10 Best Intake Supercharger Turbo In The Us - Black Friday 2024
YL New Universal 12V Electric Turbo SuperCharger Kit Thrust Electric TurboCharger Air Filter Intake for car improve speed
Main highlights- Performance Operating voltage: 12V-16V test value Drive current: 26A measured value Shutdown voltage: 0.8V throttle practical value Full-speed voltage: 0.9V-2.2V use value Linear drive: 0.9V-2.5V measured value Speed range: 6800RPM-32000RPM Wind speed range: 5m / s-86m / s measured value Wind pressure range: 0.05kg / cm-0.2kg / cm with turbine test value Adjustment mode: Throttle voltage signal is activated Fan power: up to 240 watts
- Features Lifting power - 10-30% increase in engine power Economical fuel - fuel consumption reduced 3-10% Environmental quality - LCD, HC, NOXJ reduced by 30% or less Protects the engine - Reduces engine wear due to deposits Small size - can be easily installed in various models Fast installation - 60-120 minutes installation is complete
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
POSENGPOSENG LS Intake Manifold with 102mm Throttle Body Fuel Rails Kit Replacement for Chevy 4.8 5.3 6.0 6.2 LS LS1 LS2 LS6 Sheet Metal Al Fabricated Black
Main highlights- Well-made: The Intake Manifold is constructed of 3 mm T-6061 aluminum, which means it can easily handle up to 30 lbs of boost.
- Performance: Our intake manifold with Throttle Body and Fuel Rails, the intake manifold features a 102mm throttle body, which can greatly improve the LS engine's performance.
- Note: The intake manifold needs to be matched with Supercharger Adapters Rectangle, Please add an adapter to your cart together with the intake manifold, then you will get a cooler car
- Compatible with: Chevrolet Corvette 1997-2004; Pontiac trans-AM 1998-2002; Chevrolet Z06 2001-2004; Cadillac CTS V series; Chevrolet Corvette; Chevrolet SSR; Chevrolet Trail Blazers SS; Cadillac mid-size car series; Pontiac GTO; Saab 9-7X Aero
- Application: The Intake Manifold Replacement for Chevrolet Small Block V8 GEN. III/IV (LS-BASED). 4.8 L / 293 in3 (L20, LY2). 5.3 L / 325 in3 (LC9, LH6, LH8, LMG, LY5). 6.0 L / 364 in3 (L76, L96, LFA, LY6). 6.2 L / 376 in3 (L92, L99, LS3, LSA).
9.8Exceptional
View offer on:
Show more
3
Gsze2.5" F1-Z Car Air Intake Turbonator , Dual Fan Turbine Super Gas Fuel Saver Turbo (Black)
Main highlights- WORKING PRINCIPLE: ABS new material fan blade draws air into the combustion chamber at a higher rate, Improve the atomization degree of the combustion chamber, increased horsepower and gasoline savings.
- PACKAGE and SIZE : 1 x Intake Fan,3 x Rubber Loop,Intake turbine size: 7.5cm x 6.5cm/ 2.9inch x 2.5inch.
- MATERIAL: ABS new material fan blade+Aluminum alloy pipe. ABS material is corrosion resistant, heat resistant, high hardness and does not produce metal debris entering the combustion chamber. Aluminum alloy pipes are corrosion resistant, durable and lighter in weight.
- INSTALLATION POSITION：The turbine is installed in the intake hose of the engine, and the best position is 10cm-30cm / 3.94 "- 11.8" before the throttle valve. Note: suitable for car models with inlet pipe diameter greater than 2.5 inches.
- Hose Clamp: 2pcs 3 inch (59mm-82mm) hose clamps
- FEATURES: Increase the intake air volume of the combustion chamber by the turbofan, improve the combustion efficiency of the combustion chamber gas and thus enhance the horsepower.
9.7Exceptional
View offer on:
Show more
4
HOKZYHOUSEElectric Supercharger Turbo, Electric Turbo Universal 3in Electric Turbocharger Air Intake Generator Turbo Parts Car Modification Accessory
Main highlights- Universal Compatibility: This versatile design is compatible with all car and truck models, providing a convenient solution for a wide range of vehicles.
- Multi-purpose Application: Ideal for 3in cold air intake, short air intake, and turbocharging applications, making it a versatile and practical choice for various vehicle modifications.
- High-Quality Construction: Built to meet standard specifications, this product undergoes rigorous factory quality control measures to ensure durability and reliability.
- Easy Replacement: Effortlessly replace old or damaged parts with this direct-fit replacement, ensuring seamless installation and optimal performance.
- Cutting-Edge Technology: Crafted using advanced manufacturing techniques, this component offers high performance and reliability, making it a dependable choice for automotive enthusiasts.
9.6Exceptional
View offer on:
Show more
5
RICKYZHUNew Double Supercharger Turbine Turbo charger Air Intake Fuel Saver Fan
Main highlights- Universal fit for air intake hose with diameter between 65mm and 74mm (2.5 - 2.9 inch) . Come with 3pcs rubber holders.
