10 Best Hackrf Software In The Us - Black Friday 2024
NooElec HackRF Complete Bundle - Genuine HackRF One Software Defined Radio (SDR) with 0.5PPM TCXO in a Custom Black Aluminum Enclosure. ANT500, USB Cable & SMA Adapter Bundle Included
Main highlights- Your bundle includes a genuine HackRF One, installed an inconspicuous black aluminum enclosure with a 0.5PPM TCXO module, an ANT500 antenna, 4 SMA antenna adapters and a USB cable for powering the HackRF
- The included adapters will allow you to connect a wide range of antennas to your HackRF One, including F-connector, N-connector, BNC and PAL antennas
- Installation support and assistance available directly from Nooelec
- HackRF One is capable of half-duplex operation in the range of 1MHz to 6000MHz. The TCXO module ensures impeccable tuning accuracy in nearly any environment
- HackRF One is an open-hardware device which is compatible with a wide range of SDR software applications, most of which are free to download and open source
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
NooElecNooelec HackRF One Software Defined Radio, ANT500 & SMA Adapter Bundle for HF, VHF & UHF. Includes SDR with 1MHz-6GHz Frequency Range & 20MHz Bandwidth, ANT-500, and 4 SMA Adapters
9.9 worth the money9.7 materials Quality9.3 Simple to useWhy we love it
Comprehensive bundle with essential accessories included.
Wide frequency range and high bandwidth capabilities.
Compatible with many SDR software applications.
9.7Exceptional
View offer on:
Show more
3
NooElecNooelec HackRF One Software Defined Radio (SDR) & ANT500 Antenna Set. Capable of Receiving All Modes in HF, VHF & UHF Bands. Includes SDR with 1MHz-6GHz Frequency Range & 20MHz Bandwidth and ANT-500
Main highlights- Your bundle includes a HackRF One, an ANT500 antenna, and a USB cable for powering the HackRF
- Installation support and assistance available directly from Nooelec
- HackRF One is compatible with a wide range of SDR software applications
- HackRF One is capable of half-duplex operation in the range of 1MHz to 6GHz with an instantaneous bandwidth capability of 20MHz
- Full operating instructions and demo software are available on the HackRF One project wiki
9.6Exceptional
View offer on:
Show more
4
GenericGreat Scott Gadgets’ Opera Cake – Antenna Switching Add-On Board for HackRF One and Other Software Defined Radios
Main highlights- Please note that this product is not physically compatible with the plastic enclosure sold with the HackRF, nor with the aluminum enclosure we sell for the HackRF
- Opera Cake is an antenna switching add-on board designed to sit directly on top of the HackRF One
- Opera Cake has a recommended frequency range of 1MHz - 4GHz
- Opera Cake documentation: https://hackrf.readthedocs.io/en/latest/opera_cake.html
- It is optimized for use as a single 1x8 switch, or as a pair of 1x4 switches. It can be configured via command-line software either manually or through automation (either frequency or time)
9.5Excellent
View offer on:
Show more
5
WnewToolsNew PortaPack H2 And Hack R F One SDR Software Defined Radio 1MHz-6GHz Assembled with Antennas Built-in Rechargeable Battery
Main highlights- Package Included:
- -Your Hack R F will continue to work with the computer-based SDR software when you put the PortaPack in "Hack R F mode".
- -PortaPack is only compatible with the Hack R F Unio. It is not compatible with the first Hack R F Jawbreake design. If you have an RF shield installed on your Hack R F, the PortaPack should be fine.
- -PortaPack and Hack R F of Un will not replace your handheld ham radio receiver. Reception sensitivity varies from band to band, but will not perform as well as a real ham radio receive
- -Built-in rechargeable lithium battery
9.4Excellent
View offer on:
Show more
6
NooElecRaTLSnake M6 v2 - Premium 3-Antenna Bundle for NESDR, RTL-SDR, HackRF, and Other Software Defined Radios. Magnetic Whip Antenna Set Made with Low-Loss RG58 Cable for Radios with 50 Ohm SMA Connectors
Main highlights- Redesigned for 50Ω to maximize compatibility with commonly used radios and to reduce SWR mismatches. The base has been redesigned to improve ground plane coupling and shielding over v1.
- Male SMA connector on antenna cable for easy connectivity to all 50Ω SMA-input radios like our NESDR SMArt series and HackRF One
- Includes antenna base and 3 antenna masts--helical, DVB-T2 and telescopic--for wideband reception. Specially designed for wideband software defined radios
- Heavy-duty, wide-band premium antenna bundle for RTL-SDR and other SMA radios. Long 2m (6') cable made with low-loss RG-58
- Antenna base is constructed from heavy-gauge metal for resilience and longevity. Includes full 1 year support and service direct from Nooelec!
