Full Metal Hot Ends of 2025
Best Choice1
ENOMAKERBamboo Lab X1 Carbon, X1, X1C Hotend Complete Kit for X1 Series 3D Printer, Full Assembly Hardened Steel Hot End with Fan, Thermistor, Ceramic Heater, 0.4mm Nozzle, Extruder Heating Block Replacement
Main highlights- 【Unique Integrated Nozzle】The nozzle is integrated into the heat block and connected to the heatsink via a fine metal tube for optimal performance. With this design, the hotend heats up much faster than a traditional hotend, and the integrated structure effectively reduces potential issues when replacing the nozzle.
- 【Safety Cooling Fan】The cooling fan for hotend has an auto-shutoff function while being locked at rated voltage for 1-3 seconds. The circuit attempts torestartin 2 to 6 seconds. There is no damage after 72 hours of locking.
- 【Fast Heating & Accurate Temp】The ceramic heater can heat the nozzle up to 300℃ while the thermistor has highly accurate temperature measurement and reliable structural design.
- 【Bamboo Lab X1,X1C,X1 Carbon hotend complete kit】Full assembly hardened steel hot end with fan, thermistor, ceramic heater, 0.4mm nozzle,heating block replacement. It is compatible with common 3D printing filaments such as PLA and PETG etc. [not suitable for X1E]
- Hassle - free installation
9.8Exceptional
View offer on:
Show more
How do we rank?
Using our advanced technology, we scan thousands of products and stores, analyzing reviews, ratings, and trends to find what matters most to users like you.Our team then reviews the data and real user feedback, combining AI and human insights to bring you real-time, top-rated recommendations to guide your decisions with clarity and confidence.
Value for Money2
TEWIRROWTEWIRROW Upgraded Bamboo LAB Original Hotend Complete Kit with Fan for Bambu Lab X1, X1C, X1 Carbon 3D Printer Full Assembly Extruder Hot End Kit Set (0.6mm)
Main highlights- 【Ultra-Fast Heating (Up to 300°C)】 The high-efficiency ceramic heater rapidly reaches 300°C, providing optimal conditions for PLA, PETG, TPU, ABS, and more. Enjoy faster heat-up times and consistent performance across materials.
- 【Smart Cooling Fan with Safety Protection】 The closed-loop detection fan automatically shuts down if obstructed and alerts the printer to check for issues. This prevents overheating, reduces wear, and extends the fan’s lifespan—keeping your prints safe and uninterrupted.
- 【High-Stability Printing】 Built with a high-thermal-conductivity alloy heatsink and titanium alloy throat, this hotend ensures exceptional stability even during high-flow printing. The copper alloy + hardened steel nozzle further enhances durability and precision.
- 【High Speed & Precision Printing】 Unlike traditional hotends, this integrated hardened steel nozzle is fused with the heat block and connected via a fine metal tube—delivering smoother extrusion, faster printing, and superior wear resistance.
- 【Complete Hotend Kit for Bambu Lab X1 Series】 This upgraded full assembly extruder hotend includes everything you need: fan, thermistor, ceramic heater, heating block, and 0.6mm hardened steel nozzles. A perfect all-in-one replacement for hassle-free upgrades or repairs.
9.7Exceptional
View offer on:
Show more
3
WefuitWefuit Original K2 Plus Ceramic Hot End Kit with Full Metal Hardened Steel,Quick Replacement Nozzle 0.4 mm for Creality K2 Plus 3D Printer Print Head Spare Parts,350°C High Temperature Resistance
Main highlights- Suitable for printing a variety of filaments: Perfectly adapt to a variety of filaments, such as PLA, PC, ABS, PLA-CF, PETG, TPU, PP, PA-CF, PET-CF.
- Material Upgrade: Integrated all-metal design for quick assembly and disassembly: Copper alloy rebar and titanium alloy throat, plus hardened steel nozzle, three metals form an integrated all-metal kit for quick disassembly and easy replacement.
