10 Best Hot Parts Bed In The Us - Black Friday 2024
Best Choice1
BIGTREETECHBIGTREETECH Flexible Steel Platform New Upgrade Zone-Heating Hot Bed with PEI Surface and Magnetic Bottom Sheet Adhesive 235×235mm for Ender 3, Ender3 Pro/V2, Ender3 S1/3 S1 Pro/Ender5 Pro 3D Printer
Main highlights- When using the hot bed, the printer needs at least 24V&300W power supply of the whole machine, which can perfectly replace and support all printers with a printing area of 235mmX235mm and a leveling hole of 170mmX170mm
- Warm reminder: the positive and negative poles cannot be connected reversely. Reverse connection will cause the power indicator to be off, but the function is normal. If you have any questions when using, you can write us at any time, and we will solve the problem for you
- The printing size of the hot bed is 235mmX235mm; The fixed leveling hole position is 170mmX170mm; The partition area is 125mmX125mm
- The hot bed is designed with 24V voltage, with maximum power of 240W and minimum power of 100W (zoning function)
- Compatibility: Compatible with Ender-3/Ender3 Pro/Ender-3 V2/Ender-3 S1/3 S1 Pro/Ender3 V2 Neo/Ender3 Neo, BIQU B1, BIQU Hurakan, Neptune-3 Pro, Kobra, SUNLU-T3/Two-Tree BLU-3, Longer-LK4 Pro, etc 3D Printer
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
MEIBAOGEMEIBAOGE 24V 200W Silicone Heater Mat Pad for 3D Printer Heated Bed Heating High Heating Pad Tool Parts Hot Bed
Main highlights- ✮Wonderful heater pad for your 3D printer.
- ✮The can dry burn about 180 degrees.
- ✮Specifications
240V
Power: 200W
Temperature: Below 200℃
Silicone
Size: approx.235x235mm/9.25x9.25in
Color: Orange, As pictures shown
Quantity: 1 Set - ✮Durable silicone rubber construction, extremely even distribution of heat, and resistance.
- ✮Continuous working temperature should be lower than 200 degrees.
Versatile and may be used in many other applications.
9.6Exceptional
View offer on:
Show more
3
FYSETCFYSETC 3D Printer Parts Heat Bed Mosfet Hot Bed Power Expansion Board High Current Load Module MOS Tube for 3D Printer Accessories-Pack of 1
Main highlights- This module under normal cooling, measured I (Max) = 30A can Stable long-term work during use, so we suggest the current should not exceed 30A. Only DC power supply is available, if Connecting to AC requires an SSR.
- Package includes: 1PC RED Mosfet, the red LED light to indicate use looks great inside its case.
- Has a large footprint: Extra large heat sink, more stable; the maximum current can be up to 30A or more, can use digital signal of 5-24v to control. Work well on wanhao i3 aka monoprice control box/ i3 mega/ Tronxy X5SA. The SIG terminal recommend to contact 5V signinal
- Good mosfet for your 3D printer hotbed: control hot bed, print head heating, compact appearance, compact design, more powerful heat dissipation, to solve the problem of excessive heat bed power, current load problem. It works well on wanhao i3/ i3 mega(a bit tough but fine）/ Tronx-X5SA etc.
- Connect the control signal of Ramps1.4 or MKS Mosfet to bed, can use hot bed output signal of Ramp1.4 and MKS series to control;
9.5Excellent
View offer on:
Show more
4
ComgrowCreality 4X Metal Leveling Nuts, 4X Springs, Capricorn Tube for 1.75mm Filament Kit 3D Printer Hot Bed Staying Level Upgraded Accessories for Ender 3 V2/Ender 3/Ender 3 Neo/Ender 3 V2 Neo/Ender 5 Plus
Main highlights- 4*Upgraded Aluminum Hand Twist Level Nut. These red aluminum nuts are upgraded replacement 3d printer parts for Ender 3/Ender 3 Pro/Ender 3 V2,Ender 3 Neo/Ender 3 V2 Neo/Ender 3 Max Neo/ Ender 5 Plus/ Ender 5 Pro, CR-10 Smart, CR 10 V3, CR-10 Mini
- 4* M4X35 screws for hot bed. NOTE: the length of screws is 35mm, if your printer hot bed screws are 40mm, please adjust the hot bed lower and leveling again to print.
