10 Best Hotend 1mm In The Us - Black Friday 2024
Best Choice1
Micro-SwissMicroswiss FlowTech Hotend Upgrade for Creality K1 / K1 Max / K1C - Leakproof Nozzle - Cold Nozzle Change - High Flow - All Metal Design - Made in USA
Main highlights- Leak-Proof Nozzle: Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.
- High-Flow Characteristics: Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.
- Drop-in upgrade: FlowTech hotend is designed to be an easy drop-in upgrade for each 3D printer model. This updated edition is designed for Creality K1 / K1 Max and K1C . Stock z-height, build volume and firmware remains unchanged.
- Cold Nozzle Change: Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.
- All-Metal Design: Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged.
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
3DTOOLS3DTOOLS Bambu LAB Hardened Steel Hotend Kits Set with Fan for P1,P1P,P1S 3D Printer (0.4MM)
Main highlights- 3DTOOLS Original Bambu LAB Hardened Steel Hotend Kit P1,X1 - X1 Series and P1 Series
9.7Exceptional
View offer on:
Show more
3
XIFOWE20% OffXIFOWE Hotend X1/X1C Assembly with Standby Nozzles Compatible with Bambu Lab X1, X1-C X1 Carbon 3D Printers, 5 PCS Hardened Steel Nozzles (0.2, 0.4, 0.6, 0.8,1.0mm) with DIY Tools and A Parts Box...
Main highlights- What you receive: 1pcs hot end hardened steel nozzle assembly kit with one nozzle for each of 0.2/0.4/0.6/0.8/1.0mm, a ten-grid parts box, and various tools. The picture content shows the shipped accessories
- Reminder: A 0.2mm nozzle is not suitable for printing materials such as carbon fiber with added large particle fillers, as it may increase the risk of clogging. Tightening the nozzle during heating can effectively prevent material leakage
- Pay special attention to: The connector on thermistor that was included in the package is wrong, the remaining inventory will be compensated by deducting of this expenses. You can replace it with the wire that with your original hot end. We will update the correct products in future shipments
- Material: Nozzles are made of hardened tool steel, It has excellent wear resistance, heat resistance. All metal smooth insulation, composed of bimetallic copper and titanium alloy insulation sections, provides better heat dissipation effect
- Installation details: Please heat the nozzle to 250℃ and tighten it to avoid leaking. And please heat up the hotend to 260℃ when changing the nozzle, silicone grease can be applied to the nozzle thread, it helps you to prevent it from leaking
- Convenient: Not only suitable for common 3D printer filaments, but also can print filaments of carbon fiber, fiberglass. The connection between the heating block and the radiator is upgraded to two titanium alloy screws for fixation, Solid and reliable
9.6Exceptional
View offer on:
Show more
4
HzdaDeveHzdaDeve 2 Pack A1 Mini/A1 Hotend Print Head Hot End Kit Extruder Upgrade High-Temperature 0.4MM Hardened Steel Nozzle Replacement with 4PCS Silicone Cover Sock for Bambu Lab 3D Printer Accessories
Main highlights- Simple Installation: Remove the old hot end and install the new hotend to start.
- Premium Nozzle Quality: hardened nozzles are made of high-quality stainless Steel. The nozzle is not easy to stick filament with high hardness, resistant to wear and tear.
- Package Included: 2 set hotend kit and extra 4pcs silicone sock.
- Notice: This hotend kit replacement is only compatible with A1 Mini and A1 3D printer.
- Filament material: The print head for A1 Mini works with 1.75 mm PLA/ABS/PETG/TPU/Wood filament.
