10 Best Gps Receiver Pps In The Us - Black Friday 2024
Best Choice1
RCmallRCmall forM8N USB GPS Module 56 Channels Supports GPS GLONASS Beidou GPS Receiver with 28dB GPS Active Antenna (GPS Module with Antenna)
Main highlights- Supports Multiple Modes -- GPS+GLONASS (default) ; GPS+Beidou ; GLONASS+ BeiDou .
- Package List : 1 X forM8N USB GPS Module ; 1 X Dual-Band Active GPS Antenna .
- GPS + Beidou Dual-Band Waterproof Active GPS Antenna . GPS frequency: 1575.42±5MHz ; Beidou frequency: 1561.098±5MHz .
- Comes with high sensitivity ceramic antenna. The side of ceramic antenna need face to the sky .
- Built-in TCXO Crystal and Farad Capacitors for Faster Hot Start .
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
BeitianBeitian GPS Module with Antenna UAV Drone M10050 M8030 M9140 chip Ultra-Low Power GNSS Receiver for Track BE-280 BK-280 BN-280 BS-280
Main highlights- Package:1.25mm 6pins connector
- PPS LED: red. PPS LED not bright when GPS not fixed, flashing when fixed
- NMEA messages:RMC,VTG,GGA,GSA,GSV,GLL
- GPS module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy 880 from Beitian.
- Beitian GPS MODULE BE-280 BK-280 BN-280 28*28*8.4mm
9.6Exceptional
View offer on:
Show more
3
Beffkkip2Pack GPS Module,Navigation Satellite Positioning NEO-6M,Arduino GPS, Drone Microcontroller, GPS Receiver Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity
Main highlights- With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned;
- USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna;
- USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna
- If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer.
- GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage;
9.5Excellent
View offer on:
Show more
4
GeekstoryVK-162 G-Mouse USB GPS Dongle Navigation Module External GPS Antenna Remote Mount USB GPS Receiver for Raspberry Pi Support Google Earth Window Linux Geekstory
Main highlights- VK-162 GPS support windows and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work.
- This usb gps can be used for mac computer, but it requires very professional technical skills.
- The cable length is 190cm. The USB GPS is a great, easy, and an awesome solution for travelers.It works anywhere around the world. After you download the maps for the country traveling, it will pin point exactly where you are without having to pay any service.
- It is a magntized antenna,if get the GPS signal,please use the GPS module outdoor,If you want to use the GPS module indoor,please install GPS signal amplifier in your room
- Documentation you can find at the bottom of the details page - Product guides and documents: (User Manual (PDF), which contains details on how to use and links to the drivers.
9.3Excellent
View offer on:
Show more
5
BeitianBeitian GPS Module with Antenna UAV Drone M10050 M9140 chip Ultra-Low Power GNSS Receiver for Track GPS 250series (BE-250Q)
Main highlights- The red light, the PPS light, does not light up if it is not positioned; after 3D positioning, it starts to flash
- The blue light, the TX light, and the blue light flashes when power on, indicating that there is data output.
- Configurable from 0.25 Hz to 10 MHz, the default period is 1s, and the high level lasts for 100ms
- Beitian GPS MODULE 8th 9th 10th UBLOX CHIP M8030 M9140 M10050
9.2Excellent
View offer on:
Show more
6
GeekstoryGeekstory VK-162 G-Mouse USB GPS Dongle M8030 Chip 72 Channel Navigation Module External GPS Antenna Remote Mount USB GPS Receiver with Flash for Raspberry Pi Support Google Earth Window Linux
Main highlights- VK-162 GPS support windows and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work
- The cable length is 200cm. Support GPS + GLONASS(default), GPS + beidou, GLONASS + beidou. VK-162 usb gps has flash to save setting. Your settings will be saved the next time you use it, which will make it easier to use
- The USB GPS is a great, easy, and an awesome solution for travelers.It works anywhere around the world. After you download the maps for the country traveling, it will pin point exactly where you are without having to pay any service
- It is a magntized antenna,if get the GPS signal,please use the GPS module outdoor,If you want to use the GPS module indoor,please install GPS signal amplifier in your room
- If you have any issue when using our product,or you need product use documentation, please click “Geekstory” to em-ail us
9.1Excellent
View offer on:
Show more
7
GeekstoryGeekstory DY-220 GPS Receiver Module Dual GPS Glonass Module Navigation TTL Level 9600bps with Active Antenna Build-in Flash for Arduino FPV Aircraft, Replace BN-220 GPS
Main highlights- What you will get: 1 X DY-220TTL GPS Module, 3 X 4P 1.0mm Pitch Cable
- This DY-220TTL GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd
- The PW LED flash means gps module output normally. The PPS LED flash means gps module locate your place. Note: without PPS output, only PPS indicator
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps
- DY-220TTL gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy other from Geekstory
8.9Very Good
View offer on:
Show more
8
NarooteVK-162 G-Mouse USB GPS Dongle Navigation Module, Naroote External GPS Antenna Remote Mount USB GPS Receiver - Accurate and Fast Navigation Module for Raspberry Pi
Main highlights- 【High Sensitivity】Experience fast and accurate position data with the high sensitivity of this navigation module. With a positioning update rate of 1-5Hz, it utilizes a hybrid engine that supports GPS, GALILEO, and SBAS (WAAS, EGNOS, MSAS, GAGAN) systems.
- 【Fast Startup】Equipped with a built-in RTC crystal and picofarad capacitor, this USB GPS receiver ensures a quick hot start. You can start navigating in no time, saving you valuable time and effort.
- 【Configurable Parameters】The USB GPS dongle navigation module features a built-in EEPROM, allowing for easy configuration of parameters. Its USB interface makes installation a breeze, compatible with Raspberry Pi, Windows, Linux, and more.
- 【Accurate Data Tracking】The VK-162 USB GPS dongle navigation module provides reliable and accurate GPS tracking for any device. With its KDS0.5PPM high precision TCXO, you can trust the accuracy of your location data.
- 【A-GPS Support】This module supports A-GPS services such as AssistNow Online and AssistNow Offline. It is compatible with various navigation modules, notebooks, and laptops, enhancing versatility in navigation applications.
8.7Very Good
View offer on:
Show more
9
DEEGOO-FPV2pcs GT-U7 GPS Module Navigation Satellite Positioning NEO-6M Arduino GPS Receiver Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity Suitable for Vehicles
Main highlights- With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned
- Note: Please use the GT-U7 GPS module in an open place, the LED will flash after the satellite signal is found. Bad weather and indoor use will affect the accuracy of positioning
- GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage
- GPS module compatible with NEO-6M 51 MCU STM32, working voltage: 3.6V-5V (or use Micro USB to directly supply power)
- GPS baud needs to be set to 9600 instead of 4800; PPS pin is not needed unless using the GPS to drive a hardware high precision clock; GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M
8.6Very Good
View offer on:
Show more
10
DIYmallsDIYmalls BE-220 GPS Receiver Module TTL 10th Chip 38400bps for Arduino FPV Aircraft CC3D Flight Control, Replace BN-220 GPS
Main highlights- -be220 GPS equiped with 10th chip to replace the bn220 gps, more accurate and receiving signal faster.
- -be-220 gps should be used outdoor, and the antenna side facing to the sky.
- -be 220 module connection with flight control, usb to ttl and develop board: gnd to gnd, tx to rx, rx to tx, vcc to 5v.
- -The blue (TX) light flashes when power on, indicating there is data output.
- -Baud Rate: 4800bps to 921600bps, default 38400bps( Remember it is NOT 9600bps).
8.5Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for gps receiver pps
