Gps Gsm Module Manufacturers of 2025
Best Choice1
XYGStudyfor Raspberry Pi GSM/GPRS/GNSS Bluetooth HAT Module SMS GPS UART Based on SIM868 for Raspberry Pi 4B/3B/3B+/2B/Zero/Zero W Support Phone Call Speaker Global Position Transfer Data @XYGStudy
Main highlights- This is a handy, low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, GNSS and Bluetooth. It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, global position, transfer data via Bluetooth, and so on.
- Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc. Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning. Bluetooth 3.0, supports data transferring through Bluetooth. Onboard USB TO UART converter CP2102 for UART debugging
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- Part Number: GSM/GPRS/GNSS HAT
- GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi, Based on SIM868
9.9Exceptional
View offer on:
Show more
How do we rank?
Using our advanced technology, we scan thousands of products and stores, analyzing reviews, ratings, and trends to find what matters most to users like you.Our team then reviews the data and real user feedback, combining AI and human insights to bring you real-time, top-rated recommendations to guide your decisions with clarity and confidence.
Value for Money2
Deegoo-FPVDeegoo-FPV GPS Compass Module+ NEO-M8N+ GPS BDS Module Precision APM Drone Control, GPS Receiver FPV Flight Control Pixhawk Navigation Module for APM PIX PX4, Compatible with APM Port I2C MWC
Main highlights- Wide range of use: for APM flight control, PIX flight control, PX4 flight control; The outlet terminal is directly compatible with the APM serial port and I2C port. Plug and play other flight controllers are also available, such as MWC flight controller.
- Three in one Function: Support GPS BDS dual-mode positioning, plus compass chip! Let you realize the desire of one module can be used in many ways!
- Positioning; Auto-positioning: 2.5m [in average]; Auxiliary positioning: 2m [average], with SBAS assistance; Drift: <0.02m / s; Timing accuracy: 60ns; Reference coordinate system: WGS-84; Maximum altitude: 50000 meters [Please pay attention to atmospheric; Temperature during high-altitude flight, and please open the flight mode]; Maximum speed: 500m / s; Acceleration: <4g.
- Main chip: U-B-LOX M8030 KT， Built-in TCXO, which maintain good consistency in the temperature of -40 ℃ ~ +85 ℃; Tracking channels: 72 Three in one Function: Support GPS BDS dual-mode positioning, plus compass chip! Let you realize the desire of one module can be used in many ways!
9.8Exceptional
View offer on:
Show more
3
GenericSIM808 Module GSM GPRS GPS Development Board IPX SMA with GPS Antenna for Arduino Support 2G 3G 4G SIM Card
Main highlights- SIM808 Module GSM GPRS GPS Development Board IPX SMA with GPS Antenna For Arduino Support 2G 3G 4G SIM Card
9.7Exceptional
View offer on:
Show more
4
Beffkkip2Pack GPS Module,Navigation Satellite Positioning NEO-6M,Arduino GPS, Drone Microcontroller, GPS Receiver Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity
Main highlights- With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned;
- USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna;
- USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna
- If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer.
- GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage;
9.6Exceptional
View offer on:
Show more
5
HGLRCHGLRC M100-5883 GPS Compass Module, Upgraded 10th Generation Chip Compatible with FPV Fixed-Wing UAV
Main highlights- With QMC 5883 compass: Quickly identify the directionAccurate positioning
- Stable signal: Carefully modulated ceramic antennaand external expansion PCB. Can effectively receive satellite signals
- Small and exquisite: 21mm x21mm size, Only 7.73g weight
- Quickly completesatellite search: Support GPS, Galileo, BDS three-mode positioning, fast positioning in any area
- New upgraded 10th generation chip: With compass Suitable for FPV fixed-wing UAV
9.4Excellent
View offer on:
Show more
6
MakerFocusMakerFocus 2 Pack GT-U7 GPS Module Satellite Navigation Positioning GPS Receiver Drone Microcontroller Compatible with NEO-6M 51 Microcontroller STM32 Arduino UNO R3 with IPEX Antenna High Sensitivity
Main highlights- With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned
- USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna
- Note: Please use the GT-U7 GPS module in an open place, the LED will flash after the satellite signal is found. Bad weather and indoor use will affect the accuracy of positioning
- GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage
- GPS baud needs to be set to 9600 instead of 4800; PPS pin is not needed unless using the GPS to drive a hardware high precision clock
9.3Excellent
View offer on:
Show more
7
Teyleten RobotTeyleten Robot ATGM336H GPS+BDS Dual-Mode Module Flight Control Satellite Positioning Navigator Replacement NEO-M8N NEO-6M for Arduino 2pcs
Main highlights- Wearable device
- Mobile phones, tablet PCs, handheld devices
- Embedded positioning device
- Car positioning in navigation
9.2Excellent
View offer on:
Show more
8
GeekstoryGeekstory BE-880Q GPS Module with Flash QMC5883L Compass GPS Antenna TTL Level 38400bps for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller
Main highlights- When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to GND, green to TXD white to RXD. The blue (TX) light flashes when power on, indicating there is data output
- This BE-880Q GPS Module using the latest 10th generation chip. BE-880 gps module is dual module compass, with and electronic compass IC QMC5883L
- DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- Baud Rate : 4800bps to 921600bps, Default 38400bps. You can set the baud rate you need in this range according to your needs
- BE 880Q gps module has flash to save configuration. So you do not need to reset next time when you use it
9.0Excellent
View offer on:
Show more
9
GeekstoryGeekstory DY-180TTL GPS Receiver Module Dual Glonass GPS Navigation Module TTL Level 9600bps with GPS Antenna for Arduino FPV Aircraft,Replace BN-180 GPS
Main highlights- What you will get: 1 X DY-180TTL GPS Module, 3 X 4P 1.0mm Pitch Cable
- This DY-180TTL GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps
- This DY-180 TTL GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd
- The PW LED flash means gps module output normally. The PPS LED flash means gps module locate your place. Note: without PPS output, only PPS indicator
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
8.8Very Good
View offer on:
Show more
10
YELUFTYELUFT 2 Pack Pre-Soldered ATGM336H GPS Module GPS & BDS Dual Mode Satellite Positioning Navigator with Antenna Replacement NEO-M8N for Meshtastic GPS Arduino
Main highlights- Widely Application: ATGM336H-5N GPS module has the advantages of high sensitivity, low power consumption, low cost, etc. It is suitable for vehicle navigation and positioning, handheld positioning, wearable devices, embedded positioning devices
- Supports A-GNSS Function: A-GNSS can provide the receiver with the necessary auxiliary information for positioning, such as telegrams, rough position and time. Whether in strong or weak signal environments, this information can significantly shorten the first positioning time
- Outstanding Performance: Based on AT6558, including 32 tracking channels, ATGM336H GPS module supports A-GNSS and can receive GNSS signals from six satellite navigation systems at the same time, realize joint positioning, navigation and timing
- Note: When using GPS module, try to take the computer to outdoors. If you use it indoors, affected by the distance between the buildings, obstructions and other factors, there is a certain chance of positioning failure. The first time positioning outdoors is usually within one minute, onboard LED keeps flashing at a certain frequency means successful positioning
- Accurate Positioning: Positioning accuracy is 2.5 meters(CEP50, open place), first-time positioning time is only 32 seconds, excellent positioning and navigation function, supports single-system positioning of BDS/GPS navigation systems, as well as multi-system joint positioning in any combination
8.7Very Good
View offer on:
Show more
Similar products on Amazon
