Heat Block Nozzles of 2025
Best Choice1
ENOMAKERBamboo Lab P1P, P1S Hotend Complete Kit for P1 Series 3D Printer, Full Assembly Hardened Steel Hot End with Fan, Thermistor, Ceramic Heater, 0.4mm Nozzle, and Extruder Heating Block Replacement
Main highlights- 【Unique Integrated Nozzle】The nozzle is integrated into the heat block and connected to the heatsink via a fine metal tube for optimal performance. With this design, the hotend heats up much faster than a traditional hotend, and the integrated structure effectively reduces potential issues when replacing the nozzle.
- 【Safety Cooling Fan】The cooling fan for hotend has an auto-shutoff function while being locked at rated voltage for 1-3 seconds. The circuit attempts torestartin 2 to 6 seconds. There is no damage after 72 hours of locking.
- 【Integrated Heater & Thermistor Module】The ceramic heater and thermistor are combined into one module with an integrated terminal connector. With this design, the reliability of the terminal connector under extreme conditions is improved.
- 【Fast Heating & Accurate Temp】The ceramic heater can heat the nozzle up to 300℃ while the thermistor has highly accurate temperature measurement and reliable structural design.
- 【Bamboo Lab P1P, P1S hotend complete kit】Full assembly hardened steel hot end with fan, thermistor, ceramic heater, 0.4mm nozzle,heating block replacement. It is compatible with common 3D printing filaments such as PLA and PETG etc.
- Hassle - free installation
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
ENOMAKERBamboo Lab X1 Carbon, X1, X1C Hotend Complete Kit for X1 Series 3D Printer, Full Assembly Hardened Steel Hot End with Fan, Thermistor, Ceramic Heater, 0.4mm Nozzle, Extruder Heating Block Replacement
Main highlights- 【Unique Integrated Nozzle】The nozzle is integrated into the heat block and connected to the heatsink via a fine metal tube for optimal performance. With this design, the hotend heats up much faster than a traditional hotend, and the integrated structure effectively reduces potential issues when replacing the nozzle.
- 【Safety Cooling Fan】The cooling fan for hotend has an auto-shutoff function while being locked at rated voltage for 1-3 seconds. The circuit attempts torestartin 2 to 6 seconds. There is no damage after 72 hours of locking.
- 【Fast Heating & Accurate Temp】The ceramic heater can heat the nozzle up to 300℃ while the thermistor has highly accurate temperature measurement and reliable structural design.
- 【Bamboo Lab X1,X1C,X1 Carbon hotend complete kit】Full assembly hardened steel hot end with fan, thermistor, ceramic heater, 0.4mm nozzle,heating block replacement. It is compatible with common 3D printing filaments such as PLA and PETG etc. [not suitable for X1E]
- Hassle - free installation
9.6Exceptional
View offer on:
Show more
3
DODOBEIDODOBEI High Temperature All Metal Bimetal Heatbreak Plated Copper Nozzle Heater Block Upgrade Kit Compatible with Anycubic Vyper Kobra Max/Kobra Plus, I3 Mega, Mega S/Pro Volcano Hotend 3D Printer
Main highlights- there is a silicone cover coming, NOTE: If the printing temperature is above 300C degrees, please remove the silicone sock.
- Upgrade Nozzle: Made from Copper, Nickel plated, applicable for high temperature non abrasize printing, can reach at Max 550C degree. Nickel plating provides a reduced-stick surface, ideal for situation which temperature is too hot for a silicone sock. High precision, the input and output holes are concentric and the interior of nozzle is smooth without burrs.
- This is a direct upgrade for 1.75mm AC Vyper Kobra Max Kobra Plus 3D printer, This kit also compatible with upgrading Mega S, I3 Mega, Mega pro 3D Printer to be Volcano Hotend. BUT PLEASE KNOW CANNOT WORK FOR Kobra, kobra neo, Kobra Go printer
- Copper alloy heating block with nickel plated is specifically designed for ultimate high temperature performance, which can reach 500 °C and the thermal conductivity is greatly increased, very suitable for high-temperature applications and printing at work Daily consumables such as PLA and ABS are perfectly matched.
