10 Best Gps Antenna Support In The Us - Black Friday 2024
Best Choice1
BINGFUBingfu High Precision Positioning GNSS Antenna TNC Female Magnetic Base Antenna Support GPS Beidou GLONASS and Galileo System for Vehicle Marine Boat Positioning Smart Agriculture Drone Positioning
Main highlights- Sturdy Structure: High-quality materials, with explosion-proof cracking, UV resistance, waterproof level up to IP67, etc., to ensure long-lasting durability and reliability in harsh environments.
- Precision Design: Designed for fast and accurate positioning, it performs well even in complex environments, and featuring an ultra-thin flying saucer shape to reduce wind resistance.
- Package Content: 1 x Antenna
- Frequency: 170MHz - 240MHz (Band III) 1452MHz - 1492MHz (L-Band); Impedance: 50 Ohm; Polarization: right-handed circular polarization; VSWR: ≤ 2.0; Connector: TNC Female.
- Four-System Coverage: The four system full frequency GNSS antenna, supports GPS, BeiDou, GLONASS and GALILEO, meeting the compatibility and matching of multiple systems, and is plug and play.
- Easy Installation: With an 8.8 cm /3.46 inch diameter strong magnetic base, it is easy to install and allows for secure and flexible placement on various surfaces.
- Application: Widely used in vehicle positioning, smart agriculture, unmanned aerial vehicle positioning, container operations at ports, driving test systems, environmental measurement, surveying and mapping, maritime applications, and other scenarios.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
NewHailNewHail GNSS Module Receiver for Flipper Zero,Supports GPS, BeiDou (BDS), GLONASS and QZSS Systems, with Active GNSS Antenna for Flipper Zero
Main highlights- UART communication baud rate: 4800~115200bps (9600bps by default)
- Support Multi-GNSS systems: GPS, BeiDou (BDS), GLONASS and QZSS;Support AGNSS;Support NMEA 0183 standard protocol and CASIC proprietary protocol
- Plug-and-Play module designed specially for Flipper Zero
- Package list: 1x GNSS Module for Flipper Zero; 1x Quick start guide; 1x High-performance active GNSS antenna(support GPS L1 C/A, BDS B1 and GLONASS L1 bands)
- Green LED for indicating the 1PPS output on fix;Pre-soldered CR1220 coin cell holder
- Built-in Low-Noise Amplifier (LNA) for improved reception sensitivity;Built-in SAW Filter for enhanced noise reduction performance
9.7Exceptional
View offer on:
Show more
3
GeekstoryGeekstory USB GPS Module Antenna Supports GPS+GLONASS Beidou Built-in Flash for Arduino Pixhawk IPEX Compatible, Better Than VK-162
Main highlights- The product documentation link cannot be displayed. If you need technical documentation, please click “Geekstory”, click “Ask a question” to em-ail us
- Supports GPS+GLONASS (default); GPS+Beidou;GLONASS+ BeiDou multiple modes Built-in LNA signal amplifier
- Documentation you can find at the bottom of the details page - Product guides and documents: (User Manual (PDF), which contains details on how to use and links to the drivers.
- Built-in TCXO Crystal and Farad Capacitors for Faster Hot Start
- Built-in Flash, free configuration product baud rate, output statement, output rate, second pulse and other parameters
9.6Exceptional
View offer on:
Show more
4
GeekstoryVK-162 G-Mouse USB GPS Dongle Navigation Module External GPS Antenna Remote Mount USB GPS Receiver for Raspberry Pi Support Google Earth Window Linux Geekstory
Main highlights- VK-162 GPS support windows and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work.
- This usb gps can be used for mac computer, but it requires very professional technical skills.
- The cable length is 190cm. The USB GPS is a great, easy, and an awesome solution for travelers.It works anywhere around the world. After you download the maps for the country traveling, it will pin point exactly where you are without having to pay any service.
- It is a magntized antenna,if get the GPS signal,please use the GPS module outdoor,If you want to use the GPS module indoor,please install GPS signal amplifier in your room
- Documentation you can find at the bottom of the details page - Product guides and documents: (User Manual (PDF), which contains details on how to use and links to the drivers.
