Frsky Sbus Receiver Micros of 2025
- Best Choice
1
FrSkyFrSky RX8R Pro 2.4G ACCST 8/16CH SBUS Telemetry Receiver - Black
Main highlights- The FrSky RX8R Pro is an upgraded version of RX8R receiver, it has all the same features including redundancy. The new 'Pro' version has higher precision and lower latency. Its deviation of PWM is reduced to 0.5us, and the delay of PWM output is 9ms less than that of the X8R in high-speed mode. Another feature that is new with the RX8R Pro is the reduction of interference caused by the ignition process.SpecificationsDimension: 46.3mm*26.6mm*14.2mm (L*W*H)Weight: 14.8gNumbers of Channels: 16CH(1~
- Curious about how we select the top products for you? Explore How It Works
- Value for Money
2
FrSkyFrSky TD SR6 Receiver
Main highlights- TD SR6 receiver offers 6 PWM channel outputs and is bundled in a compact lightweight design, the receiver also provides output pins accordingly for SBUS Out and FBUS/S.Port. By setting the S.Port to the FBUS protocol, the TD receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the build setup.
- Stabilization Function The TD SR6 offers an enhanced Stabilization function which is an upgrade over the original classical gyroscope stabilization modes. The TD SR6 offers an advanced mode that provides more programmable stabilized channels and flexibility. The classical stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes like Stabilization, Auto-Level, Hover, and Knife-Edge with an airplane model.
- Simultaneous working 2.4G&900M dual-band TD mode Dual-band antenna design for multi-directional coverage Compact lightweight design Built-in Stabilization Function Black Box function 4ms race mode with telemetry Long control range (Range varies based on the RF Power settings.) Over-The-Air (OTA) FW update 6 PWM channel ports FBUS / S.Port SBUS Out (Supports 16CH / 24CH mode)
- In the advanced stabilization mode, all the output pins are configurable for stabilization and additional advanced features such as Stab file sharing, programmable parameters, developer access, etc.
- Frequency: 2.4GHz & 900MHz Dimension: 47.5×20.4×10.9mm (L*W*H) Weight: 11.5g Operating Voltage: 3.5-10V (recommend 3.7-8.4V) Operating Current: ≤110mA@5V Compatibility: TANDEM series radio & RF module in TD mode. 2.4G/900M antenna connector: IPEX1 Voltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)
3
FrSkyFrSky XM+ SBUS Mini Receiver - Black
Main highlights- FrSky XM+ Receivers are now coming installed with ACCST 2.0 firmware. This is not compatible with ACCST 1.0 controllers and firmware updates will be required if there is a firmware mismatch. Firmware can be found here: https://www.frsky-rc.com/xm-plus-mini-sbus-non-telemetry-full-range/ (Select history firmware download for ACCST 1.0 firmware)FrSky XM+ Ultra Mini SBUS Receiver, ONLY 1.6gSpecificationDimension: 21.5x12x3.5mm(LxWxH)Weight: 1.6gNumber of Channels: Up to 16CH from SBUS(CH1~CH15 for
4
FrSkyFrSky Taranis Receiver X8R 8 Channel 2.4ghz ACCST&RSSI&SBUS
Main highlights- With RSSI PWM output (0~3.3V)
- SmartPort enabled, realizing two-way full duplex transmission.
- Parallel two X8R to become a 16 channel receiver.
- More number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port,or combine two X8R to become a 16 channels receiver.
- All 16 channels requires the FrSky Taranis, or the XJT module bound in D16 mode. For 8 channels in D8 Mode you can use the FrSky Taranis or XJT, DJT, DFT, DHT and DHT-U modules.
5
FrSkyFrSky Archer Plus R6 Receiver
Main highlights- The Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to the receivers with anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function, some basic flight data (like Power & Signal related) can be well preserved.
- The Archer Plus R6 6 high-precision PWM channel receivers are ideal for any type of glider pilot, it supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range. The R6 can be used as a Primary receiver in a redundant solution by wiring the SBUS In port and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup.
- Number of Channels: 6/24 channels 6 High-precision PWM & 16 SBUS channels Mode 6 High-precision PWM & 24 SBUS channels Mode Operating Voltage Range: 5 -10V Operating Current: <65mA@5V Operating Range: >2km (Full range)(*Range may vary based on local conditions.) Voltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10) Antenna connector: IPEX4 Compatibility: FrSky 2.4GHz ACCESS / ACCST D16 capable transmitters
- Enhanced Anti RF-Interference capability with more solid RF performance Smart-matched ACCESS & ACCST D16 modes Supports basic Black-Box function 6 high-precision PWM channel ports SBUS Out port(Supports 16CH/24CH mode) Supports signal redundancy (SBUS In) Full control range with telemetry (S.Port or FBUS) Over-The-Air (OTA) FW update External battery/device voltage detection
6
FrSkyFrSky 2.4G 900M Tandem Receiver TD R6 Receiver with 6 Channel Ports
Main highlights- The Tandem series receivers adopt a dual-band antenna design (2.4GHz & 900MHz) that provides multi-directional wide coverage for the remote signal. The telemetry data (Power & Signal related) can be recorded using the built-in black box module within the Tandem receiver, useful for capturing data from any unusual status during the flight.
