10 Best Gps Glonass Board In The Us
Best Choice1
IdealThingShopUM982 RTK Differential Positioning Board, RTK Differential Orientation Positioning Board For Beidou GPS, For GLONASS L1/L2, For GALILEO E1/E5a/E5b/E6, For QZSS L1/L2/L5/L6
Main highlights- [Size reminder] Remember to check your specifications; the board size is approximately 70mm x 45mm.
- [Reliable signal support] It supports a variety of signals, including B1I/B2I/B3I and GPS frequencies, ensuring accurate positioning in different scenarios.
- [Instant RTK capture] The device has an impressive RTK capture speed of less than 1 second and can quickly restart after interruptions.
- [High data rate output] Real-time results are achieved with a data output rate of more than 20Hz, enabling efficient data processing in dynamic environments.
- [Design] Made of rugged PC and metal materials, this RTK differential positioning board withstands a variety of conditions while maintaining optimal functionality.
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
GarminGarmin GLO 2 GPS and GLONASS Receiver for Precise Position Information on Mobile Devices, Black
9.3 Precision8.9 Simple to use8.9 Battery DurationWhy we love it
The Garmin GLO 2 can connect wirelessly to your mobile device via Bluetooth, providing accurate position information.
The GLO 2 uses both GPS and GLONASS satellite receivers for even more precise location data.
It has a long battery life of up to 13 hours.
9.8Exceptional
View offer on:
Show more
3
DIYmallsDIYmalls BN-220 GPS Module TTL Dual GPS Glonass w/Flash NMEA-0183 9600bps 1Hz for Arduino RC FPV Drone Flight Control
Main highlights- bn220 gps has flash to save configuration, so you do not need to reset data next time when you use it. But bn220 gps doesn't have compass. If you need gps with flash and compass, please check bn-880 gps via "Visit the DIYmalls Store"
- When you use it for pi, there is no driver installation needed but you need to install software
- When you power up bn 220 GPS module the first time in a new location, it always takes longer to find satillites. This is referred to as “cold start”. Once you’ve done it the first time, later when you restart bn220 GPS module, it will get a lock much faster.
- If you have any problem, please do as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question".
- Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
9.5Excellent
View offer on:
Show more
4
HiLetgoHiLetgo VK172 G-Mouse USB GPS/GLONASS USB GPS Receiver for Windows 10/8/7/VISTA/XP
Main highlights- VK172 G-MOUSE USB GPS/GLONASS USB GPS Receiver
- VK172 G-MOUSE USB GPS Receiver for Windows 10/8/7/VISTA/XP
- Tracking sensitivity:-162dBm
- Supported operating systems: Windows 10/8/7/Vista/XP/CE
- Reference coordinate system: WGS-84
9.4Excellent
View offer on:
Show more
5
ArduinoMKR GPS Shield [ASX00017] - High-Performance GNSS Module for Arduino MKR Boards, Featuring u-blox SAM-M8Q, Multi-Constellation Support (GPS, GLONASS, Galileo), and Plug 'n' Play Functionality.
Main highlights- Plug and Play Convenience: Designed specifically for MKR format boards, the shield offers a straightforward plug 'n' play experience. It can also be easily connected to any compatible board with an Eslov connector using the supplied cable, making it versatile for various projects.
- Multiple Interface Compatibility: The MKR GPS Shield can interface with Arduino boards through a serial connection when mounted directly or via an I2C connection using the Eslov cable. This flexibility ensures compatibility with a wide range of Arduino projects.
- Flexible Configuration Options: This shield supports configuration through specialized commands, with an onboard battery holder that retains custom settings even when powered off. Ideal for applications requiring specific operational modes, such as high-altitude experiments or specialized localization requirements.
- Comprehensive Library Support: Utilize the Arduino_MKRGPS library, which simplifies access to GPS data and offers a consistent API across both interfaces. This makes it easy for users to integrate GPS functionality into their projects, whether for fleet monitoring, scientific research, or outdoor navigation.
- Advanced GNSS Technology: The MKR GPS Shield is equipped with the u-blox SAM-M8Q module, allowing simultaneous reception and processing of GPS, GLONASS, and Galileo signals for highly accurate positioning and localization in various environments.
9.3Excellent
View offer on:
Show more
6
HCJYC3-in-1 Set - GNSS Module Receiver with 2 Pack of Prototyping Boards for Flipper Zero Comes with Silicone Protective Case - Supports GPS, BeiDou (BDS), GLONASS and QZSS Systems
Main highlights- UART communication baud rate: 4800~115200bps (9600bps by default)
- Support various GNSS systems such as GPS, BeiDou (BDS), GLONASS and QZSS; Support AGNSS; Will Also Support NMEA 0183 standard protocol and CASIC proprietary protocol
- Prototype your own external GPIO module for Flipper Zero quick and easy with the 2 Prototyping Boards (Pin headers included, soldered)
- Plug and play Module Set, no software installation required, specially designed for Flipper Zero.
