency.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
HayWHNKNHayWHNKN 35CFM Refrigerated Air Dryer Compressed Air Dryer Refrigerated Type 220V 600W Inlet and Outlet Ports Size 1" G for 7.5HP Air Compressor
Main highlights- 【Working principle】The humid and high temperature compressed air flows into the front cooler after the heat exchange into the heat exchanger and the cold air discharged from the evaporator, so that the temperature of the compressed air into the evaporator is reduced.
- 【Parameter】Flow capacity：70 cfm;Refrigerant Type：R134A;Voltage：220V;Power：800W;Interface pipe diameter: ZG1.0;Air capacity: 2.5m³/min;Work pressure: ≤1.0Mpa;Inlet temperature: ≤80℃;Dew point temperature: 2-10℃
- 【Note】Precision machine, as far as possible installed indoors, if outdoors, need to do rain, high temperature and other special protection. No rain, no corrosive gas; Low dust and relative
- 【Good Effect】Large volume evaporator, large evaporation area, good effect.High pressure and high temperature resistant refrigeration compressor with long service life.
- 【Electronic Drain Valve 】The drain time can be adjusted. If it needs to be adjusted longer, the SEC key on the left can be adjusted to 2 seconds, and the MIN key on the right can be adjusted to 5 minutes (0-10 middle).
9.6Exceptional
View offer on:
Show more
3
BestEquip20% OffBestEquip Heat Exchanger 3"x7.5" 30 Plates Brazed Plate Heat Exchanger 316L 3/4" MPT Heat Exchanger B12-30 Beer Wort Chiller for Hydronic Heating
Main highlights- 【ROBUST CONSTRUCTION】- This 30 plate heat exchanger features 316L stainless steel sheets, which are brazed together at the edges and the matrix of contact points for a reliable and rugged part to form a durable, integral piece that can withstand high pressure and temperature. Four thickened MNPT ports for your easier installation.
- 【HIGHLY VERSATILE】-This heat exchanger beer offers the highest level of thermal efficiency and durability in a compact & lightweight unit, ideal for industrial oil cooling, refrigerant evaporators, and condensers, residential and light commercial HVAC hydronic systems.
- 【HIGH THERMAL EFFICIENCY】- Turbulent-flow design moves the two media in opposite directions and creates strong turbulences for superior heat transfer rates and efficiency. Our heat exchanger series have been certificated by CE. Dimension: 7.8" x 3" x 3.7" / 20 cm x 7.8 cm x 9.5 cm.
- 【ENERGY OPTIMIZED】 - This heat exchanger stainless can heat water to the preset temperature, which is super energy-saving with no electricity consumption and no oxygen consumption.
- 【COMPACT DESIGN】- Corrugated plate design of this plate chiller wort allows for substantially smaller build and footprint at an equivalent or better performance compared to other heat transfer devices – resulting in significant space savings.
9.4Excellent
View offer on:
Show more
4
GPOASGPOAS 22x24 Heat Exchanger Water To Air, Forced Air Heating with 1 Copper Ports Hot Water Coil for Outdoor Wood Furnaces, Residential Heating
Main highlights- 【Wide Application】-- This heat exchanger provides a high level of thermal efficiency and durability in a compact and lightweight construction. Ideal for outdoor wood stoves, residential and commercial heating and cooling, forced air heating, hybrid systems, air conditioning, dehumidification and more
- 【Warmly Notice】-- Copper pipes need to be forged at a high temperature and then cooled with water during the production process. Some water stains will inevitably occur during this process, but it will not affect the normal use of the heat exchanger. If you mind this, please consider carefully before buying
- 【Superior Quality】-- Our water-to-air heat exchangers adopt 22x24 robust 306 steel made case to provide support around the body of the heat exchanger. 12 aluminum fins per inch and 3 rows of 3/8 seamless copper tubes maximize heating or cooling efficiency. Edges and contact points are base brazed so this heat exchanger can withstand high pressures and temperatures, it is sturdy and durable
- 【Highly Energy-saving】-- To heat water to a preset temperature, this heat exchanger can directly convert thermal energy. The highly conductive material has good heat transfer and refrigeration performance and economy without consuming electricity and oxygen
- 【Easy to Install Practical Design】-- Installation of the heat exchanger is simplified with four thickened MNPT ports by simply sliding it into the plenum. You dont need any extral tools to install, the design of this structure makes the floor space smaller, thus saving space, and will not affect the working performance of this product
9.3Excellent
View offer on:
Show more
5
GCCSJ22x24 Heat Exchanger Water To Air With Copper Ports High Heat Energy for Hot Air Wood Furnace Plenum And Hydronic Heating (22“X24")
Main highlights- 【Superior Quality】-- Our water-to-air heat exchangers adopt 22x24 robust 306 steel made case to provide support around the body of the heat exchanger. 12 aluminum fins per inch and 3 rows of 3/8 seamless copper tubes maximize heating or cooling efficiency. Edges and contact points are base brazed so this heat exchanger can withstand high pressures and temperatures, it is sturdy and durable.