- Bimetal Heatbreak: Combined with two components, Made from titanium alloy TC4 + plated copper, real bimetal heatbreak. Two components with different thermal conductivity to improve the heat dissipation efficiency. Smooth reduce blocking, High temperature resistance, Slow heat conduction.
9.5Excellent
View offer on:
Show more
4
Creality13% OffOfficial Creality Sprite Extruder Heater Block Upgrade Kit, Bimetal Copper Titanium Heatbreak Plated Copper Nozzle,300℃ High Temperature Pro,Fit for Ender 3 S1,S1 Pro, CR-10 Smart Pro
Main highlights- 【Package include】- Plated chrome Copper & Titanium Alloy Throat Tube x1, Heating Block x1, Silicone sock x1, Nickel Copper plated nozzle x1 (if your printing temperature is over300C, please remove the silicone sock before printing).
- 【Nickel Copper Plated Nozzle】- It has smooth inner hole and outer surface, which is more smooth and stable for material extrusion. It can be applied to all kinds of materials, such as ABS, nylon, PEEK, etc., The maximum working temperature is 500°.
- 【Especially for Sprite Extruder】- This upgrade heater block compatible with installed sprite extruder 3d printer, such as Ender 3 S1, Ender 3 S1 pro, CR10 Smart pro, Sermoon V1, Sermoon V1 Pro.
- 【Bimetal Heatbreak Throat Tube】- Using TC4 titanium alloy and copper two kinds of metal processing, titanium alloy has good thermal insulation, copper to help heat dissipation.For a long time of printing has an obvious role in improving the quality of printing.
- 【100% Satisfaction Service】- We provide lifetime professional technical supports,If you have any problems during installation and use, please feel free to contact us, we would reply you within 24 hours.
9.4Excellent
View offer on:
Show more
5
HzdaDeve17% OffHzdaDeve 2 Pack Hotend 200K Thermistor Heating Cartridge for Kobra S1 Combo 0.2MM 0.4MM Print Head Extruder Kit Hot End Heater Block Brass Nozzle Silicone Sock Cover for Anycubic Kobra S1/ACE Pro
Main highlights- Simple Installation: Remove the old hot end and install the new hotend to start. (Heating tube, thermistor, nozzle etc are pre-installed)
- Package Included: 1 set 0.2MM hotend kit + 1 set 0.4MM hotend kit (heater cartridge, thermistor, heat block,throat tube, nozzle, silicone cover)
- Nozzle and hot block: The seamless connection between the nozzle and heat breakage accelerates the nozzle to dissipate heat, and the heat breakage to insulate, and releases the nozzle blockage.
- Notice: This is upgraded 200K thermistor which has no temp issue.
- Filament material: The print head for Anycubic Kobra S1 works with 1.75 mm PLA/ABS/PETG/TPU/Wood filament.
- Compatible Printer: This hardened hotend kit replacement is compatible with Anycubic Kobra S1/Combo/ACE Pro FDM 3D printer.
9.1Excellent
View offer on:
Show more
6
HzdaDeveHzdaDeve Hotend for I3 MK4/XL Hot End Kit Print Head Integrated Brass Nozzle Heat Block Heating Cartridge Thermistor Silicone Cover for Prusa MK4 MK4S MK3.9 MK3.9S XL Core One 3D Printer
Main highlights- Simple Installation: Remove the old hot end and install the new hotend to start. (Heating tube, thermistor, nozzle etc are pre-installed)
- Package Included: 1 set hotend kit (heater cartridge, thermistor, heat block, nozzle, silicone cover)
- Nozzle and hot block: The seamless connection between the nozzle and heat breakage accelerates the nozzle to dissipate heat, and the heat breakage to insulate, and releases the nozzle blockage.
