Homebrew Connections of 2025
Best Choice1
Home Brew StuffNew 5 Gallon Keg Ball Lock Connections - Homebrew - Single Handle
Main highlights- Made of stainless steel
- Integrated pull ring relief for easy depressurization
- Great for homebrewing beer, soda or tea
- Dual rubber handle
- Ball lock connections
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
NIJUAPPMicro Spray Ball Rotating CIP 1/2" BSPT Connection 1.5" TC(50.5mm) Homebrew Beer Tank 304 Stainless Sanitary Homebrew Beer Hardware(NPT)
Main highlights- Spheres
- Micro Spray Ball Rotating CIP 1/2"BSPT Connection 1.5"TC(50.5mm) Homebrew Beer Tank 304 Stainless Sanitary Homebrew Beer Hardware
9.7Exceptional
View offer on:
Show more
3
NorCal Brewing SolutionsNorCal Brewing Solutions 2 Micron Diffusion Oxygen Stone Flare Connection for Homebrew Beer Brewing Wort Aeration
Main highlights- Perfect for aerating cooled beer brewing wort
- Can be used with "deep water" type aquarium pump
- 316 Stainless Steel
- 2 Micron Pore Openings
- 1/4" MFL Flare Connection accepts standard 1/4" FFL
9.6Exceptional
View offer on:
Show more
4
DbgogoDbgogo Low Profile Keg Coupler, 304 Stainless Steel D System Keg Coupler Space Saving Twist-Activated Homebrew Sankey Keg Tap with Safety Pressure Relief Valve and Connection Tape and Hose Clamp
Main highlights- Reduce Space to Tap Keg: This low profile keg coupler features a space saving design, it has a flat head, the hose will be in a parallel connection. Compared to the basic normal size keg coupler, this coupler will save several inches of vertical height to fit narrower space in your refrigerator!
- Perfect Anti-Leakage Characteristic: The gas barb outlet diameter is 3/8 inch and liquid barb outlet diameter is 1/4 inch, the sankey keg tap barbs have correct size thread to guarantee tight connection with liquid and co2 or gas line. Also comes with hose clamps and extra connection sealing tape to tighten hose and seal the barb further avoiding any possibility of leaking.
- More Flexible Than Handle-Type Low Profile Coupler: This low profile sankey d coupler is easy to operate, you just need to rotate or twist and push down to install to or tap keg. Compared to handle-type low profile coupler, this twist-activated coupler avoids the space of operation handle and is designed with a 180° hose barb allowing one hand control in tight dispensing locations, allows more consistent pours & less foaming of your beverage dispensing.
- Keep Safety and Lower Cost: This beer keg coupler is designed with a pressure relief valve to release excess pressure automatically at 55 psi keeping user safe. it is all made of stainless steel, the quality is as great as the one you buy at local homebrew shops, but you will save money than local stores to get the same thing, stainless will keep the best taste of your beverage, the healthy drinking is "on-the-go"!
- Great Compatibility: This sankey d keg coupler low profile is compatible with North American standard "D" system sankey brand kegs. Perfect for dispensing beer, soda, cider, wine and other carbonated drinks, if you are not fully satisfied with our product, please remember that we are always here for you.
9.3Excellent
View offer on:
Show more
5
MRbrew12% OffMRbrew Wort Chiller 30 Plates, Brazed Plate Copper Heat Exchanger for Homebrew, Stainless Steel 7.5" x 2.9" Plate, 1/2 NPT Thread Connection Hot Liquid Accelerated Cooler Quick Beer Cooling System
Why we love it
Cools wort fast
Low cost water saving
Rust free leak proof
9.1Excellent
View offer on:
Show more
6
Beverage ElementsBarb Adapter and Swivel Nut Threaded 5/16 inch MFL Connection for Homebrew
Main highlights- VERSATILE CONNECTION: Swivel Nut
- QUALITY CONSTRUCTION: Stainless Steel
- CONNECTOR: Adapts your threaded MFL connection to a barb connector
- ADAPTER: 5/16" Barbed Adapter
8.9Very Good
View offer on:
Show more
7
MRbrewMRbrew Wort Chiller 40 Plates, 1/2 Barb Fitting Connection, Brazed Plate Copper Heat Exchanger for Homebrew, Stainless Steel 7.5" x 2.9" Plate, Hot Liquid Accelerated Cooler Quick Beer Cooling System
Main highlights- 【NO LEAKS & RUST-FREE】This wort chiller's plates and fittings are made of 304 stainless steel and have been brazed together with pure copper in an oxygen-free furnace, there is no potential for leaks and rust, can withstand -321F to 392F. Do remember to clean the inlets and outlets to remove metal debris before use!
- 【HIGHLY SAVE YOUR WALLET】This super-efficient chiller uses less water than any other chiller on the market, the wort is flowing through the chambers inside the plate chiller and aerates for your pitching yeast, you will save water and and cost of buying an aeration stone and CO2 canisters, it is especially great for brewers in southern climates!
- 【GREAT UPGRADE】The newly upgraded Barb Wort Chiller is suitable for I.D 1/2'' hose tube. It has extremely low restrictions. Compared with the threaded Wort Chiller, this newly upgraded barbed Wort Chiller is more convenient and can be directly connected to the hose and start cooling work. No need to bother buying other accessories to be compatible with the hose, saving a lot of time!
