Heatbed 330x330 Peis of 2025
Best Choice1
FYSETC330x330mm Double Side Texture PEI Build Plate - FYSETC Neptune3 Plus Part - Flexible Spring Steel Sheet: Neptune4 Plus Heated Bed Cover Fit QiD X-Max Core-XY Trox X5SA Pro Geetech A30 Pro
Main highlights- 5. Simple Use and Maintence: A perfect replacement for original glass platform or diy your own 330mm print bed. Removable, high strength and heat resistance, Three-Layer design, thicker and more durable. Easy instal: simply stick the magentic sheet onto heated bed, then place the steel platform with PEI surface on the top. After installing, do a bed level with the auto bed leveling sensor. Then start your print journey. Regular clean with warm water or alcoholl help get a good adhesion
- 4. Wide Filament Compatibility: Fit most 3d printing material, such as PLA, PETG, TPU, PEEK, etc. Especially more friendly to high temp material ABS than PEO PEY sheet. Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on each side of the double sided PEI sheet without any glue or other tools to help the model to stick onto the sheet. A 3d printer dust cover would help work better if printing ABS which needs bed temp over 80℃
- 3. 330mm 330mm PEI: Size:330x330mm/13x13inch is compatible with Neptune3 Plus, Neptune4 Plus, QID X-max3, Flsn Core-XY,Tronx X3S / X5S / X5S Pro 3D Printer or other similiar hot bed. Our spring steel plate's thickness is about 0.7mm, much Thicker, more stable and durable than others, which costs more. If you are not sure, you can contact us or measure your heated aluminum plate bed to avoid wrong buy, 325x325 build plate, 320mm x 320mm build plate, if you can accept 1-10mm, get it
- 2. Great First Layer Adhesion: No glue, No tap. Setting an appropriate Z-off Value is VERY important. If too low, the 3d printing material buildup or no extrusion on the bed. If too high, the prints come off the print surface, can't stick well. Recommend to Turn OFF the cooling fan and Slow Down the speed to 10-25mm/s when printing the first few layers. And a clean bed, a dry filament and hems adding also help get a good bed layer
- 1. Double Sided Textured PEI Print Bed 0.7mm: Compared with smooth PEI or colorful PEY sheet, flexible steel bed with Dual Sided PEI surface is excellent. Adopt 0.5mm original material, other than 0.3 or 0.4mm, thicker platform, better heat saving, longer lifespan. The matte texture makes it easier for the printing material to adhere, more stable. This 330mm by 330mm plate kit is combined with 2 parts, a flexible steel coated with frosted PEI and a magletic bottom with adhesive on the back
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
HICTOPHICTOP 330 * 330mm Double Sided Textured Pei Sheet and Magnetic Build Plate with Adhesive for Elegoo Neptune 3 Plus/4 Plus,A30/ A30 Pro,Tronxy X3S / X5S / X5S Pro,Flsn Core-XY 3D Printers
Main highlights- 5 The size of HICTOP PEI bed is 330*330mm（13*13inch）, it is applicable with Creality 3D printer such as A30/ A30 Pro，Tronxy X3S / X5S / X5S Pro，Flsn Core-XY, Tron-X3S/X5S/X5SA Pro, Geetech A30/Pro, Rise 3D Pro2/ Pro2 Plus/ N1 / N2/ N2 Plus 3D printers
- 4 Prints come off 330*330mm pei sheet easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it
- 3 Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃
- 2 The HICTOP textured PEI is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed
- 1 The HICTOP double sided pei 330*330mm is combined with 2 parts, a flexible steel platform coated with textured PEI surface on both sides and a magnetic bottom sheet with adhesive on the back
9.6Exceptional
View offer on:
Show more
3
Shion.Kwoo15% OffUpgraded 330x330mm Smooth/Textured PET+PEI Sheet for Neptune 3 Plus,4 Plus, Qid X max 3,Core-XY Build Plate Magnetic Flexible Bed for Troxy X3S/X5SA Pro,Geetch A30 Pro 3D Printer.
