Gps Glonass Nmea0183s of 2025
Best Choice1
GeekstoryGeekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna + BN-880 GPS Module U8 with Flash HMC5883L Compass + GPS Active Antenna Support GPS Glonass
Main highlights- The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place. When you use it for Raspberry Pi, there is no driver needed but you need to install software.
- Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it. When you use it for Raspberry Pi, there is no driver needed but you need to install software.
- BN-880 is suitable for Open source flight controller, not for flight control with SCM, Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L.
- BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass.
- 1 PCS BN-220 Dual GPS module + 1 PCS BN 880 GPS module U8 with Flash HMC5883L Compass.
9.8Exceptional
View offer on:
Show more
How do we rank?
Using our advanced technology, we scan thousands of products and stores, analyzing reviews, ratings, and trends to find what matters most to users like you.Our team then reviews the data and real user feedback, combining AI and human insights to bring you real-time, top-rated recommendations to guide your decisions with clarity and confidence.
Value for Money2
GeekstoryGeekstory BN-180 GPS Module UART TTL Dual Glonass GPS Car Navigation + BN-880 GPS Module U8 with Flash HMC5883L Compass + GPS Active Antenna Support GPS Glonass
Main highlights- This BN-180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place. This BN-180 GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it. When you use it for Raspberry Pi, there is no driver needed but you need to install software.
- BN-880 is suitable for Open source flight controller, not for flight control with SCM, Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L.
- 1 PCS BN-180 GPS Module + 1 PCS BN-220 Dual GPS module
9.6Exceptional
View offer on:
Show more
3
DIYmallsDIYmalls BN-880 GPS Module HMC5883 Compass Support GPS Glonass Beidou NMEA-0183 9600bps 1Hz for Arduino RC FPV Drone Flight Control
Main highlights- bn880 gps module is suitable for Open source flight controller, not for flight control with SCM. When you use it for r pi, there is no driver needed but you need to install software
- bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L
- bn 880 gps module has flash to save configuration. So you do not need to reset data when you use it next time.
- You can check bn180 bn220 gps module via "Visit the DIYmalls Store"
- If you have any problem, please do as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question".
9.5Excellent
View offer on:
Show more
4
GeekstoryBN-180 GPS Module UART TTL Dual Glonass GPS Car Navigation with GPS Antenna for Arduino Raspberry Pi Pixhawk Aircraft CC3D F3 Flight Controller Geekstory
Main highlights- What you will get: 1 X BN-180 GPS Module
- This BN-180 GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps
- This BN-180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd
- The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
9.3Excellent
View offer on:
Show more
5
ELOMASDrone Accessories for UBX M10 RC Drone FPV 10Hz GPS Module with Compass GNSS GPS BeiDou Galileo GLONASS QZSS SBAS Receiver 3.3-5V NMEA0183 115200 baud Replaceable
Main highlights- 5. We are specializing in RC Cars, Boats, Planes accessories,etc. You can buy with confidence.
- 4. Long service life and easy to install.
- 3. Tested in good condition,100% working!
- 2. Made of high-quality electronic components, the electronic performance is more stable.
- 1. Made of high-quality material, and less burrs and good texture. And with better wear resistance, the life time can be longer.
9.1Excellent
View offer on:
Show more
6
OHCVGFor Quescan G10A-F30 For M10050 M10 GPS GNSS Module NMEA0183 for Drone UAV FPV GPS Galileo BeiDou GLONASS QZSS SBAS ant Receiver
Main highlights- 5. For S (Super-Signal) technology offers great RF sensitivity and can improve the dynamic position accuracy by up to 25% with small antennas or in a non-line-of-sight scenario.
- 4. The high number of visible satellites enables the receiver to select the best signals. This maximizes the position accuracy, in particular under challenging conditions such as in deep urban canyons.
- 3. In the rmware described here(M10 SPG 5.10), For-M10050-KB supports concurrent reception of up to four GNSS (GPS, GLONASS, Galileo, and BeiDou).
- 2. The extremely low power consumption in continuous tracking mode allows great power autonomy for all battery-operated devices, such as asset trackers, without compromising on GNSS performance .
- 1. For QUESCAN G10A-F30 GNSS module is based on the For -M10050-KB chip, which is part of the M10 standard precision GNSS platform, provides exceptional sensitivity and acquisition times for all L1 GNSS systems.
8.9Very Good
View offer on:
Show more
7
YJhGFqSYJhGFqS Quescan G10A-F30 UBX M10050 M10 GPS GNSS Module NMEA0183 Compatible Receiver for Drone UAV GPS Galileo BeiDou GLONASS QZSS SBAS
Main highlights- Versatility: Works with Drone, UAV, , and other aerial vehicles.
- Standards: Complies with NMEA0183, ensuring wide usage.
- Multi-Constellation: Capable of connecting to GPS, Galileo, BeiDou, GLONASS, and QZSS.
- Model: Quescan G10A-F30 designed for GPS applications.
- Enhancement: Features SBAS for improved positional accuracy.
- Easy Integration: Simple setup to enhance your navigation systems.
- Compatibility: Supports UBlox M10050 and M10 GPS GNSS modules.
8.7Very Good
View offer on:
Show more
8
OHCVGFor UBX M10 RC Drone FPV 10Hz GPS Module with Compass GNSS GPS BeiDou Galileo GLONASS QZSS SBAS Receiver 3.3-5V NMEA0183 115200 baud
Main highlights- 5. We are specializing in RC Cars, Boats, Planes accessories,etc. You can buy with confidence.
- 4. Long service life and easy to install.
- 3. Tested in good condition, working!
- 2. Made of electronic components, the electronic performance is more stable.
- 1. Made of material, and less burrs and good texture. And with better wear resistance, the life time can be longer.
8.6Very Good
View offer on:
Show more
9
HYtdEGVQuescan G10A-F30 UBX M10050 M10 GPS GNSS Module NMEA0183 Compatible Receiver Compatible with Drone UAV GPS Galileo BeiDou GLONASS QZSS SBAS
Main highlights- Versatility: Ideal Compatible with drones, UAVs, and setups, enhancing navigation capabilities.
- Performance: Equipped with SBAS Compatible with improved accuracy and reliable location data.
- Multinetwork: Facilitates GPS, GLONASS, Galileo, BeiDou, and QZSS Compatible with comprehensive positioning.
- Model: Quescan G10A-F30 is tailored Compatible with in GPS applications.
- Ease of Use: Simple installation process, making it user-friendly Compatible with hobbyists and professionals alike.
- Durability: Built to withstand the demands of outdoor environments Compatible with extended usability.
- Compatibility: Supports NMEA0183 standard, ensuring easy integration with various devices.
8.5Good
View offer on:
Show more
10
GeekstoryGeekstory BN-180 GPS Module UART TTL Dual Glonass GPS Car Navigation + BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna
Main highlights- This BN-180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place. This BN-180 GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it. When you use it for Raspberry Pi, there is no driver needed but you need to install software.
- BN-880 is suitable for Open source flight controller, not for flight control with SCM, Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L.
- 1 PCS BN-180 GPS Module + 1 PCS BN-220 Dual GPS module
8.2Good
View offer on:
Show more
Similar products on Amazon