- Package inclued: 1*GNSS Module for Flipper Zero; 1*Active GNSS antenna(support GPS L1 C/A, BDS B1 and GLONASS L1 bands); 2*Small Breakout board for Flipper Zero(Pin headers included, soldered); 1* Silicone Case for Flipper Zero
9.2Excellent
View offer on:
Show more
7
NewHailNewHail GNSS Module Receiver for Flipper Zero,Supports GPS, BeiDou (BDS), GLONASS and QZSS Systems, with Active GNSS Antenna for Flipper Zero
Main highlights- UART communication baud rate: 4800~115200bps (9600bps by default)
- Support Multi-GNSS systems: GPS, BeiDou (BDS), GLONASS and QZSS;Support AGNSS;Support NMEA 0183 standard protocol and CASIC proprietary protocol
- Plug-and-Play module designed specially for Flipper Zero
- Package list: 1x GNSS Module for Flipper Zero; 1x Quick start guide; 1x High-performance active GNSS antenna(support GPS L1 C/A, BDS B1 and GLONASS L1 bands)
- Green LED for indicating the 1PPS output on fix;Pre-soldered CR1220 coin cell holder
- Built-in Low-Noise Amplifier (LNA) for improved reception sensitivity;Built-in SAW Filter for enhanced noise reduction performance
9.1Excellent
View offer on:
Show more
8
XYGStudyfor Raspberry Pi GNSS HAT Based on MAX-M8Q Support Multi-Constellation Receiver GPS Beidou Galileo GLONASS Support Augment Systems Like SBAS QZSS IMES and D-GPS Accurate Fast Positioning @XYGStudy
Main highlights- This is a Raspberry Pi GNSS HAT based on MAX-M8Q with multi-constellation receiver support, which means up to 3 types of GNSS satellite systems can be used together, including GPS, Beidou, Galileo, and GLONASS. It also support augment systems like SBAS, QZSS, IMES, and D-GPS. It features accurate & fast positioning with minor drifting, low power consumption, outstanding ability for anti-spoofing & anti-jamming, and so on.
- Part Number: MAX-M8Q GNSS HAT
- Multi-constellation receiver support, concurrent reception of up to 3 types of GNSS satellite systems from GPS, Beidou, Galileo, and GLONASS, and still retains low power consumption. Augment systems support, including SBAS, QZSS, IMES, D-GPS, improving the positioning performance of service location
- GNSS module based on MAX-M8Q for Raspberry Pi, accurate & fast positioning with minor drifting, low power consumption, outstanding ability for anti-spoofing & anti-jamming
- Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
8.9Very Good
View offer on:
Show more
9
SparkFunSparkFun GPS Breakout - ZOE-M8Q (Qwiic)-High Accuracy Miniaturized Board- 72-Channel GNSS Receiver Receive Signals from GPS GLONASS BeiDou Galileo Constellations-Increase Precision Decrease Lock time
Main highlights- Velocity Accuracy: 0.05m/s. Heading Accuracy: 0.3 degrees. Time Pulse Accuracy: 30ns. 3.3V VCC and I/O. Current Consumption: ~29mA Tracking GPS+GLONASS
- Thanks to the onboard rechargable battery you'll have backup power enabling the GPS to get a hot lock within seconds!
- Supports NMEA, UBX, and RTCM protocols over UART or I2C interfaces
- Software Configurable: Geofencing, Odometer, Spoofing Detection, External Interrupt, Pin Control, Low Power Mode, and Many others!
- 72-Channel GNSS Receiver. 2.5m Horizontal Accuracy. 18Hz Max Update Rate, Time-To-First-Fix: Cold: 26s and Hot: 1s. Max Altitude: 50,000m. Max G: ≤4. Max Velocity: 500m/s
8.8Very Good
View offer on:
Show more
10
wavesharefor Raspberry Pi GSM/GPRS/GNSS Bluetooth HAT Expansion Board GPS Module SIM868 Compatible for Raspberry Pi 2B 3B 3B+ 4B Zero Zero W Support Make a Call,Send Messagess,Data Transfer
Main highlights- Standard RPi 40PIN GPIO extension header, fits Raspberry Pi series boards(Pi 4 B);Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.;Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning
- Bluetooth 3.0, supports data transferring through Bluetooth;Onboard USB TO UART converter CP2102 for UART debugging
- Baudrate auto detection (1200bps ~115200bps);Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands);Supports SIM application toolkit: GSM 11.14 Release 99
- 6x LEDs for indicating the module working status;SIM card slot for 1.8V/3V SIM card;RTC with backup battery holder
8.7Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for gps glonass board