Main highlights- 【Usage Guidelines】: Attention should be paid to the nozzle-to-surface distance to prevent permanent scars. Regular cleaning with alcohol or a cleaning agent is recommended to maintain surface cleanliness. Dirt and oil stains can reduce print adhesion and affect the clarity of the carbon fiber-like pattern on the PET surface. In extreme conditions such as humid filaments, intricate models, or high-speed printing, adjusting speed and increasing bed temp are recommended
- 【Product Features】: For the PET+PEI steel plate, the PET surface exhibits a pattern resembling carbon fiber. The intersection of gloss and matte surfaces forms a striped pattern, creating a three-dimensional and orderly print surface with a distinctive texture. It can withstand temperatures up to 120°C, making it ideal for low-temp filaments like PLA and PETG. The PEI coating presents a delicate matte texture, exuding a calm and stable quality for ABS, with a high-temp resistance of up to 300°C
- 【Premium Materials】: In addition to acquiring thick PET film and our proprietary high-adhesion PEI formula, we use a 0.4mm thick stainless steel plate that is resistant to deformation and rust. With high flatness and ample toughness, it provides strong adhesion, making it extremely user-friendly. We have extensively tested and verified the results on various machines.
- 【Our Promise】: We guarantee the quality and performance of our double-sided textured PET+PEI printing plate. Your queries and suggestions are our priority, and we promise a prompt response within 24 hours. Thank you for choosing our product. Our team is ready to assist you with personalized services tailored to your unique requirements through the platform's messaging system.
- 【Compatibility】: Size：330x330mm, it fits perfectly with the Flsu Core-XY,Troxy X3S/ X5SA/X5SA Pro,Geetch A30,A30 Pro,Qid1 X-Max3, Neptun 3/4 Plus/Rais 3D Pro 2/Pro 2 Plus 3D Printer. If you're uncertain, feel free to contact us directly for assistance. As both manufacturers and printing enthusiasts, we use our own products for printing and creative work. We believe that a scientific approach enhances both print quality and the joy of the process; however, it's not magic or mythology.
9.4Excellent
View offer on:
Show more
4
G-Hubble330x330mm PEI Sheet for Qid X max 3,Neptune 3/4 Plus,Geetch A30 Pro Double Sided Textured/Smooth Build Plate for Flsn Core-XY,Tronxy X3S / X5S / X5S Pro,Raise MAX 3 Pro 2/Pro 2 Plus 3D Printer.
Main highlights- 【Quality Promise】: NO Magnetic Sticker inside,please notice!!! All products have UNDERGONE QUALITY INSPECTION before delivery. If you have any questions about product quality and suggestions, please feel free to contact us and we will reply within 24 hours.
- 【Good Quality】: We prioritize 100% imported PEI raw film renowned for greater thickness and enhanced adhesiveness, making it ideal for PLA, PETG, PEEK, ABS, and more. Despite a higher cost than PET/PEO, PEI's exceptional performance—especially in high temperatures—positions it as a superior investment. Additionally, our inclusion of a thick stainless steel plate, explicitly rejecting inferior materials, guarantees resilience and flatness during transportation, extending its life.
- 【Exceptional Initial Adhesion】: Rigorous testing substantiates our claim that models firmly adhere to the print bed surface. Even novices can effortlessly achieve impeccable prints. Our double-sided PEI spring steel build plate, featuring both a smooth film for a flawless finish and a textured spray for a matte effect, stands out for its cost-effectiveness compared to designs utilizing similar materials.
- 【Ease of Disassembly and Utilization】: Dispensing with the need for adhesives or specialized textured papers, the spring steel plate merely requires thorough cleaning before placement on the printer's heated bed. Once adequately heated, printing commences effortlessly. Post-printing, a simple bend facilitates the easy removal of the model without necessitating additional tools. (Please ensure removal of the factory protective film from the smooth surface before usage).
- 【Considerations】: Sized at 330x330mm, it fits Qidi x max 3,Geetch A30 Pro,Neptune 3 Plus/Neptune 4 Plus, Flsn Core-XY,Tronxy X3S / X5S / X5S Pro,Raise MAX 3 Pro 2/Pro 2 Plus,A30/ A30 Pro and similar-sized 3D printers. Be cautious about nozzle-to-PEI distance to avoid scratches. Any damage or contamination on the PEI surface affects longevity and print quality. Despite our confidence, recognize this product's consumable nature. Longevity depends on usage frequency and handling. Thanks for your loyalty; consume judiciously for sustained support.