9.3Excellent
View offer on:
Show more
7
NooElecNooelec Lana - Ultra Low-Noise Amplifier (LNA) Module for RF & Software Defined Radio (SDR) with Enclosure & Accessories. Wideband 20MHz-4000MHz Frequency Capability with Bias Tee & USB Power Options
Main highlights- NOTE: Some SDRs will require a DC block between the LNA and SDR if utilizing the external power options.
- Made in North America. 2 year service and support! For more information review the product page or datasheet: https://www.nooelec.com/datasheets/100812
- Improve the SNR and performance of your RTL-SDR, SDR or other radio! LaNA is a wideband (20MHz - 4GHz), high-performance, general purpose LNA module with an extremely low noise figure, installed in a quality aluminum enclosure
- Higher gain, lower noise figure, lower power consumption and better linearity than modules based on SPF5189Z and similar LNA MMICs
- Can be powered through bias tee (3.3V-5V), USB, or DC power with the included adapter. A free male SMA to male SMA connector is also included
9.2Excellent
View offer on:
Show more
8
DiydegDiydeg SDR Radio Receiver, 1MHz‑6GHz Full Featured Software Radio Receiver with 3.5mm Audio Jack & PPM Calibration, Aluminum Alloy SDR Receiver Kit Built in 2000mAh Battery for PortaPack H2(Black)
Main highlights- 【ONE KEY TALK】This smart audio receiver is equipped with 3.5mm audio jack for Portapack, which makes it can also be used as a standard configuration. Voice walkie talkie radio one key talk.
- 【FREQUENCY RANGE】This software defined radio receiver with 1MHz‑6GHz frequency range.There is a micro memory card slot for data and code storage, very practical and convenient.
- 【EASY TO USE】This SDR radio receiver kit contains 3pcs antennas and 1pc USB cable, easy to connect and install. Press the black knob once to turn on and press the black knob twice to shut down.
- 【ACCURATE TUNING】This USB SDR radio transceiver adopts PPM calibratio, which enables more accurate tuning and stable performance, very easy to use, you can use with confidence.
- 【 QUALITY ASSURANCE】We are very confident in the quality of this software transceiver, and provide or refund for it. Please feel to reach us if you have any questions about your purchase.
9.0Excellent
View offer on:
Show more
9
DmgicProPortapack H2 Radio Transceiver,Metal Shell 1MHz-6GHz Full Band Radio with 3.2 Inch TFT Screen,2000mAh Long-Life & SD Card Slot(Not Incloud SD Card),Wireless Transceiver NFM WFM Audio
Main highlights- Voice Activated Walkie Talkie Radio: Using a 3.5mm audio jack, the transmitter can also be used as a standard push to talk or voice activated walkie talkie radio.
- Press the Call: Plug the microphone into the audio jack, just press and hold the button on the right, the sender can press the call.
- NFM WFM Audio Signals: You can easily listen to standard NFM and WFM audio signals by connecting the speaker to the 3.5mm audio jack of the transmitter.
- Capture Wireless Signal: This transmitter can easily capture and replay the wireless signal remote control.
- Basic Specifications: This is a full featured radio transceiver, is capable of half-duplex operation in the range of 1MHz to 6GHz,for SDR Radio etc software, with a 3.2in TFT 240 x 320 screen, usb powered.
8.9Very Good
View offer on:
Show more
10
BusoThFull Function SDR Radio Receiver, H2 Control Board, SDR Radio Transmitter Mainboard, 1MHz‑6GHz Frequency Range, 3.2 Inch LCD, Aluminum Case with Portable Design
Main highlights- SOUND : You can easily listen to standard NFM and WFM sound by connecting the speaker to the transmitter's 3.5mm sound jack. Using for IOS or for Android headset MIC can send voice and headset can listen to sound with sound input and output function (ADC, DAC)
- PRACTICAL TO USE: for PortaPack firmware provides a user interface and the necessary processing to do many useful things without a computer.
- PORTABLE DESIGN: for PortaPack H2 makes software defined radio portable with three additional antennas and an SMA cable.
- MULTIFUNCTIONALITY: Adds user interface navigation controls, sound outputs and inputs, memory card slot, 0.5 PPM crystal oscillator, real time clock battery backup, speaker, lithium battery charger, and center power on and off function (two clicks) ).
- ALUMINUM CASE, 3.2 INCH TOUCH LCD SCREEN: Premium aluminum case, can be well protected for portapack. 3.2 inch touch LCD screen.
8.6Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for hackrf software