- 4* Ender 3 V2 Springs Upgrade: Those ender 3 pro springs are around 25mm long, which are longer than the original ender 3, ender 3 pro and ender 3 v2 springs. You need to use a tool to cut it to be shorter or adjust the hot bed to be higher to fit the springs on creality ender 3, creality ender 3 pro, creality ender 3 v2.
- 1*1 Meter Original Capricorn Bowden tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- 1* Bowden tube cutter.
9.4Excellent
View offer on:
Show more
5
RICHOOSEOfficial Ender 3 V2 Heated Bed 3D Printer Replacement Hot Bed 220W 24V with Cable Compatible for Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Neo, Ender 3 V2 Neo...
Main highlights- What you get: 1X Official Creality Ender 3 V2 Heater Bed with Assembled Cable
- The Power of Creality Ender 3 Hot Bed is DC 24V 220W
- Official Creality Ender 3 V2 Heated bed with Aluminum Platform
- Frame of Ender 3 V2 Heat Platform Bed is 235X235X3mm
- Aluminum Ender 3 V2 Hot Bed with Cable Installed for Creality 3D Printer Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Neo, Ender 3 V2 Neo
9.2Excellent
View offer on:
Show more
6
LAYERNEER3D Printer Adhesive Glue Bed Weld Original, Strong Grip Reduces Warping for ABS, ASA, PLA, and PETG Filament on Compatible Build Plates, 118ml, 4 fl oz
Main highlights- THERMAL DYNAMIC COATING - Based on science, works like magic; Parts stick at hot and release when cooled; CHECK COMPATIBILITY IMAGE FOR YOUR SURFACE TYPE
- THE LAYERNEER DIFFERENCE: If for any reason you decide this adhesive isn't a fit for your application, we're here for you. We've helped hobbyist and professionals resolve complex adhesion and release issues with their setups
- NO-MESS APPLICATOR - Built in foam tip makes applying the coating to your build plate surface simple and it won't accidentally spill
- LOW ODOR & WATER SOLUBLE - No harsh smells; No headaches; Easy to touch up or remove with water
- LONG LASTING - Print several times on a single coating; recharge with a wet sponge to get more prints out of a single application; Cost pennies per print
8.9Very Good
View offer on:
Show more
7
TIOPYTIOPY 17 Pcs 3D Printer Hotbed Leveling Kit,4 pcs Blue Aluminum Hand Twist Leveling Nut,4 pcs Upgrade Springs, 4 pcs Screws,5 pcs Hot Bed Silicone Leveling Column Mounts for Ender 3/3 Pro
Main highlights- Stable support：The 3d printer spacer bed is made of soft rubber, the upgraded Level spring is useful for stronger elasticity, and the end surface is flat to ensure adjustable while providing stable support. This brings better printing results
- Packing list：4 Pcs aluminum bed leveling nuts , 4 x die spring (8x20 mm),4 x M4x 35 Hot Bed screws, 4 x heatbed silicone leveling column mounts(length 18 mm), 1 x Heatbed Silicone Leveling Column Mounts(length 16 mm)，1 x Storage box
- High quality material：Our leveling nut knob are made of high quality metal and done with surface oxidation treatment, aesthetically pleasing and more durable at the same time, it's compatible for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/ender 3 s1/ender 3 s1 pro, Ender 5/Ender 5 Plus/ Ender 5 Pro, CR-10/CR-10 V2/CR-10 V3/CR-10 Max/CR-10 Mini, CR-10S/CR-10S Pro/CR-10S Pro V2/CR-10 Plus,etc (Note: Doesn't fit for CR-10 S4 and CR-10 S5 )
- Easy leveling：The aluminum hand twist leveling nut with abrasive surface can provide better friction and more stability after leveling
- A variety of options：We provide a spring at the same time also provides a heatbed silicone leveling column, you can choose the appropriate adjustment mechanism according to the use of habits
8.7Very Good
View offer on:
Show more
8
HOT SHOTHot Shot Ready-to-Use Bed Bug Killer Spray, Kills Bed Bugs and Bed Bug Eggs, Kills Fleas and Dust Mites, 32 Ounce
9.7 Attachment9.5 Long life9.1 Simple to use8.6Very Good
View offer on:
Show more
9
FYSETCFYSETC Anycubi I3 Mega Aluminum Hot Bed Part - 220x220mm PEI Build Surface Support - 6061 Aluminum Hotbed Plate: Ultrabase Platform Glass Plate Replacement Upgrade Heated Bed Thickness 3mm with Screws
Main highlights- 5. Package Content: 1pc 220mm aluminum build plate with 4pcs screws for supporting 220x220 pei or textured build plate. If need the matched heater pad, please go to our shop.