- 【EASY TO USE AND CLEAN】The Wort Chiller is designed for effortless cleaning—simply rinse with a cleaning solution and water for thorough maintenance. Ideal for both laboratory and home beer brewing, it efficiently facilitates heat exchange between two liquids, saving you time and delivering exceptional cooling performance.
- 【CHILLS WORT IN MINUTES!】MRbrew 40-plate wort chiller cools wort faster than the immersion chiller by increasing surface area covered by cold water and running wort between plate and plate meanwhile. Gone for you are the days of an immension chiller that takes hours!
- 【100% LIFELONG ISSUES SOLVING FOR YOU】Each MRbrew 40 plates wort chiller is backed by unbeatable, reliable, trusted product quality, we will unconditionally solve your problems if you are not satisfied!
8.8Very Good
View offer on:
Show more
8
MRbrewMRbrew Wort Chiller 20 Plates, 1/2 Barb Fitting Connection, Brazed Plate Copper Heat Exchanger for Homebrew, Stainless Steel 7.5" x 2.9" Plate, Hot Liquid Accelerated Cooler Quick Beer Cooling System
Main highlights- 【NO LEAKS & RUST-FREE】This wort chiller's plates and fittings are made of 304 stainless steel and have been brazed together with pure copper in an oxygen-free furnace, there is no potential for leaks and rust, can withstand -321F to 392F. Do remember to clean the inlets and outlets to remove metal debris before use!
- 【HIGHLY SAVE YOUR WALLET】This super-efficient chiller uses less water than any other chiller on the market, the wort is flowing through the chambers inside the plate chiller and aerates for your pitching yeast, you will save water and and cost of buying an aeration stone and CO2 canisters, it is especially great for brewers in southern climates!
- 【GREAT UPGRADE】The newly upgraded Barb Wort Chiller is suitable for I.D 1/2'' hose tube. It has extremely low restrictions. Compared with the threaded Wort Chiller, this newly upgraded barbed Wort Chiller is more convenient and can be directly connected to the hose and start cooling work. No need to bother buying other accessories to be compatible with the hose, saving a lot of time!
- 【EASY TO USE AND CLEAN】The Wort Chiller is designed for effortless cleaning—simply rinse with a cleaning solution and water for thorough maintenance. Ideal for both laboratory and home beer brewing, it efficiently facilitates heat exchange between two liquids, saving you time and delivering exceptional cooling performance.
- 【CHILLS WORT IN MINUTES!】MRbrew 30-plate wort chiller cools wort faster than the immersion chiller by increasing surface area covered by cold water and running wort between plate and plate meanwhile. Gone for you are the days of an immension chiller that takes hours!
- 【100% LIFELONG ISSUES SOLVING FOR YOU】Each MRbrew 30 plates wort chiller is backed by unbeatable, reliable, trusted product quality, we will unconditionally solve your problems if you are not satisfied!
8.7Very Good
View offer on:
Show more
9
ChciyichU Type Keg Coupler - Keg Tap Connection for Guinness, Harp, Smithwick’s, Homebrew Kegerator Parts with 304 Stainless Steel Beer Probe for Home Bar, Draft Beer Tap for 5/16" ID Hose
Main highlights- STABLE PRESSURE CONTROL: Easily release excess pressure with a simple pull of the pressure relief valve. The valve automatically activates when the pressure reaches about 55 psi, preventing over-pressurization and ensuring safe operation
- QUICK INSTALLATION & EASY CONNECTION: Featuring a standard G 5/8 thread and 5/16" inlet and outlet ports, this beer keg tap coupler seamlessly connects to 5/16" ID beer lines and gas lines. Its user-friendly design allows for quick installation and hassle-free setup, so you can enjoy your beer without delay
- LEAK-PROOF SEALS FOR PEACE OF MIND: Equipped with high-sealing silicone gaskets and hose clamps, this beer tap coupler prevents CO₂ and beer leaks, ensuring a secure connection for a steady and reliable pour every time
- COMPATIBLE WITH U-TYPE KEGS: This keg coupler is designed for Guinness, Harp, and Smithwick’s kegs, making it ideal for bars, restaurants, and homebrewing. Enjoy a smooth and consistent beer-pouring experience with ease
- 304 STAINLESS STEEL PROBE FOR PURE FLAVOR: Built with a chrome-plated brass body and a 304 stainless steel beer probe, this keg tap connector ensures that all beer-contacting parts are corrosion-resistant, rust-free, and wear-resistant, preserving the authentic taste of your beer
8.6Very Good
View offer on:
Show more
10
WITPKKLMicro Spray Ball Rotating CIP 1/2"BSPT Connection 1.5"TC(50.5mm) Homebrew Beer Tank 304 Stainless Sanitary Homebrew Beer Hardware(NPT)
Main highlights- Tubes
- Micro Spray Ball Rotating CIP 1/2"BSPT Connection 1.5"TC(50.5mm) Homebrew Beer Tank 304 Stainless Sanitary Homebrew Beer Hardware
8.3Good
View offer on:
Show more
Similar products on Amazon
