10 Best Gps Gnss L1 L2 Receiver In The Us - Black Friday 2024
E1 RTK GNSS Survey Equipment 20 Hours Endurance RTK GNSS GPS with IMU Rover & Base Handheld Collector with Survey Software RTK Surveying Equipment,1408 Channels, 5km UHF Range,60° Tilt Survey
Main highlights- 【Various Interfaces】E1 Innovative integration of multiple connection methods: NFC (Touch connection) /Bluetooth/USB Type-C/WiFi/TNC Connector/RS232 Serial Port. Easily access static data download, Configuration, device Status check, and Firmware Upgrade.Improve your work efficiency by 30%!!
- 【Support】Buyers can always contact the seller's tech team to ensure the equipment works perfectly. Please refer to the manual included in the package, email us for technical support, or visit the SingularXYZ website to get in touch. We also offer video conference guidance to assist you.
- 【Robust Signal Tracking】E1 RTK GNSS GPS support Full-Constellation Tracking: GPS/GLONASS/Galileo/BDS/QZSS/IRNSS/SBAS etc, an easily obtain fixed RTK solution in seconds even in challenging environments like multipath, trees, and city canyons.
- 【ABOUT US】SingularXYZ focuses on high precision GNSS PNT (Positioning, Navigation & Timing) technology, extending its coverage to geospatial information, precision agriculture, machine control, robotics, telecom, IoT and etc., providing reliable, stable and professional products and service, committed to popularizing precision and intelligence into all aspects of people's lives, contributing to the construction of an informatized, intelligent and efficient world.
- 【60°Tilt Surveying】E1 GNSS Surveying System with IMU, can initializes in 5 seconds and supports tilt measurements up to 60°, and compatible with regular 5/8" thread poles.
- 【5 Kilometers】E1 RTK GNSS Surveying System with IMU has a long transmission distance, Radio range between the rover and the base can reach 5 kilometers (3.1miles). Also E1 can compatible with base stations of other brands in both Radio and CORS mode. Support RTCM v3/CMR correction data transmission.
- 【20 Hours Endurance 】E1 RTK GNSS provides 6700mah over 20 hours of continuous operation on a single charge, with fast Type-C charging. It employs a base station and rover with the (GPS) to attain Centimeter-Level Precision Measurement, High precision with low power consumption, small size easy to carry and operate.
- 【1-On-1 Support Service】Enjoy a one-year warranty and lifetime technical support for a hassle-free experience. Complete user manual and video tutorials to help you get started at ease. Both field Surveying Software SingularPad and Post-processing Software are included. Software installed in Collector are Permanently Valid, We provide permanent free software upgrade and update services.
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
SMAJAYUSMAJAYU SMA26 GNSS IMU RTK GPS Surveying Equipment Rover Base Handheld Collector and Survey Software, NOAA certificated, 1408 Channels, 1cm Accuracy(Exclude Tripod&Pole)
Main highlights- 【Tech Support】For sure buyer can contact seller tech team for support by email to make sure the equipment 100% works well. Please refer to the PDF e-manual and operation videos as well.
- 【RTK Software】 The RTK surveying software is pre-installed on the handheld collector and is permanently valid. Users can always access a download link to update the software to the latest version
- 【RTK Connection】 Rover+Base:Connect Collector with GNSS receiver by WIFI on WEBUI or BT to set rover and base at the same protocol and frequency till RTK fixed. Or Rover+CORS: login CORS account on software till RTK fixed.
- 【Capability】RTK GPS Land surveying equipment Rover+Base+ Collector(Software permanent valid) ①1cm RTK accuracy and Dual Frequency and Full-Constellation ②5-10km UHF distance between rover and base. ③30°-60° IMU tilt measurement with centimeters accuracy ④2 working days battery life each charge. ⑤10cm accuracy by PPP method, no need base station. ⑥2.5cm accuracy by CORS network station
- 【Application】 The R26 RTK GNSS receiver provides the accuracy needed for a wide range of surveying and engineering applications, including topographic surveying, geographic surveying, engineering surveying, agriculture field measurement, mine surveying, construction surveying ...
- 【Advantages】 ①NOAA: SMA26 antenna is NOAA certificated which adapt for US National spatial reference system and other standard post-processed software. ②Data output format: Differential data: RTCM3.X, Location data: NMEA-0183, Static data: Binary which can be converted to Rinex. ③PPP method: PPP method by Galileo HAS correction, ④PPK is Upgradeable in near future, which can make static during base mode. ⑤CORS network connection supported by login a CORS account on collector.