- 【Highly Energy-saving】-- To heat water to a preset temperature, this heat exchanger can directly convert thermal energy. The highly conductive material has good heat transfer and refrigeration performance and economy without consuming electricity and oxygen.
- 【Exceptional Process】--The fins are made of epoxy resin coated aluminum fins. It reduces the possibility of multiple corrosion reactions, provides long-term corrosion protection to extend the life of the equipment, and improves performance and reliability.
- 【Easy to Install&Practical Design】-- Installation of the heat exchanger is simplified with four thickened MNPT ports by simply sliding it into the plenum. You don't need any extral tools to install, the design of this structure makes the floor space smaller, thus saving space, and will not affect the working performance of this product.
- 【100% Satisfaction Service】-- Please feel free to buy our products, if you encounter any problems in the process of use, please feel free to reach out to us, we will definitely give you a satisfactory answer.
9.2Excellent
View offer on:
Show more
6
BrazetekBrazed Plate Heat Exchanger Stainless Steel SS316L 4"x12" 20 Plates 1" MPT 250,000 BTU/hr Hydronic Heating
Main highlights- Water-to-Water heating and cooling applications
- Outdoor wood furnace and wood boiler heating
- Domestic hot water heating applications
- 4-1/4" x 12" - 20-plates, 1" mnpt ports. BTU rating: up to 250,000 BTU/hr
- 316L Stainless Steel Brazed Plate Heat Exchanger - Copper Brazed - Flow rate: up to 40 gpm
9.1Excellent
View offer on:
Show more
7
AlecoilALECOIL 5"x12"-100 Plates Heat Exchanger with 1-1/4" MPT Port Water to Water 316L Stainless Steel Brazed Plate Heat Exchanger for Water Heating, Floor Heating, Industrial and Commercial Refrigeration
Main highlights- 【TRUSTED QUALITY】Our brazed plate heat exchanger series have been certificated by UL. ALECOIL also offer a 1-year warranty to cover manufacturing defects.
- 【SPECIAL PROCESS】Uses an asymmetric fish bone plate design that creates strong turbulences and moves the two media in opposite directions for superior heat transfer rates and efficiency. Fish bone plate design also reduces the pressure drop on the secondary side, making it possible to use a smaller pump and less electricity, lowering the overall cost of applications.
- 【PARAMETER】Model: FHC030B-100-4.5, 1,452,000 btu/h capacity, 31.68 sq.ft heat transfer area, 5"x12"-100 plates with 1-1/4" port.
- 【EXCEPTIONAL PERFORMANCE】ALECOIL brazed plate heat exchanger is made of high quality 316L stainless steel and have been brazed together with copper in an oxygen-free furnace. This provides unparalleled strength to support the widest range of high-temperature and high-pressure applications.
- 【APPLICATION】Provides the highest level of thermal efficiency and durability in a compact lightweight unit, this water heat exchanger is ideal for domestic water heating, floor heating, snow melting, wort chiller, outdoor wood furnaces, solar heating, zone heating systems, industrial oil cooling, residential and light commercial HVAC hydronic systems.
9.0Excellent
View offer on:
Show more
8
BewinnerSwimming Pool Heat Exchanger - 60KW Stainless Steel SPA Constant Temperature Heater, Swimming Pool Circulation Heating Equipment
Main highlights- 【Purpose】: The thermostat heating equipment is designed to minimize the pressure loss in the heating system and save energy.