9.5Excellent
View offer on:
Show more
5
Creality2024 Official Creality K1/K1 Max/K1C Hotend Upgrades Kit, K1 Series Ceramic Heating Block Kit, 3D Printers Hotend with Integrated Quick-Swap Nozzle, Supports 300°C High Temperature, 600mm/s High-Speed
Main highlights- Upgraded Durable Material&300°C High Temperature Resistance: Creality K1C hotend's throat is made of titanium alloy to minimize heat transfer, our Creality K1 Max nozzle is suitable for printing on a wide range of consumables such as PLA, ABS, PETG, TPU, PP, PC, PLA-CF, PA-CF, PET-CF, and so on. Creality K1 hotend fits for K1/K1 Max/K1C 3d printer, Creality K1C upgrades with integrated quick-swap nozzle has all metal hotend material and heat break for high temperature resistance. Notice: It is recommended that the Creality K1 extruder's printer case be opened during printing to enhance heat dissipation and reduce the risk of clogging
- Up to 600 mm/s High-speed Printing: Creality K1C hotend with a 30% increase in the entire hotmelt section, achieving a maximum flow rate of up to 32 mm³/s. Creality k1 parts allows for printing speeds up to 600 mm/s. K1 Max hotend's burr-free orifice is less likely to clog the material and provides stable printing
- Official Hotend Kit for K1 Series: 100% Creality Official upgrade ceramic heating block kit for K1/K1 Max/K1C 3D printers, our Creality K1 Max upgrades can be used for high speed printing. K1 Max hot end's nozzle clogging depends on the type of filament used and the ambient temperature at the time of printing. K1 series printers are enclosed and may suffer from poor heat dissipation resulting in filament clogging
- High Flow Rate: The Creality K1 hotend upgrades is equipped with a rugged and powerful 60W 360° encircling ceramic heating ring. Creality K1 hotend's 360° surrounding ceramic heater improves the heating efficiency and heats up to 200°C in less than 40 seconds
- Efficient Cooling Upgrade for Easy Printing: 3D printers' K1 Max hotend's heat dissipation part adopts split design to reduce heat transmission; the ceramic heating block's surface is nickel-plated to improve abrasion resistance and increase luster. Notice: Please ensure good adhesion on the first printing layer; if necessary, re-adjust the level and apply adhesive to improve adhesion. Nozzle clogging can occur with improper adhesion of the first layer, causing the nozzle to pick up loose print material and deposit it outside as it moves
9.4Excellent
View offer on:
Show more
6
HzdaDeve11% OffHzdaDeve Hotend for Lab X1C X1E Print Head 24V 48W Ceramic Heater Cartridge NTC 100K Thermistor Removable 0.4MM Hardened Steel Nozzle High Temperature Sensor Heating Tube Kit Wrench Replacement
Main highlights- Simple Installation: Remove the old hot end and install the new hotend to start.
- Package Included: 1 set hotend kit + extra 1 pack hardened nozzle (thermistor, ceramic heating rod, nozzle, silicone cover, heat sink are preinstalled)
- Notice: This hotend kit replacement is only compatible with X1C X1E 3D printer.
- High Speed: It's a special stainless steel design so the print head heats evenly. The interior of the nozzle is smooth without burry, which not only reduces air resistance and prevents the filament from jamming, but supports high-speed printing.
- Filament material: The print head for X1 series works with 1.75 mm PLA/ABS/PETG/TPU/Wood filament.
9.1Excellent
View offer on:
Show more
7
LANKEGULANKEGU Upgrade Hotend Kit for Bambu Lab A1/A1 Mini, Hot End Assembly 0.4/0.6/0.8mm Hardened Steel Nozzle & Silicone Sock for Bambu Lab 3D Printer Part
Main highlights- QUICK REPLACEMENT: The magnetic block on the hot end heating component can quickly and accurately fix the nozzle to the installation position, making disassembly and installation of the nozzle easy and convenient.
- NOTE: Before replacement, please ensure that the hot end has cooled down and avoid touching the heating block at the bottom of the hot end to prevent burns.
- MULTIPLE SIZE AVAILABLE: Come with 1PC 0.6mm and 1PC 0.8mm nozzle, different nozzle sizes, with different printing speeds, compared to 0.2mm nozzles, printing with 0.6mm and 0.8mm nozzles can achieve faster printing speed.
- COMPATIBLE: The hot-end kit is compatible with A1/A1 Mini 3D printers. Package Include: 1 X 0.4mm Hotend Kit, 1 X 0.6MM, 1X0.8mm (Hardened Nozzle), 1XSilicone Sock.
- 0.4MM NOZZLE HOTEND KIT: 0.4mm nozzle is the standard nozzle diameter for modern 3D printers, which effectively balances printing quality and printing speed.