9.1Excellent
View offer on:
Show more
5
HzdaDeveHzdaDeve PEI PEO Sheet 330X330MM Build Plate Heated Bed Spring Steel Flexible Platform One Side Textured One Side Smooth Board for Neptune 3/4 Plus/Tronxy X3S/X5SA/X5SA Pro/Raise MAX3 Pro 2/Pro 2 Plus
Main highlights- Special Material: made of Polyethylene which is inherently flame resistant and low in smoke production, high strength and heat resistance.
- Excellent adhesion with one side textured spray PEI and one side diamond smooth surface PEO spring steel plate, it has strong adhesion to adhere the model in a better way. You can use either side.
- Excellent Flatness: It provides the most flat build surface in the market, ensuring high flatness for the bottom of print, to make sure the model can be firmly attached to the surface of the print platform.
- Easy for removal: Peel up the top part from the heat bed and bend it to take off models easily as it’s flexible.
- Compatible Printer: The PEI and PEO build plate is for Neptune 3 Plus/Neptune 4 Plus/Tronxy X3S/X5SA/X5SA Pro/Raise MAX3 Pro 2/Pro 2 Plus.
9.0Excellent
View offer on:
Show more
6
TRONXY16% OffTRONXY PEI Sheet Build Plate, Flexible Magnetic PEI Build Surfaces for 3D Printer Heated Bed 330x330 mm, Removable PEI Spring Steel Platform for X5SA/X5SA PRO Hot Bed, Easy to Remove Model
Main highlights- Triple Reinforcement: Surface PEI film - strong adhesion; Inner spring steel plate - flexible and elastic, not easy to deform; Bottom magnetic base - good magnetic and temperature resistance, can withstand high temperature of 130 ℃ for a long time
- Premium Features: Flexible, high-strength, heat-resistant, strong magnetic removable PEI build plate, no glue or textured paper required, magnetic base, use it to print directly
- PEI Sheet: Size 330x330x2 mm, PEI coating thickness 0.4 mm. Flexible magnetic PEI platform, strong magnetism, no bubbles, no warping when printing, anti-scratch, high surface flatness
- Long life: PEI bed can withstand the countless heat cycles that the 3D printing bed goes through from print to print, as well as multiple bends without compromising elasticity
- Easily Remove: After hot bed temperature cools down, easy get the 3D model, slightly bend to eject your prints instantly, no tools required, no need to worry about model damage
8.9Very Good
View offer on:
Show more
7
WefuitWefuit PEO PEI Sheet 330X330mm Build Plate Heated Bed,Smooth PEO+Textured PEI Spring Steel Sheet for Neptune 4 Plus/3 Plus/Tronxy X3S/X5SA/X5SA/Raise MAX3 Pro 2/Pro 2 Plus Pro/QIDI X-Max3 3D Printer.
Main highlights- 【Support Various Filaments】For PEO build plate we suggest PLA, TPU, PETG. PEI surface can prints PLA, PETG, ABS, TPU, ASA, PVA, PET, PA, PC etc.we recommend these filaments and temperatures for your PEO+PET printing plate “PLA: 60~65℃; PETG: 70-80℃”,If you want to print other filaments, please adjust the parameter.
- 【Super Toughness】330x330mm hot bed is made of spring steel plate. It can be easily adsorbed on the platform with strong magnetism and is not easy to move. The surface is flat. The base of the plate is thick and elastic, and the 3D printed model can be easily removed by gently bending.
- 【How to clean and maintain】It is recommended to perform regular cleaning and maintenance. The surface of diamond PE0 can be wiped with a wet tissue to remove surface dust and fingerprints, and then dried with a dry tissue. Acetone cannot be used to clean the surface of textured PEI, as it can cause irreversible damage. It can be cleaned with detergent and water.
- 【Double Sided Textured PEO+PEI Build Plate】The spring steel bed plate is come with 2 printing textures. One side is Diamond PEO surface which can print excellent mosaic pattern. Other side is textured PEI which can print frosted models.
