10 Best Gps Receiver Trimble In The Us - Black Friday 2024
E1 RTK GNSS Survey Equipment 20 Hours Endurance RTK GNSS GPS with IMU Rover & Base Handheld Collector with Survey Software RTK Surveying Equipment,1408 Channels, 5km UHF Range,60° Tilt Survey
Main highlights- 【Various Interfaces】E1 Innovative integration of multiple connection methods: NFC (Touch connection) /Bluetooth/USB Type-C/WiFi/TNC Connector/RS232 Serial Port. Easily access static data download, Configuration, device Status check, and Firmware Upgrade.Improve your work efficiency by 30%!!
- 【Support】Buyers can always contact the seller's tech team to ensure the equipment works perfectly. Please refer to the manual included in the package, email us for technical support, or visit the SingularXYZ website to get in touch. We also offer video conference guidance to assist you.
- 【Robust Signal Tracking】E1 RTK GNSS GPS support Full-Constellation Tracking: GPS/GLONASS/Galileo/BDS/QZSS/IRNSS/SBAS etc, an easily obtain fixed RTK solution in seconds even in challenging environments like multipath, trees, and city canyons.
- 【ABOUT US】SingularXYZ focuses on high precision GNSS PNT (Positioning, Navigation & Timing) technology, extending its coverage to geospatial information, precision agriculture, machine control, robotics, telecom, IoT and etc., providing reliable, stable and professional products and service, committed to popularizing precision and intelligence into all aspects of people's lives, contributing to the construction of an informatized, intelligent and efficient world.
- 【60°Tilt Surveying】E1 GNSS Surveying System with IMU, can initializes in 5 seconds and supports tilt measurements up to 60°, and compatible with regular 5/8" thread poles.
- 【5 Kilometers】E1 RTK GNSS Surveying System with IMU has a long transmission distance, Radio range between the rover and the base can reach 5 kilometers (3.1miles). Also E1 can compatible with base stations of other brands in both Radio and CORS mode. Support RTCM v3/CMR correction data transmission.
- 【20 Hours Endurance 】E1 RTK GNSS provides 6700mah over 20 hours of continuous operation on a single charge, with fast Type-C charging. It employs a base station and rover with the (GPS) to attain Centimeter-Level Precision Measurement, High precision with low power consumption, small size easy to carry and operate.
- 【1-On-1 Support Service】Enjoy a one-year warranty and lifetime technical support for a hassle-free experience. Complete user manual and video tutorials to help you get started at ease. Both field Surveying Software SingularPad and Post-processing Software are included. Software installed in Collector are Permanently Valid, We provide permanent free software upgrade and update services.
- Curious about how we select the top products for you? Explore How It Works
SingularXYZ E1 GNSS GPS RTK Base Station Land Surveying Equipment Total Station GNSS Receiver High Accuracy Static Surveying, Coodinates Collection, Point Surveying
Main highlights- 【Software Included】SingularPad software is included on a USB drive for easy installation on Android devices.
- 【Rover Mode】To activate rover mode, a permanent license for SingularPad software is required. Please contact SingularXYZ for details.
- 【Long Battery Life】E1 offers up to 20 hours of continuous operation on a single charge and supports fast charging via Type-C port.
- 【Fixed in Seconds】E1 provides rapid and stable positioning, even in challenging environments such as multipath, tree canopy, and urban canyons.
- 【Compact and Lightweight】E1's compact design (Φ133.5 mm × 67 mm) and lightweight build (870g) make it easy to carry without sacrificing performance.
- 【Base Station Mode】E1 supports base station configuration through the SingularPad software without any additional license requirements.
- 【ABOUT US】SingularXYZ focuses on high precision GNSS PNT (Positioning, Navigation & Timing) technology, extending its coverage to geospatial information, precision agriculture, machine control, robotics, telecom, IoT and etc., providing reliable, stable and professional products and service, committed to popularizing precision and intelligence into all aspects of people's lives, contributing to the construction of an informatized, intelligent and efficient world.
- 【60° Tilt Measurement】With an advanced IMU module, E1 allows tilt measurements up to 60° with ±2.5cm accuracy.
High Accuracy GPS Receiver Antenna with Low Noise Amplifier, IP68 Grade, for Agriculture, Deformation, Navigation and Locating
Main highlights- [Wide Application] Ideal for Beidou 2, GPS, GLONASS navigation, this antenna is widely used in geodesy, agriculture, oceanography, and more for precise navigation and locating.
- [Small Measuring Error] In GPS measurement, this antenna adopts single-layer multi-feed ultra wideband design, minimizing phase center difference for precise results.
- [Low Noise Amplifier] Featuring a pre-filtering technology that suppresses out-of-band interference , this antenna improves reliability and accuracy.
- [Ip68Grade] Waterproof and dustproof with high compressive strength, the UV-resistant cover ensures long-term outdoor use for high accuracy measurement.
