10 Best Heatsink Stepper Motors In The Us - Black Friday 2024
Best Choice1
uxcelluxcell Heatsink with Hole for Stepper Motor,3D Printer 40x40x11mm Golden 4pcs
Main highlights- [PARAMETER] Overall Size: 40 x 40 x 11 mm / 1.57 x 1.57 x 0.43 inch (L*W*H); Color：Gold Tone.
- [NOTE] Some scratches may be caused in the production process, but this does not affect the cooling effect.
- [FEATURE] With smooth surface.It only take seconds to install, easy to install.
- [DESCRIPTION] This heatsink come without any thermal tape or adhesive tape, we recommend using some glue (here is not included) to stick.
- [APPLICATION] Great for cooling chips, stepper motor driver module and other small electronics that didn't come with any cooling.
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
HiLetgoHiLetgo 5pcs A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Reprap Suitable for Mendel Huxley Arduino
Main highlights- Simple step and direction control interface,Take anti-static measures before you use the A4988 modules in case of short-circuit
- Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step. Output drive capacity of up to 35 V and ± 1.2 A
- Adjustable current control lets you set the maximum current output with a potentiometer
9.5Excellent
View offer on:
Show more
3
EasycargoEasycargo 40mm Heatsink Kit 40mmx40mmx20mm + 3M8810 Thermal Conductive Adhesive Tape, Cooler Aluminium Heat Sink for Cooling 3D Printers Stepper Motor TEC1-12706 Thermoelectric Peltier Cooler 40x40x20
Main highlights- Weight: 1.2 oz / 35 gr per unit
- Pre-applied 3M 8810 thermal conductive double side adhesive tape backing
- Dimension: 1.57 x 1.57 x 0.43 inch / 40x40x20mm (L*W*H)
- Can be applied for passive cooling of 3D printers stepper motor, NEMA 17, TEC1-12706 Thermoelectric Peltier Cooler etc.
- 40mm anodized aluminum heatsink
9.4Excellent
View offer on:
Show more
4
uxcelluxcell Heatsink with Hole for Stepper Motor,3D Printer 40x40x11mm Black 4pcs
Main highlights- [PARAMETER] Overall Size: 40 x 40 x 11 mm / 1.57 x 1.57 x 0.43 inch (L*W*H); Color：Black.
- [NOTE] Some scratches may be caused in the production process, but this does not affect the cooling effect.
- [FEATURE] With horizontal and vertical cooling slots.It only take seconds to install, easy to install.
- [DESCRIPTION] This heatsink come without any thermal tape or adhesive tape, we recommend using some glue (here is not included) to stick.
- [APPLICATION] Great for cooling chips, stepper motor driver module and other small electronics that didn't come with any cooling.
9.2Excellent
View offer on:
Show more
5
JienkJienk 4PCS Black Aluminum Heat Sink with Thermal Conductive Adhesive Tape, 40×40×20mm Heatsink Cooler for Cooling VRM GPU Stepper Driver 3D Printer Stepper Motor
Main highlights- This 40mm heatsink kit is suitable for a variety of cooling applications such as 3D printer stepper motor NEMA17, PC chipset, power IC, power electric device, TEC1-12706 Thermoelectric module, LED light devices etc.
- Pre-applied blue thermal conductive adhesive tape backing, easy attach to the application with no cutting to do.
- Easy to install, Can be used with other devices to cool processors, regulators, etc.
- Aluminum alloy, great function for heat dissipation. Reduces CPU and LAN Temperature in enclosed and overclocked environments.
- 40mm anodized aluminum heatsink; Dimension: 1.57 x 1.57 x 0.79 inch / 40 x 40 x 20mm (L*W*H)
9.0Excellent
View offer on:
Show more
6
SGTKJSJS3D Printer Heatsink Kit + Thermal Conductive Adhesive Tape, Cooler Heat Sink Cooling TMC2130 TMC2100 A4988 DRV8825 TMC2208 Stepper Motor Driver Module (22pcs)
Main highlights- With thermal conductive adhesive tape backing
- Stepper motor driver module is not included
- Includes 22 pieces blue aluminum heatsink
- Dimension: 0.35 x 0.35 x 0.47 inch / 9mm x 9mm x 12mm (L*W*H), Weight: 0.04 oz / 1 gr per piece
- Can be applied for passive cooling of Stepper Motor Module TMC2130 TMC2100 A4988 DRV8825 TMC2208
8.9Very Good
View offer on:
Show more
7
FYSETCUpgrade Stepper Motor Driver Heatsink, FYSETC 10pcs 3D Printer Parts Anodized Aluminum Heatsink 3D Printer Cooler for Raspberry Pi LV8729 A4988 DRV8825 TMC2208 TMC2100 TMC2130 Driver Module, Blue
Main highlights- Ｍaterial: Adopting special design and Anodized aluminium material to achieve faster heat dissipation. The fins increase the area of board and improve the cooling effect.