- Excellent performance: uniform heating, high thermal conductivity, and can withstand high temperatures of 350 degrees Celsius. Ceramic heaters improve heating efficiency, heat more evenly, and transfer heat faster. Easy to install and print with high flow.
- Component Strengthening: The ceramic heating block can rotate 360° for more uniform heating. Quickly heats to 200 degrees Celsius in 40 seconds.
- Compatible Models: This ceramic heater hot end kit is suitable for Creality K2 Plus 3D printer. We have added a removable replacement throat nozzle(0.4mm) based on the original hot end kit to provide diversified printing needs.
9.4Excellent
View offer on:
Show more
4
KOYOFEICreality Ender 5 Plus Full Hotend Kit, Original Fully Assembled Extruder MK8 Hot End Kit with Aluminum Heating Block 0.4mm Nozzle Teflon Tube for 3D Printer Ender-5 Plus/Ender 5 Pro/Ender 5
8.0 Print Quality8.0 Easy installation8.0 worth the money9.3Excellent
View offer on:
Show more
5
SAPLUSREPRAPCHC V6 Hotend Ceramic All-Metal: Compatible with e3d V6 hot end Full kit Voron 0.1 Voron 2.4 Prusa i3 Mini MK2 MK2S MK3/MK3S/MK3S+ (24V 60W)
Main highlights- Upgrade Ceramic heating core: better for rapid and precise temperature control, ensures consistent heating printing
- Quality Hardened Nozzle: Superior accuracy, 450C degree high temperature printing available and excellent wear resistance, enabling printing PLA ABS Carbon fiber PEEK etc
- High-quality: Copper and titanium alloys constructed heat sink, 3 times heat dissipation compared to old heat sinks
- Easy installation: Extruder hotend straightforward install on Voron V2.4 Pursa V6,or do modified on Ender 3 series printers
- 1.2 Meters Extended Cable: 24V 60W ceramic heater and 3950 100K thermistor, offering seamless compatibility with many 3D printers
9.2Excellent
View offer on:
Show more
6
WefuitUpgraded Kobra S1 Ceramic Hotend Kit,24V 48W Rapid Heating Print Head Hot End High Thermal Conductivity with 0.2/0.4/0.6/0.8mm Bimetal Nozzle for Anycubic Kobra S1 Combo/ACE Pro
Main highlights- Warm Tips:We recommend that you check whether each part is tightened before use, because the assembled hot end kit will loosen during transportation. After installing this hot end print head kit, we recommend that you realign the hot bed.
- Support high-speed printing:The assembled hot end adopts a full metal throat design to ensure that the print head is heated evenly and the filament flows smoothly in the throat nozzle, supporting high-speed printing. And produced by a strict design and testing team, no leakage and clogging.
- Super fast heating upgrade experience:We assembled the hot end kit and upgraded the heating line inside, changing to ceramic heating, which can quickly heat the print head to 220 degrees Celsius within 38 seconds. The heating speed is more than 3 times higher than the original.
- Pre-installed:The kit has an upgraded ceramic heating line print head with a pre-installed 0.4mm hardened steel nozzle. This assembled print head hot end is very easy to install on the Kobra S1/Kobra S1 Combo 3D printer. At the same time, we have equipped 4 different sizes of Bimetal nozzles(0.2/0.4/0.6/0.8) and 2 silicone sleeves for replacement to meet your multi-level printing needs.
- Compatible with 3D Printers and filament:The extruder kobra s1 hotend replacement kit is only compatible with Anycubic Kobra S1/Kobra S1 Combo FDM 3D printers. The print head for Anycubic Kobra S1 works with 1.75 mm PLA/ABS/PETG/TPU/Wood filament.