8.8Very Good
View offer on:
Show more
8
CrealityCreality Official K1/K1 Max/K1C Upgrade Ceramic Heating Block Hotend Kit, Unicorn Quick Swap Nozzle Kit, High Temperature Resistant, All-Metal Integrated Design Kit for K1 Series 3D Printers
Main highlights- 【Upgraded Material】The heat break is made of titanium alloy, which reduces heat conduction The nozzle is composed of copper alloy and hardened steel, supporting the printing of various filaments such as PLA ABS PETG TPU PP PC PLA-CF PA-CF PET-CF.
- 【Uniform heating】Excellent heat distribution and thermal insulation properties ensure uniform heating of the printing surface,360° Surround Ceramic Heater improves heating efficiency, heating more evenly and transferring heat faster.
- 【Multi-model matching】Creality Upgraded All-in-One K1 Series Ceramic Heating Block Hotend Kit Compatible with Creality K1, K1 MAX, and K1C 3D high-speed printers, , of which K1, K1max can be upgraded to a one-piece quick-release nozzle after retrofitting.
- 【High flow rate】Enlarge the nozzle chamber, the maximum flow rate can reach 32mm³/s, and support 600mm/s high-speed printing,Burr-free orifice, not easy to clog the material, stable printing.
- 【All-metal integrated design 】The nozzle and heat breakadopts an all-metal integrated design, facilitating quick disassembly and convenient replacement.
8.7Very Good
View offer on:
Show more
9
CrealityCreality Official K1/K1 Max Ceramic Heating Block Kit, 60W Fast Heating Wear-Resistant Hotend Kit Supports 300°C High Temperature and 600mm/s High-Speed Printing
Main highlights- 【Professional Support】: To ensure your pleasant shopping experience, Creality has a professional customer service team to solve your problems; If you have any problems, please do not hesitate to contact us; We will provide friendly and fast customer service to solve your problem within 24 hours
- 【Processing Upgrade for Better Printing】: The K1 hotend kit is made of copper alloy and hardened steel; The heat break is made of titanium alloy and copper, with an extremely thin wall thickness and excellent heat insulation performance; Nozzle inner wall roughness≤Ra0.4, smoother feeding
- 【Original Quality】: 100% Creality Official K1 Max ceramic heating block kit; Designed specifically for 3D printers K1 and K1 Max, providing high-speed and high-quality printing for 3D printers
- 【High Speed, High Flow】: Thanks to the hot melt section length being enlarged, and increased by 30% (length is up to 28.5mm), the K1 Max hotend supports 600mm/s high-speed and 32mm³/s high flow printing; Further more, 360° surround ceramic heater improves heating efficiency, more uniform heating; It can be heated to 200℃ in 40 seconds
- 【All-metal Design】: The K1 Max heating block kit is all metal design, more powerful overall performance and more resistant to high temperature; Support 300℃ high temperature printing, compatible with more filaments such as PLA, ABS, PETG, TPU, PA, PC, PLA-CF, PA-CF, PET-CF, etc
8.4Good
View offer on:
Show more
10
CHINDRAG2PCS A1 Mini Hotend Kit, 3D Printer Assembled Print Head Extruder Hot End Kit Replacement Heating Block with 0.2mm and 0.4mm Hardened Steel Nozzle and Silicone Cover for Bambu Lab A1 / A1 Mini
Main highlights- Premium Material: 3D Printer parts Hot End print head kit supports all kinds of filament materials, such as 1.75mm ABS, TPU, Wood, PLA, PETG.
- Package Included: 1PCS 0.2mm Hotend Kit, 1PCS 0.4mm Hotend Kit and 2PCS Silicone Covers.
- High Speed Printing: The Extruder Hotend kit is designed as special shape. Printing head heats evenly and feeding is smooth. The interior of the nozzle is smooth without burr, which can reduce air resistance and avoid the filament jamming.
- Easy to Install: The hotend replacement adopts magnetic suction installation, which can fix the nozzle to the installation position quickly and accurately. It is very simple and convenient to remove and install the hotend. Heat sink, heat break, heating block and hardened steel nozzle are pre-installed, so you just need to remove the old hotend kit and install the new head extruder replacement kit.
- Compatible Model: This assembled extrusion head kit is suitable for Bambu Lab A1 / A1 Mini high speed 3D printers.
8.3Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for hotend 1mm