- Size(LWH): Approx.10 x 10 x13 mm/ 0.39" x 0.39" x 0.51".
- Quality: High quality and durable with long service life. These sinks are beloved by our favorite engineers for their low cost, ease of use and low thermal resistance!.
- Package includes: 10 x Stepper Driver Heatsink with Back Glue, easy to install.
- Application：Excellent 3D Printer heat sinks with back adhesive: Work well for 3D Printer Reprap MKS Gel stepper motor driver and other motherboard.
8.7Very Good
View offer on:
Show more
8
EasycargoEasycargo 40mm Heatsink Kit 40x40x11mm + 3M 8810 Thermal Conductive Adhesive Tape, Cooler Heat Sink for Cooling 3D Printer Stepper Motor TEC1-12706 Thermoelectric Peltier LED 40mmx40mmx11mm Goldentone
Main highlights- Weight: 0.6 oz / 17 gr per pc
- Pre-applied 3M 8810 thermal conductive double side adhesive tape backing
- Dimension: 1.57 x 1.57 x 0.43 inch / 40x40x11mm (L*W*H)
- Can be applied for passive cooling of 3D printers stepper motor, NEMA 17, TEC1-12706 Thermoelectric Peltier Cooler etc.
- 40mm anodized aluminum heatsink
8.6Very Good
View offer on:
Show more
9
AwxlumvAwxlumv 40mm Heatsink Kit 40x40x20mm with Thermal Conductive Adhesive Tape, Aluminum Heat Sink Cooler for Cooling 3D Printer Stepper Motor Driver NEMA 17 TEC1-12706 Peltier Plate Module GPU Router
Main highlights- 5. Weight: 0.94 oz / 26.9 gr per pc
- 4. Dimension: 1.57 x 1.57 x 0.79inch / 40x40x20mm (L*W*H)
- 3. These heat sinks perfect fit for cooling of 3D Printer Motor, NEMA 17, TEC1-12706 Thermoelectric Peltier Cooler etc. Also for GPU backplate/ LED light/ Wi-Fi Routers/ Power Supplies and so on.
- 2. Pre-applied blue 3M8810 thermal conductive adhesive tape backing
- 1. 40mm anodized aluminum heatsink
8.4Good
View offer on:
Show more
10
Awxlumv10% OffAwxlumv 4PCS Heat Sink Kit 40x40x20mm/ 1.57"x1.57"x0.79" Anodized Aluminium Heatsink Sync Cooler 40mm for 3D Printer Stepper Motor Heat Sinks Cooling Fins for GPU Led Thermoelectric Peltier Computer
Main highlights- 6. Package: 4PCS x heat sink 40mm x 40mm
- 5. Thermal conductive glue adhesive is the excellent partner to install the heat sink (gel is not included in the package)
- 4. This 40mm heatsink kit is suitable for cooling applications such as 3D printer stepper motor, NEMA17, TEC1-12706 Thermoelectric module, PC chipset, power IC, power electric device, LED light devices etc. For heat dissipation device, great function for heat dissipation reduces CPU and LAN.
- 3. Unit weight: 1.45 oz / 41 gram per piece; Base Board thicknesses: 4.2mm/ 0.17inch; Fin thicknesses: 1.3mm/ 0.05inch; Fin Spacing: 2.52mm/ 0.1inch
- 2.Dimension: 1.57"x1.57"x0.79" (L*W*T) 40mmx40mmx20mm.
- 1. Improved version 2024, 40mm anodized aluminum heat sinks, flatter base plate and thick enough base material. Smooth surface without scratches and burrs.
8.3Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for heatsink stepper motors