- ⑥Connection by: BT/WiFi/USB-Type-C/TNC Connector/Serial Port(DB9 cable optional) ⑦Multiple constellation adaptable to any country and suitable for use in various complex and challenging environments: - GPS L1C/A/L2P(Y)/L2C /L5 - GLONASS G1/G2/G3- BDS B1I/B2I/B3I/B1C/B2a/B2b* - GALILEO E1/E5a/E5b /E6* - QZSS L1, L2, L5
9.7Exceptional
View offer on:
Show more
3
SparkFunSparkFun RTK Surveying Kit GNSS Receiver: ZED-F9P Transceiver: ESP32 WROOM GNSS L1/L2 Multi-Band Antenna - TOP106 USB A to C Cable and Wall Charger
Main highlights- Kit includes all the antenna bits, cables and chargers: Jump right into the field
- Kit Includes: 1x -RTK Surveyor; 1x -GNSS L1/L2 Multi-Band Antenna - TOP106; 1x -Antenna Interface Cable - SMA to TNC (300mm); 1x -1/4" to 5/8" Antenna Thread Adapter; 1x -USB Wall Charger - 5V, 2A; 1x -USB A to C Cable - 0.8m; 1x -Data Cable. -1x Radio Cable
- Important: SparkFun RTK Surveyor NOT designed for permanent outdoor mounting; Mount L1/L2 antenna outside; Run SMA cable to RTK Surveyor located inside protected from the elements; See Online Guide: Creating a Permanent Base for more information
- Handy carrying case: Protect most expensive bits: Quickly attach the L1/L2 antenna and RTK Surveyor housing to the pole or tripod of your choice
- Features: Concurrent reception of GPS, GLONASS, Galileo and BeiDou; Receives both L1C/A and L2C bands; Current: 68mA - 130mA (varies with constellations and tracking state); Time to First Fix: 25s (cold), 2s (hot); Max Navigation Rate: PVT (basic location over UBX binary protocol) - 25Hz, RTK - 20Hz; Raw - 25Hz; Horizontal Position Accuracy: 2.5m without RTK; 0.010m with RTK
- Charge from any USB port or adapter: Charge circuit rated 1000mA so USB 2.0 ports will charge at 500mA and USB 3.0+ ports will charge at 1A
9.6Exceptional
View offer on:
Show more
4
DIYmall21% OffDIYmall LoRa+GNSS+Wi-Fi+BT Wireless Tracker Development Kit ESP32-S3 WiFi BT SX1262 LoRa 915MHz UC6580 GPS Receiver for Arduino Meshtastic IoT LoRaWAN
Main highlights- Wireless tracker development kit based on ESP32-S3FN8. It integrates both SX1262 and UC6580 to provide fast GNSS solution for IoT. It can track any object and then upload that data wirelessly by Wi-Fi, Blue-tooth, LoRa
- Wireless Tracker supports L1 + L5/L2, and supports GPS, GLONASS, BDS, Galileo, NAVIC, QZSS multi-system joint positioning
- What you will get: 1 X Wireless Tracker Development Board with 915MHz LoRa Antenna
- Onboard Wi-Fi, Blue-tooth dedicated 2.4GHz metal spring antenna, reserved IPEX (U.FL) interface for LoRa and GNSS use
- Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching).
- It is perfectly compatible with Arduino and Meshtastic, can be widely used in development such as bicycle sharing services, tracking pets or livestock, locating vehicles, tracking children, etc.
9.5Excellent
View offer on:
Show more
5
SparkFunSparkFun Triband GNSS RTK Breakout-Channel GNSS Receiver, high Precision RTK Position Module, USB Type C, Board Dimensions: 2.0in. x 2.0in. (50.8mm x 50.8mm)
Main highlights- We've included a rechargeable backup battery to keep the latest module configuration and satellite data available. This battery helps 'warm-start' the module, decreasing the time-to-first-fix dramatically. This module features a survey-in mode, allowing the module to become a base station and produce RTCM 3.x correction data. A SMA connector is included for a secure connection to a Triband GNSS antenna.
- The UM980 is a 1408-Channel GNSS Receiver based on the Nebulas IV that is able to simultaneously track GPS L1/L2/L5, GLONASS L1/L2, Galileo E1/E5a/E5b/E6, Beidou B1I/B2I/B3I/B1C/B2a/B2b, QZSS L1/L2/L5, and SBAS. With this board, you will be able to know where your (or any object's) X, Y, and Z location is within roughly the width of your fingernail.
- The SparkFun Triband GNSS RTK Breakout features the UM980 GNSS high precision RTK position module from Unicore Communications.