- [Good Reception Effect] With high gain and excellent reception on low satellites, this antenna ensures normalcollection even in obstructed areas.
SZRMCC Trimble GPS RTK GNSS Receiver 5700 5800 R6 R7 R8 R10 46125-20 Replacement Power Cable Alligator Clips to 0B 7 Pin…
Main highlights- Use the Alligator Clips to connect an 12V extended battery to power the Trimble GPS 5700, 5800, R6, R7, R8, SPS, 4700, 4800, RTK, such as a car battery....
- Trimble 46125-20 replacement. Will work with following Geodimeter Total Station systems: Trimble GPS 5700, 5800, R6, R7, R8, SPS, 4700, 4800, RTK. Trimble R10 GNSS Receiver
- Plug A: Alligator Clips Connector; Plug B: 0B 7 pin Male Connector + 15A fuse.
- Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.
- Cable Length : 70.8Inches/1.8m (We can customize with other length, please contact us if you need).
Artisan Power Replacement Battery for Trimble GPS Receiver Systems | 2600 mAh | Li-ion Rechargeable Battery Pack | Made in Japan Cells by Panasonic | Replace Trimble Battery 54344, 92600, and 52030
Main highlights- MANUFACTURED BY ARTISAN POWER: When it comes to reliable accessories, Artisan Power stands out. As a leader in replacement products, they prioritize user satisfaction and product excellence. There products reflects their commitment to quality, ensuring that you get the best.
- HIGH CAPACITY: With a powerful 2600 mAh capacity, our replacement battery offers extended operational time, ensuring that your trimble GPS receiver remain powered throughout your workday. This high-capacity battery is particularly beneficial for long surveying sessions or extended fieldwork.
- EASY INSTALLATION: Our replacement battery is designed for user-friendly installation, allowing you to quickly and easily replace your old battery without the need for specialized tools or technical expertise. This convenience is particularly valuable for professionals.
- DURABILITY AND RELIABILITY: Our replacement battery is manufactured from high-quality materials that ensure durability and longevity. Our battery’s reliable performance ensures that your Trimble GPS Receiver Systems operate at their best, providing accurate and dependable data collection.
- COMPATIBILITY: Our replacement battery is designed to be the perfect power solution for a wide range of Trimble GPS Receiver Systems, including R8, R7, R6, R-8, 5700, 5800, 29518, and MT1000. This battery ensures that you can seamlessly switch between different devices.
HangTon 12V Power Cable for Trimble R7 R8 R9 R10 R12 5700 5800 SPS985 GPS RTK GNSS Receiver, 7 Pin to Clips
Main highlights- Safe power cable with fuse
- Fit for all Trimble 7-pin instrument, such as SPS985 SPS851 and RTK
- External power cable for Trimble R9 R8 4800 R6 4600 R7 4700 GPS Receivers and Trimble R10 R12 GNSS receiver
- Connectors: 0B 7-pin connector to alligator clips
- Cable: 46125-20. Length: about 1.8 meters /6ft
JIEYUEXIN Power Cable for Trimble 4700 4800 5700 5800 R6 R7 R8 R10,7 Pin to Alligator Clips GPS Power Cable for Trimble GPS RTK GNSS Receiver(46125-20)
Main highlights- Work with all Trimble 7-pin instrument (Trimble R6,R7,R8,5700,5800,4700,4800,SPS etc);
- Model: Replacement 46125-20; Length:1.8M;Weight: 210g;
- If you have any question, please contact us,we will answer you as soon as possible!
- Equipped with 7-pin (0B) size and Fuse Protected and heavy duty alligator clips
- Connect your device to 12V battery to get power;Used with the highest quality components;With Precision 10amps fuse;
- Before we send it out, Unit fully tested functional.
Bingfu RTK Radio Antenna 400MHz-470MHz RTK UHF Radio Antenna Soft Whip TNC Male Antenna Aerial for RTK Survey GPS Receiver GNSS System Trimble Leica Sokkia RTK Surveying Instrument
Main highlights- UHF Radio Frequency Range: 400-470 MHz;
- Package List: 1 x Antenna (As the Picture Shown);
- Gain: 5dBi; Direction: Omni-directional;
- Connector: TNC Male Connector; Feature: Short Soft Whip Antenna;
- Application: Trimble Leica Sokkia RTK Surveying Instruments RTK Survey GNSS GPS Receiver Network Antenna;
Dual Charger for Trimble 5700/5800/R8/R7 GPS 54344 TSC1 GPS Receiver Battery
Main highlights- Output Volage:DC12V 2A
- For Trimble 5700/5800/R8/R7/R6 GNSS GPS TSC1 GPS Receiver
- Every porduct was tested to ensure that there are no short circuit, no potential breakdown problems before shipping.Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.
- Charger plugs :US,EU please leave message after you purchase
- AC Input Voltage:100V---240V/50/60Hz
Black Friday Sale
Deal ends in
HrsMinSec