9.0Excellent
View offer on:
Show more
7
SAPLUSREPRAPV6 Volcano All Metal Hotend: Volcano Hot End Full Kit 24V High Flow｜500℃｜Extra Large Heatsink｜Plated Copper Heaterblock for Voron 0.1/2.4,Prusa i3 Mini/MK2/MK2S/MK3/MK3S,Titan,Dual Drive Extruder
Main highlights- Package included:The V6 Volcano Hotend 24V Kit inclued 24V 70W heater cartridge, 3950 thermistor, and silicone socks to ensure stable heating temperature and uniform and reliable printing
- High quality: The heater block of V6 Volcano Hot End is made of coopered plated,This copper-plated is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature printing
- Heatbreak of Volcano All Metal hotend Assembled use unique triple-metal design, by combining three different materials and Large heat dissipation area, achieved superior heat dissipation and efficiency, making it a milestone in print head technology
- Compatibility: This Upgrade V6 Volcano Hotend Kit compatible with Voron 2.4 Prusa I3 MK3 MK3S DDB Titan Extruder V6 Hot End 3D Printer
- Advantages: The V6 volcanic hot end kit has high temperature, high flow rate, smooth printing, high temperature resistance, and fast printing. The printing speed of the V6 Volcone J-Head print head is over 65% faster than that of regular hotend
8.7Very Good
View offer on:
Show more
8
XirbboBamboo Lab Hotend Complete Kit with Fan for Bambu Lab X1 Series X1 Carbon, X1, X1C 3D Printer Full Assembly Extruder Hot End Set 0.4mm
Main highlights- 【Unique Integrated Nozzle】The nozzle is integrated into the heat block and connected to the heatsink via a fine metal tube for optimal performance. With this design, the hotend heats up much faster than a traditional hotend, and the integrated structure effectively reduces potential issues when replacing the nozzle
- 【Safety Cooling Fan】The cooling fan for hotend has an auto-shutoff function while being locked at rated voltage for 1-3 seconds. The circuit attempts torestartin 2 to 6 seconds. There is no damage after 72 hours of locking
- 【Fast Heating & Accurate Temp】The ceramic heater can heat the nozzle up to 300℃ while the thermistor has highly accurate temperature measurement and reliable structural design
- X1/X1C Dedicated Hot End with Fan for Bambu Lab X1/X1C 3D Printer, Including Thermistor, Ceramic Heater, 0.4mm Hardened Steel Nozzle, Heating Block
- Easy installation: Remove the old hot end, install the new hot end and start using it
- Complete Bambu Lab X1 Series X1 Carbon, X1, X1C 3D Printer,[not suitable for X1E]
8.5Good
View offer on:
Show more
9
RICHOOSECR-10S 3D Printers Original Replacement Parts/Accessories Full Assemble MK8 Extruder Hot End Kits (with Nozzle 0.4mm /0.2mm /0.3mm /0.5mm) fit for Creality 3D Printing Printer CR-10 CR-10S S4 S5
9.3 Easy installation8.7 materials Quality8.4 worth the moneyWhy we love it
High-quality aluminum and stainless steel materials.
Compatible with various MK8 nozzle sizes.
Easy installation with clear instructions.
8.2Good
View offer on:
Show more
10
hardcore labhardcore lab V6 All Metal Hotend 24V - Compatible with e3d V6 hot end Full kit Voron 0.1 Voron 2.4 Prusa i3 Mini MK2 MK2S MK3/MK3S/MK3S+
Main highlights- Plated Copper Heat Block: This heat block with super superior heat break performance,the nickel coated copper alloy hot block will not soften at high temperatures in excess of 550℃
- Package: 1pcs Bingo Hotend set with 1.3m white thermistor extension cable and 1.2m heater extension cable
- Hardened Steel nozzle: V6 Extruder nozzles are made from the hardened steel. It reduces wear and tear on the inside and outside of the nozzle during long print runs and is more heat resistant, durable, longer life than regular brass nozzles
- Compatible with: this hotend kit is fit for e3d-V6 hotend,dragon hotend,voronV0.1 V2.4, pursa i3 mk3s ,cr-10 V2 3d printer
- Advantage: The 3d printer hotend offers reliable and consistent printing performance, suited for a wide range of applications. With its precise temperature control, it ensures accurate printing results every time
8.0Good
View offer on:
Show more
Similar products on Amazon
