Frsky Receiver Olans of 2025
Best Choice1
FrSkyFrSky Tandem X18 Compatible with ACCST Receivers - D16 V2 or Later FW Access - R9 TD Receivers (Blue)
Main highlights- TD-ISRM RF Module Built-in TD 900M/2.4G Dual-Band Internal RF Module Supports Multiple Working Modes 2.4G ACCST D16 Mode (Compatible with ACCST Receivers with D16 V2 or later FW) 2.4GACCESS Mode (Compatible with ACCESS Receivers)* 900M ACCESS Mode (Compatible with ACCESS R9 868/915MHz Receivers)* (*Capable of simultaneous working under ACCESS mode)
- High-Precision Hall-Sensor Gimbals with a Metal Panel 6 Quick-Mode Custom Buttons (Front) and 2 Momentary Buttons (Rear) Lite Type External Module Bay Haptic Vibration Alerts and Voice Speech Outputs Supports Recharge System for 2S Li-ion Battery (USB Type-C Interface) High-speed PARA Wireless Training System
- Hardware Enhanced ergonomic designed case with comfortable rounded hand grips 4 Standard Trims with additional 2 extra trims Integrate flash storage but also keep the internal TF card slot Easy-to-reach top switches and sliders With a flat base to improve stability when standing the radio Color Touch-Screen Displays
- ETHOS System Clear and Intuitive UI Design Supports Dual Operation Modes of Radio Display (Touch and Non-Touch) Supports Multi-Language Switching Hardware/Software Version and Factory Version Detection Supports running LUA Scripts
- 2.4G & 900M TD Mode (Compatible with TD Receivers) Long-range control and super-low latency with telemetry (*Up to 50 to 100KM range and down to 4ms end-to-end latency)
9.6Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
FrSky13% OffFrSky 2.4Ghz 900Mhz TDSR10 receivers
Main highlights- The configurable 10 channel ports are a big feature of TD SR10, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. With the FBUS protocol, the TD receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the build setup.
- The classical stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes like Stabilization, Auto-Level, Hover, and Knife-Edge with an airplane model.
- The Tandem series receivers adopt the triple antenna design that provides multi-directional wide coverage for the remote signal. The data (Power & Signal related) under unusual status during the flight can be recorded by Tandem receivers through a built-in black box module.
- The Tandem dual-band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 2.4Ghz and 900Mhz frequencies. That means Tandem receivers provide not only the low latency signal and long-range control but also benefit from the enhanced level of high reliability and anti-interference performance.
- In the advanced stabilization mode, all the output pins are configurable for stabilization and additional advanced features such as Stab file sharing, programmable parameters, developer access, etc. The advanced stabilizer feature incorporates high-precision telemetry sensors to monitor altitude, vertical speed, etc. This ADV feature is an additional benefit compared to using a regular S series stabilization receiver.
- ADV Stabilizer The TD SR10 offers an ADV Stabilizer function which is an upgrade over the original classical gyroscope stabilization modes. The ADV Stabilizer offers an advanced mode that provides more programmable stabilized channels and flexibility.
9.5Excellent
View offer on:
Show more
3
FrSkyFrSky Archer Plus R6 Receiver
Main highlights- The Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to the receivers with anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function, some basic flight data (like Power & Signal related) can be well preserved.
- The Archer Plus R6 6 high-precision PWM channel receivers are ideal for any type of glider pilot, it supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range. The R6 can be used as a Primary receiver in a redundant solution by wiring the SBUS In port and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup.
- Number of Channels: 6/24 channels 6 High-precision PWM & 16 SBUS channels Mode 6 High-precision PWM & 24 SBUS channels Mode Operating Voltage Range: 5 -10V Operating Current: ＜65mA@5V Operating Range: ＞2km (Full range)(*Range may vary based on local conditions.) Voltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10) Antenna connector: IPEX4 Compatibility: FrSky 2.4GHz ACCESS / ACCST D16 capable transmitters
- Enhanced Anti RF-Interference capability with more solid RF performance Smart-matched ACCESS & ACCST D16 modes Supports basic Black-Box function 6 high-precision PWM channel ports SBUS Out port（Supports 16ＣＨ／24CH mode） Supports signal redundancy (SBUS In) Full control range with telemetry (S.Port or FBUS) Over-The-Air (OTA) FW update External battery/device voltage detection
9.4Excellent
View offer on:
Show more
4
FrSkyFrSky 2.4G 900M Tandem Receiver TD R6 Receiver with 6 Channel Ports
Main highlights- The Tandem series receivers adopt a dual-band antenna design (2.4GHz & 900MHz) that provides multi-directional wide coverage for the remote signal. The telemetry data (Power & Signal related) can be recorded using the built-in black box module within the Tandem receiver, useful for capturing data from any unusual status during the flight.