- Notice: This integrated hotend kit replacement is compatible with Prusa I3 MK4 MK4S MK3.9 MK3.9S XL Core One FDM 3D printer.
- Filament material: The print head for Prusa I3 MK4/XL works with 1.75 mm PLA/ABS/PETG/TPU/Wood filament.
8.9Very Good
View offer on:
Show more
7
HzdaDeve14% OffHzdaDeve 3 Pack Hardened 200K Hotend for Kobra S1 Combo 0.2MM 0.4MM 0.6MM Stainless Steel Print Head Extruder Kit Hot End Heater Block Heating Rod Thermistor Nozzle for Anycubic Kobra S1/ACE Pro
Main highlights- Simple Installation: Remove the old hot end and install the new hotend to start. (Heating tube, thermistor, nozzle etc are pre-installed)
- Package Included: 1 set 0.2MM hotend kit + 1 set 0.4MM hotend kit + 1 set 0.6MM hotend kit (heater cartridge, thermistor, heat block,throat tube, nozzle, silicone cover)
- Nozzle and hot block: The seamless connection between the nozzle and heat breakage accelerates the nozzle to dissipate heat, and the heat breakage to insulate, and releases the nozzle blockage.
- Notice: This is upgraded 200K thermistor which has no temp issue.
- Filament material: The print head for Anycubic Kobra S1 works with 1.75 mm PLA/ABS/PETG/TPU/Wood filament.
- Compatible Printer: This hotend kit replacement is compatible with Anycubic Kobra S1/Combo/ACE Pro FDM 3D printer.
8.7Very Good
View offer on:
Show more
8
CrealityCreality Official Sprite Extruder Upgrade Heater Block Kit High Temperature Pro 300℃ Titanium Heatbreak Plated Copper Nozzle Compatible with Creality Ender 3 S1/Ender3 S1 Pro/CR10 Smart Pro
Why we love it
The package includes different types of metal for the best printing quality
The nozzle is smooth and stable for different types of materials
The heater block can reach high temperatures for better printing
8.6Very Good
View offer on:
Show more
9
POLISIHeater Block Nozzle kit Compatible with Ultimaker 2 + UM2 Extended 3D Printer Olsson Block Hotend, Interchangeable Nozzle, 3.0mm
Main highlights- including 4 pieces nozzles: 1pcs 0.25mm + 1pcs 0.4mm + 1pcs 0.6mm + 1pcs 0.8mm
- can change the nozzle size easily.
- This Heater block nozzles kit is improved Compatible with Ultimaker 2 that the nozzle and heat block are two seperate pieces
8.4Good
View offer on:
Show more
10
LANKEGUCreality 300℃ High Temperature Heat Block Kit for Ender-3S1, 3D Printer Heating Block Titanium Alloy Throat Tube 3 Silicone Socks and 5 PCS Nozzle Kit for Ender 3 S1/S1 Pro/Plus, CR-10 Smart Pro
Main highlights- Titanium Alloy Throat Tube(TC4): Thermal conductivity is 8.7w/(m·K) half of the stainless steel material effectively block heat dissipation.
- Package includes: 1x Heating Block Kit-High Temperature (300℃) + 5x 0.4mm nozzles + 3 silicone socks.
- Heating Block Kit-High Temperature (300℃): High temperature printing under 300℃, titanium alloy material can reduce the heat conduction upward.
- Compatible Models: This Heating Block Kit-High Temperature (300℃) kit is compatible with Ender-3S1, Ender-3S1 Pro, Ender 3 S1 Plus, CR-10 Smart Pro, Sermoon V1, Sermoon V1 Pro.
- 5PCS Nozzle and 3 Silicon Socks: Equipped with 5 pieces 0.4mm brass nozzles and 3 additional high temperature resistant silicone socks, which are convenient for daily maintenance and durable.
8.1Good
View offer on:
Show more
Similar products on Amazon
