10 Best High Current Esc In The Us - Black Friday 2024
FLIPSKY FSESC 75300 84V High Current 350A ESC Base On Vesc with Aluminum Case Water Cooling Enclosure for E-Foil Fighting Robot Surfboard AGV Robot
Main highlights- Voltage:14-84V( safe for 3-20S)
- Supported sensors: ABI, HALL, AS5047,AS5048A
- Size:297*115*45mm((Including the height of water pipes and electrolytic capacitors)
- Max Current :350A
- Flipsky quality produce and good service for you
- EPRM:150000
- Continuous Current : 50V/300A,75V/200A
- Curious about how we select the top products for you? Explore How It Works
FLIPSKY FSESC 75350 84V High Current 350A ESC Base On Vesc with Aluminum Case Water Cooling Enclosure for E-Foil Fighting Robot Surfboard AGV Robot
Main highlights- Warm tips: It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.
- Voltage:14-84V( safe for 3-20S) Continuous Current : 50V/350A,75V/250A Max Current :800A.Supported sensors: ABI, HALL, AS5047,AS5048A.
- Use aluminum alloy case for better heat dissipation effect,which makes ESC more durable.
- Size:200*94.6*50mm((Including the height of water pipes and electrolytic capacitors)
- Input source: PPM, ADC, NRF,UART,PAS Communication ports: USB, CAN, UART,SPI,IIC
INJORA MB100-R80 20A Brushed Mini ESC for 1/24 1/18 RC Crawler Upgrade
Main highlights- Note: Compatible with most of the receiver and remote combinations that with CH2 such as: INJORA transmitters, stock SCX24 black V1 ESC, Flysky GT5, etc. Not compatible with stock TRX4M transmitter.
- Multiple Protection: battery low-voltage protection, over-heat protection, throttle signal loss protection, BEC over current protection, and short circuit protection.
- Linear throttle response gives you more control and smoother driving experience.
- ESC is IP67 waterproof ratings fully waterproof design.
- DEO(Dynamic Electronic Overload) provides smoother power delivery, better control, and overload protection for improved performance in RC Crawlers and similar vehicles.
- Come with a built in 6V BEC. Equipment needed (not included): Transmitter & Receiver.
HOBBYWING EZRUN MAX10 G2 140A ESC
Main highlights- The smart start-stop technology is introduced to the Max10 G2 ESC. The frameless fan will not be enabled to reduced noise and saving power. The fan will only work when the temperature rises to a certain level.
- The IP-67 waterproof system guarantees excellent waterproofing and dustproofing protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit.
- The EzRun Max10 140A G2 features an improved waterproof sensored cable interface and an upgraded sensored mode to achieve a great sense of control feel and perfectly matches the EzRun 3652/3665 SD G3 motors.
- Supports Turbo timing adjustment of up to 32 degrees, and in combination with the EzRun 3652/3665 G3, the maximum speed is 25% more with greater effect.
- Smart freewheeling technology enables the MAX10 G2 to have higher drive efficiency than the previous generation, resulting in lower operating temperatures and a minimum temperature of approximately 25°C lower than the previous generation.
- Compared with the previous generation of the MAX10 ESC, the total capacitance of the capacitor is increased by 74% and is overheating protected. The functions improve the power delivery from the battery to the ESC to avoid it from overloading and causing capacitors to explode.
- After connecting the ESC with the OTA Bluetooth module, you can view the data (throttle amount, voltage, current, temperature, speed and etc) in real time through the mobile app to know the running status; The history of the running status can also be viewed by data logging.
FLIPSKY 75200 FOC 84V High Current Single ESC with Aluminum PCB for Electric Skateboard/Scooter/Ebike Speed Controller
Main highlights- Warm tips: It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.
- Voltage: 14-84V (safe for 4-20S).Support various control modes: Current / Duty cycle / Speed / PID control modes.
- Use aluminum alloy case for better heat dissipation effect,which makes ESC more durable.
- Continuous current: 50V/200A; 75V/150A (Values depend on the mounting, ambient temperature and air/water circulation around the device!); Burst: 300A
- Communication Ports: USB, CAN, UART, SPI, IIC Supported Sensors: ABI, HALL, AS5047, AS5048A Input Source Support: PPM, ADC, NRF, UART
FLIPSKY 75200 FOC 84V High Current Single ESC with Water Cooling Enclosure for Electric Skateboard/Scooter/Ebike Speed Controller
Main highlights- Warm tips: It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.
- Voltage: 14-84V (safe for 4-20S).Support various control modes: Current / Duty cycle / Speed / PID control modes.
- Use aluminum alloy case for better heat dissipation effect,which makes ESC more durable.
- Continuous current: 50V/200A; 75V/150A (Values depend on the mounting, ambient temperature and air/water circulation around the device!); Burst: 300A
- Communication Ports: USB, CAN, UART, SPI, IIC Supported Sensors: ABI, HALL, AS5047, AS5048A Input Source Support: PPM, ADC, NRF, UART
Spektrum Firma 85A Brushless Smart ESC / 3300Kv Sensorless Motor Combo, SPMXSEMC01, Black
9.5 Water tight9.5 Noise level9.3 Easy installationWhy we love it
Optimized performance: With a 3300Kv Sensorless Motor, this combo ensures optimal performance.Easy to use: The Spektrum Firma 85A Brushless Smart Esc is designed to be easy to use.Lightweight: At only 0.44 pounds, this combo is lightweight and easy to handle.GoolRC 120A Brushless ESC Waterproof Electric Speed Controller for 1/8 1/10 RC Truck Off-Road Car
Main highlights- Waterproof and dustproof, perfectly fit for 1/10 1/8 RC car.
- Strong resistant current capability and excellent heat dissipation, Easily programmed and compatible with pocket-sized program card.
- Protection function includes low voltage cut-off protection, over-heat protection, throttle signal loss protection and motor blocked protection.
- High-frequency drive system and Low-resistance field effect tube enhances load capacity and improve the utilization rate of power source.
- High current capability of 120A continuous current and 600A burst current ensures a stable driving.
RC Motor & ESC Combo Set,1:10 F540 4370KV Brushless Motor and 60A ESC with Electric Speed Controller Program Card for 1/10 RC Off Road Car Trucks
Main highlights- With ESC Programmer: The Program card is used to control braking force. the max brake force: 25A, 45A, 60A is 50%, 25%, 75%, 100% (default 50%); and 80A, 120A is 25%, 50%, 75%, 100% (default 25%). The maximum reversing force is 25%, 50%, 75%, 100% (default 25%)
- Profession Brushless ESC: The 60A Brushless ESC is universal fit most 1/10 scale rc car. with excellent start-up,acceleration and linearity features, strong resistant current capability. Notice: the 60A ESC is best to use 2S battery, please do not use this 60A ESC together with 3S battery or above 3S battery to avoid short circuit!
- Multiple Protection: The motor and esc combo with multiple protection,such as low voltage cut-off protection for lithium or nickel battery,over-heat protection, throttle signal loss protection and motor blocked protection
- Exquisite Workmanship and High Quality Motor: Universal fit motor, exquisite workmanship, which is 4 poles 12 slot Hi-torque motor design, CNC machined 6061 T6 billet aluminum heatsink can, highPurity copper windings maximizes eficiency and precision balanced rotor, smoothness for best reliability and maximum RPM
- 1/10 Scale RC Car Motor and ESC Combo: Complete F540 4370KV sensorless brushless motor and 60A brushless ESC with ESC programming card, IP65 waterproof level and dustproof for all weather races. You can use them together or separately according to your needs
Black Friday Sale
Deal ends in
HrsMinSec