- 【Compatible 3D Printer】Our double-sided textured PEO+PEI build plate fit 3D printers with a platform size of 330x330 for elegoo Neptune 4 Plus/Neptune 3 Plus/Tronxy X3S/X5SA/X5SA/A30/A30 Pro/Raise MAX3 Pro 2/Pro 2 Plus Pro/QIDI X-Max3 3d printers.Please confirm your 3D printer platform size before ordering.
8.8Very Good
View offer on:
Show more
8
IdeaFormer IR3IdeaFormer 310x310mm Double Sided Printing Smooth PEO+Textured PEI Flexible Spring Build Surface Sheet Heatbed for Artillery SW-X1/X2, Anet A8 Plus,Ender 3 Max CR10 3D Printer (with Magnetic Base)
Main highlights- 【PEO+PEI Build Plate Design + Magnetic Build Plate Base】The PEO+PEI build plate is double sided coating. One side is a smooth PEO coating, the underside of the printed model is smooth and the model is easy to remove and clean. The other side is PEI frosted surface, the frosted sticker surface presents a distinctive frosted touch, provides higher adhesion for the model and pressure without warping. There is Magnetic Sticker Base.
- 【High Resistance】The PEO print bed surface is resistant to high temperature 120℃ and the PEI coating is 260℃.
- 【Compatible Filaments】PEO build surface only prints PLA filament; PEI surface plates print most filaments like PLA/ABS/PETG/TPU/Nylon.
- 【Attention】Our double-sided textured PEI+PEO build plate fits for 3D printer with 235x235mm platform size. Please confirm your printer platform size before ordering.
- 【After-Service】If you have any further questions, please read our Q&A or send us an email. Our service staff and technicians will be happy to help you.
8.6Very Good
View offer on:
Show more
9
AramoxPEI Flexible Print Bed 330x330mm Double Sided Textured Build Plate for QIDI XMaximum 3D Printer, Easy to Clean, Suitable for Troxy X3S, Geetch A30, High Temperature
Main highlights- [VERSATILE FILAMENTS] Works well with a variety of filaments such as PLA, TPU, PETG, ABS, and Nylon.
- [SIMPLE SETUP] Direct installation and use of this textured PEI sheet for hassle- printing.
- [MAINTENANCE MADE EASY] Keep the clean with regular water and alcohol cleaning routines.
- [EASY TO CLEAN] Enhance adhesion by using isopropyl alcohol and a no-lint towel before printing for better results.
- [COMPATIBLE ] Designed for Flsu XY, Troxy X3S, X5SA, Geetch A30, Qidi X-Maximum 3, and more 3D printers.
8.5Good
View offer on:
Show more
10
evhooePEI Build Plate, 330x330mm Double Sided Textured Flexible Print Bed for Qidi, Troxy, Flsu XY, Geetch, Neptun, Rais 3D Pro 2, Easy to Remove Model with isopropyl alcohol
Main highlights- MAINTENANCE AND APPLICABLE FILAMENTS: Clean the regularly with water and alcohol or IPA for optimal adhesion. Recommended the filaments is PLA, TPU, PETG, ABS, Nylon etc. and the high temperature of the heat bed is not exceeding to 260℃
- EFFORTLESS MODEL REMOVAL: When the build plate cool down to the room temperature, no need other tools and the model effortlessly separates from the plate
- EASY TO CLEAN: For better adhesion, please spray with isopropyl alcohol and wipe the build plate with a no lint towel before use, any bit of grease or rest makes your prints non stick
- DOUBLE SIDED PRINT: This is a Double Sided Textured PEI plate for QIDI X-Maximum 3 printers which present different textures, double sided printing. Size is 330x330mm
- APPLICABLE MODEL: Double sided textured PEI sheet fits perfectly with the for Flsu XY, for Troxy X3S, X5SA, X5SA Pro, for Geetch A30, A30 Pro, for Qidi X-Maximum 3, for Neptun 3, 4 Plus, Rais 3D Pro 2, Pro 2 Plus 3D printer
8.2Good
View offer on:
Show more
Similar products on Amazon