- TD R6 receiver offers 6 PWM channel outputs and is bundled in a compact lightweight design, the receiver also provides two 3-pin ports accordingly for SBUS Out and FBUS/S.Port. By setting the S.Port to the FBUS protocol, the TD receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the build setup.
- Simultaneous working 2.4G&900M dual-band TD mode Dual-band antenna design for multi-directional coverage Compact lightweight design Black Box function 4ms race mode with telemetry
- Long control range (up to 50KM – 100KM) Over-The-Air (OTA) FW update 6 PWM channel ports FBUS / S.Port SBUS Out (Supports 16CH / 24CH mode)
- Frequency: 2.4GHz & 900MHz Dimension: 47.5*20.4*10.9mm (L*W*H) Weight: 11.5g Operating Voltage: 3.5-10V(recommend 3.7-8.4V) Operating Current: ≤110mA@5V
- Compatibility: TANDEM series radio & RF module in TD mode. 2.4G/900M antenna connector: IPEX1
7
FrSkyFrSky RX8R PRO Receiver Including Redundancy 2.4G ACCST 8/16CH SBUS Telemetry Receiver
Main highlights- Support redundancy function
- Strong anti-interference performance
- Smart Port enabled and support telemetry data transmission
- Lower latency on the PWM output
- Higher precision deviation of PWM
8
FrSkyFrSky Archer Plus SR10+ Receiver
Main highlights- ● Over-The-Air (OTA) FW update ● External battery/device voltage detection●Compatibility: FrSky 2.4GHz ACCESS / ACCST D16 capable transmitters
- With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup.
- The SR10+ supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range. The SR10+ can be used as a Primary receiver in a redundant solution by setting a port as SBUS In and connecting to any other FrSky receiver equipped with an SBUS Out port.
- The Archer Plus SR10+ are gyro-stabilized receivers with a built-in 3-axis gyroscope and 3-axis accelerometer and feature multiple flight modes (Auto-level, Stabilization, Knife-Edge, etc.) and configuration methods. The SR10+ receivers have 10 configurable channel ports, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port.
- Enhanced Anti RF-Interference capability with more solid RF performance ● Smart-matched ACCESS & ACCST D16 modes ● Supports basic Black-Box function (Available later by updating the FW.) ● Built-in 3-axis gyroscope and 3-axis accelerometer sensor ● Multiple flight modes and configuration tools (ETHOS, LUA scripts, etc.) ● 10 configurable channel ports (PWM, SBUS, FBUS, or S.Port) ● Supports signal redundancy (SBUS In) ● Full control range with telemetry (S.Port or FBUS) ● Anti-interference capability in the spark-ignition process
9
HelidirectFrSky Twin Mini Dual 2.4GHz RC Receiver with IPEX1 Antenna Connector - Remote Control Helicopter Electronics, FrSky Twin Receiver SBUS Out (Supports 16CH / 24CH Mode) (03022040)
Main highlights- This receiver is designed for RC users who want to benefit from resilience and long-range in their radio communi-cations, typically tens of kilometers are achievable. The TW Mini receiver is lightweight and tiny, making it suitable for building into racing drones or airplanes with limited installation space and weight constraints
- The TW active-active protocol is different from the general active-standby redundancy solutions (where one receiver takes over signal control only when the other is in Failsafe mode), with the TW protocol, dual 2.4G frequency bands are active on the TW series receiver at the same time.
- The TW Mini receiver is equipped with 2x 2.4G antennas. The TW Mini includes one SBUS output channel, it supports telemetry functions through FBUS / S.Port.
- TWIN series TW Mini receiver features a new stable TW protocol that benefits from simultaneously integrating dual active 2.4G frequency bands.
- By setting the TW Mini to use FBUS protocol in the ETHOS system, the signal control and telemetry can be connected to any device that supports FBUS protocol through only one line to achieve bidirectional transmission, also simplifying the model build using fewer wires.
10
FrSkyFrSky TW GR6 Receiver
Main highlights- Simultaneous working dual 2.4G TW mode High-precision variometer sensor Black-Box function 4ms race mode with telemetry Long control range (Range varies based on the RF Power settings.)
- Over-The-Air (OTA) FW update 6 PWM channel ports SBUS Out (Supports 16CH / 24CH mode) FBUS / S.Port Inverted S.Port
- Antenna connector: IPEX4 Compatibility: TWIN series Radio & RF module in TW mode.