- 【Cyclic Heating】: It is heated by water and conducted by hot water, it turns cold water into hot water by heat energy and heats cold water, suitable for the simultaneous use of solar panels (shipped without solar panels).
- 【Compact】: The thermostat heating equipment is small and compact, requires minimum installation space, light in weight, and equipped with a fixed bracket, which is convenient for installation and use.
- 【Built in Limiter】: This swimming pool heat exchanger has a specially designed built in limiter to ensure maximum heat exchange.
- 【Anti corrosive】: This heat exchanger is made of premium corrosive resistant stainless steel, which is sturdy and has a long service life.
8.8Very Good
View offer on:
Show more
9
ABAB Plate Heat Exchanger, 4"x 12" 80 Plates Water To Water Heat Exchanger, Copper/SS316L Stainless Steel Brazed Plate Heat Exchanger For Floor Heating, Water Heating, Snow Melting
Main highlights- 【Product Parameter】600,000 - 630,000 BTU CAPACITY: Depending on the application, this product can produce 600kBtu to 630kBtu per hour. 80 PLATES; 4"x 12", 1" MPT: 80 brazed plates work to efficiently heat water for your application.
- 【Premium Quality】Our plate heat exchanger is made of high quality 316L stainless steel which are brazed together by 99.9% copper at the edges for a reliable and rugged part to form a durable, integral piece that can resist leakage and withstand high pressure and temperature.
- 【Multiple Applications】AB water heat exchanger offers the highest level of thermal efficiency and durability in a compact & lightweight unit, perfect for domestic water heating, Floor Heating, Snow Melting, District or Zone Heating Systems, Outdoor Wood Furnaces, Hydraulic and Lube Oil Coolers, Radiator Heating, Hydronic Heating, Solar Heating, Wood Boiler.
- 【Convenient For Use And Energy Saving】Smooth Thread makes a easy, quick, flexible hookup. Highly conductive and super-thin stainless steel plates make good performance and economy for heating transfer and cooling without electricity consumption and oxygen consumption.
- 【100% Satisfaction Service】 Our heat exchanger comes with a 1-year warranty to cover manufacturer defects. And we provide 100% satisfaction service as well as best premium quality product, if you have any problem about the product, please contact us freely.
8.6Very Good
View offer on:
Show more
10
RVPart ProRVPart Pro RV Tankless Water Heater Propane with 15"x15" Black Door and Remote Controller, Endless Hot Water, DC 12V, 7×24 Technical Support,High Altitude, Easy Installation, Compatible with All RVs
Main highlights- User-Friendly Operation — The built-in microcomputer control panel makes temperature adjustment convenient, allowing you to set the temperature anywhere between 95 and 123 degrees Fahrenheit. The RVPart Pro camper hot water heater also offers error codes for easy troubleshooting.
- Safety and Reliability — Certified by CSA and having 24 months of service, RVPart Pro RV instant hot water heater offers peace of mind with its top-notch safety features, including a built-in forced exhaust fan, stable combustion, freeze protection and automatic gas shut-off in case of accidental extinguishing.
- Instant Hot Water Supply—RV tankless water heaters are better than traditional tank water heaters by delivering a constant,uninterrupted stream of hot water for multiple showers without preheating.RV tankless water heaters eliminate the frustrating 20 to 30 mins waiting time for hot water during your shower,ensuring you can enjoy hot water whenever needed.Moreover,the RVPart Pro tankless RV water heater uses propane for heating,so you won't be worried about running out of electricity in your RV.
- High-Performance Technology — With a 60,000 BTU output power, an oxygen-free copper heat exchanger, and a brushless DC fan, this RVPart Pro tankless water heater for RV is engineered for high-altitude use (Canada > 4500 feet, USA > 5000 feet) and employs segmented combustion to prevent overheating during the summer months, ensuring high energy efficiency and maximum comfort.
- Compact and Lightweight Design — The RVPart Pro RV on-demand water heater is compact and lightweight, with a 15" x 15" door size and 13" x 13" opening size, making installation a breeze even in tight spaces.
8.5Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for intercambiador de calor