- Features: Velocity Accuracy (RMS): 0.03m/s, Time Accuracy (RMS): 20ns, Supports NMEA, RTCM, and Unicore (w/ specific firmware) protocols over UART, Integrated SMA connector for use with multiband GNSS antenna of your choice, Voltage: 5V or 3.3V but all logic is 3.3V, USB Type C Connector, ESD Protection Diodes for USB Data Lines, Built-in Resettable PTC Fuse 6V/1.5A.
- Currently, serial UART is only supported on the UM980 module. All three serial UART ports have been broken out to the USB-C connector via CH340, 4-pin locking JST connector, and BlueSMiRF header. Unique pins have also been broken out to the edge of the board. Various jumpers are also included to configure power and LEDs.
9.3Excellent
View offer on:
Show more
6
SparkFunSparkFun RTK Express Kit - High Precision geolocation and Surveying Take Centimeter Grade Measurements - Includes Includes GNSS Receiver Carry case GNSS L1/L2 Multi-Band Antenna and More
Main highlights- Not Included/Optional: Camera Mono-pole or Tri-pod; Phone/Enclosure Holder; Telemetry Radios - 500 mW; microSD Card - 16 GB
- Included: SparkFun RTK Express GNSS Receiver; RTK Kit Carrying Case; GNSS L1/L2 Multi-Band Antenna - TOP106; Antenna Interface Cable - SMA to TNC (300 mm); 1/4" to 5/8" Antenna Thread Adapter; USB Wall Charger - 5 V, 2 A; USB A to C Cable - 0.8 m; Data Cable; Radio Cable
- Important: SparkFun RTK Express NOT designed for permanent outdoor mounting; Mount L1/L2 antenna outside; Run SMA cable to RTK Surveyor located inside protected from the elements
- For Basic and Advanced Users: Easy to get up and running; Flexible and powerful tool
- Centimeter grade measurements: Use a phone for RTCM correction data; No available online source, may need a 2nd RTK Express setup in base mode and a radio link connecting the Base to the Rover
- Based on ESP32 and ZED-F9P chips: 300 mm approximate accuracy out of the box and 14 mm accuracy with RTCM corrections
9.1Excellent
View offer on:
Show more
7
SingularXYZE1 GNSS IMU RTK GPS Surveying Equipment Rover Receiver Rtk Gnss Handheld Collector and Survey Software, 1408 Channels, 1cm Accuracy, 5km Distance
Main highlights- 【Smaller, Lighter】E1 is compact and lightweight, with dimensions of Φ133.5 mm × 67 mm and a weight of 870g, ensuring ease of use without sacrificing performance.
- 【RTK Corrections Service/CORS Requirement】The E1 rover must connect to an RTK corrections service or a Continuously Operating Reference Station (CORS). You can purchase a third-party RTK service account or set up a GSM base station to get an RTK FIX solution. Check if your location is covered by CORS; you may need to buy local CORS services.
- 【Over 20hrs Operation】With optimized charging safety and internal battery design, E1 offers over 20 hours of continuous operation on a single charge, with fast charging support via Type-C port.
- 【Notes】Surveying software already installed in Handheld and Permanently valid.E1 GNSS receiver is compatible with regular 5/8" thread range poles.
- 【Full-Constellation, Fixed in Seconds】E1 achieves stable fixed solution rapidly, even in challenging environments like multipath, tree canopy, and city canyons.E1 is equipped with a high-precision GNSS engine for simultaneously tracking GPS, BDS, GLONASS, Galileo, QZSS, IRNSS & SBAS.
- 【60° Tilt, 5s Initialization】Equipped with a new generation IMU module, E1 initializes in just 5 seconds and allows tilt measurements up to 60°, ensuring ±2.5cm accuracy for the entire work.
- 【5 Kilometers】E1 RTK GNSS Surveying System with IMU has a long transmission distance, Radio range between the rover and the base can reach 5 kilometers (3.1miles). Also E1 can compatible with base stations of other brands in both Radio and CORS mode. Support RTCM v3/CMR correction data transmission.