- Turbo fuel saver fan with single propeller.
- Provides a more dynamic control over the intake system by forcing powerful airflow into the combustion chamber at a high speed.
- Horsepower enhancement and fuel saving capability.
- Brand new and high quality.
9.5Excellent
View offer on:
Show more
6
Htostar RacingHtostar Racing For LS Intake Manifold Compatible with LS1 LS2 LS6 of cathedral port heads with Drive by Cable Throttle Body Compatible with Chevy Cadillac Pontiac Aluminum (102mm)
Main highlights- [Throttle Body] Drive by cable, Idle air control (IAC) and throttle position sensor (TPS) installed. Flow Rate: 1218 CFM, Working pressure: 85 PSI, Burst pressure: 245 PSI.
- [Some Models] Compatible with Chevy Corvette 97-07 | Corvette Z06 01-04 | SSR 05-06 | TrailBlazer SS 06-09 | Cadillac CTS V-series 04-07 | Pontiac Firebird Formula Trans AM 98-02 | Pontiac GTO 05-06 | Saab 9-7X Aero 08-09.
- [Size] 102mm/4.02" inlet with 210mm height (taller); 1/8" thick T6061 aluminum; vacuum ports (1/4NPT & 1/8NPT) with plug; rear M12 x 1.25 MAP port for 10 MAP.
- [Note] Fits original factory fuel injectors for LS1 and LS6, but different spacers may be required for LS2.
- [Applicable Engine] Compatible with LS based engines with cathedral port heads shape; Compatible with 4.8L 5.3L LS1 LS2 LS6 original engine. For LS 4 bolt intake with cable drive only, not for drive by wire.
9.3Excellent
View offer on:
Show more
7
RICKYZHUBlack New Double Supercharger Turbine Turbo charger Air Intake Fuel Saver Fan
Main highlights- Universal fit for air intake hose with diameter between 65mm and 74mm (2.5 - 2.9 inch) . Come with 3pcs rubber holders.
- Turbo fuel saver fan with single propeller.
- Provides a more dynamic control over the intake system by forcing powerful airflow into the combustion chamber at a high speed.
- Horsepower enhancement and fuel saving capability.
- Brand new and high quality.
9.1Excellent
View offer on:
Show more
8
TouSuaRSiGeneral Supercharger Kit Blower Booster, Car SUV Steel Aluminum Turbocharger Kit Compressor Blower Turbocharger Turbo Kit Remanufacturing Kit Compatible with 2.0-3.5L
Main highlights- - The supercharger is retreaded, not new, the manufacturer does not retail, only supply to car manufacturer,so no new ones on the market. It has worked no more than 10,000 km, almost new. the manufacturer does not retail,only supply to car manufacturer,so no new ones on the market.
- - The size of the turbocharger is approximately: 43*34*32cm/16.93*13.39*12.60in; it is small in size and can be easily installed in various models. Displacement: 2.0-3.5L
- - Note that the supercharger is a v pulley (VPK) . Before installation, the gear oil must be filled with about 150ml, and the oil type is 75w-90, GL-5.
- - It is suitable for car engine modification. If there is enough modification space, it can be installed on any engine with displacement below 3.5L. Improve engine efficiency and reduce engine wear caused by deposits.
- - Direction of rotation as you want, but the air intake and outlet will swap. The supercharger can be mounted on any engine if there is enough space.
9.0Excellent
View offer on:
Show more
9
SallurmoseGeneral Supercharger, Car SUV Aluminum Cherokee Roots Supercharger Compressor Blower Turbocharger Turbo Remanufacturing Kit Compatible with 2.0-3.5L
Main highlights- ❏The supercharger is refurbished, not new, and the manufacturer does not retail it, but only supplies it to the car manufacturer, so there is no new one on the market. It has worked no more than 10,000 kilometers and is almost new. Manufacturers do not retail, only supply to car manufacturers, so there is no new on the market.
- ❏The size of the turbocharger is approximately: 43X31X37cm; it is small in size and can be easily installed in various models.
- ❏The direction of rotation is free, but the air inlet and outlet will be interchanged. If there is enough space, the supercharger can be installed on any engine.
- ❏Suitable for car engine modification. If there is enough space for modification, it can be installed on any engine with a displacement below 3.5L. Improve engine efficiency and reduce engine wear caused by deposits.
- ❏Note that the supercharger is a v pulley (VPK).Before installation, the gear oil must be filled with about 150ml, and the oil type is 75w-90, GL-5.
8.9Very Good
View offer on:
Show more
10
RPMRPM Can-Am Turbo X3 Billet Intake Plenum Clamps/Reinforcements
Main highlights- Surface Finish: Black
- Manufacturer Part Number: X3-Plenum-Clamps
- Country/Region Of Manufacture: United States
- Brand: Compatible with RPM SxS
8.8Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for intake supercharger turbo