- 4. High Quality: 6061 aluminum alloy, high strength and not easy to deform. Anti-corrosion. High surface flatness, ±0.15mm.
- 3. Well-made: The 3d printer aluminum bed plate has been tapped, drilled, drilled and tapped according to the official drawings, the stepped hole is positioned accurately, the thread is clear and non-slip, and the screw is flat and no protrusion after installation. Centerless grinding and drawing process. The brushed treatment can give the metal surface a non-mirror metallic luster, which has a very strong decorative effect like silk satin.
- 2. FDM 3D printer DIY part: Size: 220x220mm / 8.66x8.66inch, thickness about 3mm / 0.12inch, with precise drilled holes. Easy to install onto the Y carriage holder with screws. Need to work with a silicone 3d printer heater mat. Specailly designed to replace original ultrabase platform Glass bed on ANY CUBIC I3 Mega Pro S machine. Please measure your stock print platform and confirm its shape before ordering to avoid wrong buy.
- 1. Upgrade 3d print bed support: This aluminum hot bed plate is designed to hold 3d printer pei sheet 220 x 220 mm spring steel build plate. CNC precision machining, computer gong precision cutting, precise processing. The cut edges are smooth and the sides are free of fish scales.
8.5Good
View offer on:
Show more
10
UNIDO15% OffPEI Sheet Double-Sided Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 V2-Pro-S1/Ender 5-Pro/Ender 3 V3 SE-KE 3D Printer, Ender 3/5 Series Bed Upgraded 235mm x 235mm
Main highlights- Wide Application: This PEI sheet is 235mm x 235mm, applicable to Ender3, Ender3 Pro, Ender3 V2, Ender3 S1, Ender3 S1 Pro, Ender3 Neo, Ender 3 V2 Neo, Ender5, Ender5 Pro and similarly sized FDM 3D printers. The PEI sheet is also compatible with various build plate types, including the Ender 3 build plate, Ender 3 bed plate, Ender 3 magnetic build plate, PEI build plate, Ender 3 glass build plate, and the Wham Bam flexible build plate, available for printing with PLA, PETG, PEEK, ABS or any other filaments.
- Simple Installation: This 3d printer bed is easy to install. Simply stick the magnetic bottom sheet onto your chosen build plate, and then place the steel platform with PEI surface on top. Easily replace an Ender 3 glass bed, or any other type of platform. The PEI sheet is flexible, removable and sticks to magnetics very well.
- More Affordable and Practical: This build plate is made with 75% thicker PEI and 25% thicker spring steel than similar products on the market, providing a more durable plate that can handle the tough conditions of 24/7 printing. The magnet can sustain high temperatures of up to 120°C, making it wear-resistant and scratch-resistant. Besides, it's really easy to clean with a protective film on the surface of the composite coating, which is anti-scratch and dustproof.
- Great Removal: When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. The surface is easy to remove and flexible, allowing prints to come off the surface easily when it reaches room temperature. After the model printing is completed, just remove the upper magnetic surface from the lower, bend the flexible surface, and watch the model fall right into your hands.
- Excellent Adhesion: Our PEI sheet provides excellent adhesion for your prints, allowing them to stick securely to the printing surface while still being easy to remove. You can print directly onto each side of the double-sided sheet without glue or any other adhesives.
8.4Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for hot parts bed