8.9Very Good
View offer on:
Show more
8
SparkFunSparkFun Triband GNSS RTK Breakout - Mosaic-X5 high-Precision GNSS Receiver, with SD Capabilities and USB-2.0, MultiBand GPS Antenna, Board Dimensions: (Inches) 2.50 x 2.00
Main highlights- Simultaneously use L1, L2, and L5 GPS bands: Easiest way to get started; Supports the GPS (USA), GLONASS (Russia), Beidou (China), Galileo (Europe), and NavIC (India) constellations, including regional systems (i.e. SBAS and QZSS)
- Reat Time Kinematics (RTK): Operate as a base station: Broadcast RTK correction data; Or as a rover: Utilizing RTK correction data record positions with extreme precision
- Note: Multi-band capabilites of the mosaic-X5 module; we highly recommend that users pair the module with a suitable GNSS antenna that can support all the GNSS frequency bands the module is compatible with
- GNSS receiver: Ultra-low power, multi-band, multi-constellation board capable of delivering centimeter-level precision; High update rates
- Features: mosaic-X5 GNSS Receiver; USB-C Connector; µSD Card Slot (up to 32 GB w/ FAT32 file system); SMA Connectors; GPS Antenna (Active, Multi-band); PPS Output (3.3 V); UART (x4); USB 2.0; SD Card; GPIO/LEDs
8.8Very Good
View offer on:
Show more
9
SparkFunSparkFun RTK Express Plus Kit - High Precision geolocation and Surveying Take Centimeter Grade Measurements - Includes GNSS Receiver Carry case GNSS L1/L2 Multi-Band Antenna and More
Main highlights- Note: L1/L2 antenna has 5/8" thread which will fit most surveying platforms; Kit includes a 5/8" to 1/4" adapter as well which will fit most camera mono-pods and tripods; May need additional adapters for your specific equipment
- Not Included/Optional: Camera Mono-pole or Tri-pod; Phone/Enclosure Holder; Telemetry Radios - 500mW; microSD Card - 16GB
- Included: SparkFun RTK Express Plus GNSS Receiver; RTK Kit Carrying Case; GNSS L1/L2 Multi-Band Antenna - TOP106; Antenna Interface Cable - SMA to TNC (300 mm); ¼ in to ⅝ in Antenna Thread Adapter; USB Wall Charger - 5 V, 2 A; USB A to C Cable - 0.8 m; Data Cable; Radio Cable
- Important: SparkFun RTK Express Plus NOT designed for permanent outdoor mounting; Mount L1/L2 antenna outside; Run SMA cable to RTK Surveyor located inside protected from the elements
- For Basic and Advanced Users: Easy to get up and running; Flexible and powerful tool
- Centimeter grade measurements: Use a phone for RTCM correction data; No available online source, may need a 2nd RTK Express setup in base mode and a radio link connecting the Base to the Rover
- Based on ESP32 and ZED-F9P chips: 300 mm approximate accuracy out of the box and 14 mm accuracy with RTCM corrections; Can use in two modes: GNSS Positioning (~30 cm accuracy); GNSS Positioning with RTK (1.4 cm accuracy)
8.7Very Good
View offer on:
Show more
10
SMAJAYUSMA26 RTK Rover with Collector Installed Permanent Surveying Software, RTK Receiver NOAA certificated,Static Survey,RTK Survey by CORS and PPP Survey for Topographic,Land Surveying (Exclude Pole)
Main highlights- 【Tech Support】For sure buyer can contact seller tech team for support by email to make sure the equipment 100% works well. Please refer to the PDF e-manual and operation videos as well.
- 【RTK Software】 The RTK surveying software is pre-installed on the handheld collector and is permanently valid. Users can always access a download link to update the software to the latest version
- 【RTK Connection】 Rover+CORS: login CORS account on software till RTK fixed. This is economic solution for the area with free CORS network
- 【Capability】 ①RTK GPS Land surveying equipment Rover+ Collector(Software permanent valid) ②Dual Frequency and Full-Constellation ③30°-60° IMU tilt measurement with centimeters accuracy ④2 working days battery life each charge. ⑤10cm accuracy by PPP method, no need base station. ⑥2.5cm accuracy by CORS network station
- 【Application】 The R26 RTK GNSS receiver provides the accuracy needed for a wide range of surveying and engineering applications, including topographic surveying, geographic surveying, engineering surveying, agriculture field measurement, mine surveying, construction surveying ...
- 【Advantages】 ①Born for Rover+CORS by login a CORS account on collector. ②NOAA: SMA26 antenna is NOAA certificated which adapt for US National spatial reference system and other standard post-processed software. ③Data output format: Differential data: RTCM3.X, Location data: NMEA-0183, Static data: Binary which can be converted to Rinex. ④PPP method: PPP method by Galileo HAS correction, No need Base. ⑤Connection by: BT/WiFi/USB-Type-C/TNC Connector/Serial Port(DB9 cable optional)
- Multiple constellation adaptable to any country and suitable for use in various complex and challenging environments: - GPS L1C/A/L2P(Y)/L2C /L5 - GLONASS G1/G2/G3- BDS B1I/B2I/B3I/B1C/B2a/B2b* - GALILEO E1/E5a/E5b /E6* - QZSS L1, L2, L5
8.5Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for gps gnss l1 l2 receiver