9.4Excellent
View offer on:
Show more
5
GODPEESZSAUTO Car GPS Navigation Antenna SMA Male Waterproof GPS Antenna for Car Navigation Radio DVD 4G LTE GPS Tracker Locator Vehicle Real Time Tracking Mobile DVR Video Recorder System Module
Main highlights- You Will Receive : 1 x Car GPS Antenna,1 x Double-sided Adhesive Piece (As the Picture Shown)
- Product Information : Frequency: 1575.42MHz; Power Supply DC Voltage: 3V to 5V; LNA Gain: 28dB; Cable Length: 3m/9.84ft; Connector: SMA Male
- Easy Installation : The installation features of this GPS antenna are Magnetic Mounting,Adhesive Mount,which can be adhered to any metal surface
- Applicable : For Internet Of Things IOT,4G LTE Industrial Gateway Modular Modem Mobile Router,Trail Camera,4G LTE Cellular RTU DTU Terminal
- Applicable : For Car Navigation Radio DVD,4G LTE GPS Tracker Locator,Vehicle Real Time Tracking Mobile DVR Video Recorder,Bus Truck RV Van Security Alarm System
9.3Excellent
View offer on:
Show more
6
QGP SupplyWaterproof GPS Active Antenna, Magnetic Base, 28dB Gain, 3-5VDC, SMA
Main highlights- Waterproof Active GPS antenna with SMA male connector
- Magnetic base allows you to conveniently attach it to to the roof of your car.
- DC Voltage: 3V to 5V
- Cable length: 3 meters
- 28 dB of gain with its built in LNA
9.1Excellent
View offer on:
Show more
7
VFANVFAN USB GPS Receiver Antenna Gmouse for Laptop PC Car Marine Navigation Magnetic Base
8.7 worth the money8.7 Simple to use8.4 PrecisionWhy we love it
The process is menu based and easy to follow
The software is compatible with a variety of operating systems
The device is sensitive and picks up strong signals
9.0Excellent
View offer on:
Show more
8
BINGFUBingfu Vehicle Waterproof Active GPS Navigation Antenna with SMA Male Connector for Car Stereo Head Unit GPS Navigation System Module Truck Marine Boat GPS Tracker Locator Real Time Tracking
Why we love it
Strong magnetic mount for secure vehicle attachment.
Long 3m cable for flexible installation.
Improves GPS reception significantly.
8.9Very Good
View offer on:
Show more
9
ProxicastProxicast Active/Passive GPS Antenna SMA - Through Hole Screw Mount Puck Antenna with Straight SMA Male Connector on 3 ft Coax Lead - 28 dB LNA (ANT-190-010)
Main highlights- WEATHERPROOF - IP67 rated - Perfect External GPS Antenna for Car, Truck, Van, Boat or RV - Made in Taiwan
- SMA MALE CONNECTOR on 3 ft (1.0 m) of Low Loss Cable - Works with Standard GPS Receiver Outputs
- PERMANENT MOUNT - Through Hole Screw Mount Design for Vandal Resistant Mounting - No Exposed Cable
- NARROWBAND L1 FILTER (1575.42 ± 1MHz Center Frequency) Improves GPS Reception (Signal-to-Noise Ratio) and Positional Accuracy
- LOW PROFILE GPS PUCK ANTENNA for Devices with External GPS Antenna Connectors
- LOW NOISE AMPLIFIER - Boosts GPS Signal - 28 ± 4.5dB Gain - Compatible with 3~5V DC GPS Receivers (Passive Gain - 2 dBic Zenith)
8.8Very Good
View offer on:
Show more
10
MakerFocusMakerFocus Wireless Tracker with 3000mAh Battery Integrated UC6580 WiFi Bluetooth SX1262 915MHz Antenna Supports GPS GLONASS Multi System Joint Position with 0.96-inch Display for Meshtastic Arduino
Main highlights- Power Supply: Onboard SH1.25 battery interface, you can power ESP32 development board with battery whose plug is Micro JST1.25. You can use Type-C interface to power it as well. The power interface provides complete safety protection, Protect your dev board from damage
- Perfect Design: Low power design of dual frequency multi system based on 22nm technology. Onboard WiFi, Bluetooth dedicated 2.4GHz metal spring antenna, reserved IPEX (U.FL) interface for LoRa and GNSS use. Low power consumption, multi data transmission methods and interfaces to facilitate your development and application
- Main Function: Based on ESP32-S3FN8, integrates UC6580 and SX1262 to provide fast GNSS solution for IoT, Wireless Tracker supports L1 + L5/L2 and GPS, GLONASS, BDS, Galileo, NAVIC, QZSS multi-system joint positioning, can track any object and upload the data by WiFi, Bluetooth, LoRa
- LCD Display: Onboard 0.96-inch 160*80 dot matrix LCD display, which can be used to display debugging information, battery power and other information
- Applications: Perfectly compatible with Arduino, GPS module can be widely used in development such as bicycle sharing services, tracking pets or livestock, locating vehicles, tracking children, etc
8.7Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for gps antenna support