- TD R6 receiver offers 6 PWM channel outputs and is bundled in a compact lightweight design, the receiver also provides two 3-pin ports accordingly for SBUS Out and FBUS/S.Port. By setting the S.Port to the FBUS protocol, the TD receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the build setup.
- Simultaneous working 2.4G&900M dual-band TD mode Dual-band antenna design for multi-directional coverage Compact lightweight design Black Box function 4ms race mode with telemetry
- Long control range (up to 50KM – 100KM) Over-The-Air (OTA) FW update 6 PWM channel ports FBUS / S.Port SBUS Out (Supports 16CH / 24CH mode)
- Frequency: 2.4GHz & 900MHz Dimension: 47.5*20.4*10.9mm (L*W*H) Weight: 11.5g Operating Voltage: 3.5-10V(recommend 3.7-8.4V) Operating Current: ≤110mA@5V
- Compatibility: TANDEM series radio & RF module in TD mode. 2.4G/900M antenna connector: IPEX1
9.2Excellent
View offer on:
Show more
5
FrSkyFrSky TD SR6 Receiver
Main highlights- TD SR6 receiver offers 6 PWM channel outputs and is bundled in a compact lightweight design, the receiver also provides output pins accordingly for SBUS Out and FBUS/S.Port. By setting the S.Port to the FBUS protocol, the TD receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the build setup.
- Stabilization Function The TD SR6 offers an enhanced Stabilization function which is an upgrade over the original classical gyroscope stabilization modes. The TD SR6 offers an advanced mode that provides more programmable stabilized channels and flexibility. The classical stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes like Stabilization, Auto-Level, Hover, and Knife-Edge with an airplane model.
- Simultaneous working 2.4G&900M dual-band TD mode Dual-band antenna design for multi-directional coverage Compact lightweight design Built-in Stabilization Function Black Box function 4ms race mode with telemetry Long control range (Range varies based on the RF Power settings.) Over-The-Air (OTA) FW update 6 PWM channel ports FBUS / S.Port SBUS Out (Supports 16CH / 24CH mode)
- In the advanced stabilization mode, all the output pins are configurable for stabilization and additional advanced features such as Stab file sharing, programmable parameters, developer access, etc.
- Frequency: 2.4GHz & 900MHz Dimension: 47.5×20.4×10.9mm (L*W*H) Weight: 11.5g Operating Voltage: 3.5-10V (recommend 3.7-8.4V) Operating Current: ≤110mA@5V Compatibility: TANDEM series radio & RF module in TD mode. 2.4G/900M antenna connector: IPEX1 Voltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)
9.1Excellent
View offer on:
Show more
6
FrSkyFrSky Taranis Receiver X8R 8 Channel 2.4ghz ACCST&RSSI&SBUS
Main highlights- With RSSI PWM output (0~3.3V)
- SmartPort enabled, realizing two-way full duplex transmission.
- Parallel two X8R to become a 16 channel receiver.
- More number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port,or combine two X8R to become a 16 channels receiver.
- All 16 channels requires the FrSky Taranis, or the XJT module bound in D16 mode. For 8 channels in D8 Mode you can use the FrSky Taranis or XJT, DJT, DFT, DHT and DHT-U modules.
8.9Very Good
View offer on:
Show more
7
FrSkyFrSky Archer Plus SR10+ Receiver
Main highlights- ● Over-The-Air (OTA) FW update ● External battery/device voltage detection●Compatibility: FrSky 2.4GHz ACCESS / ACCST D16 capable transmitters
- With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup.
- The SR10+ supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range. The SR10+ can be used as a Primary receiver in a redundant solution by setting a port as SBUS In and connecting to any other FrSky receiver equipped with an SBUS Out port.
- The Archer Plus SR10+ are gyro-stabilized receivers with a built-in 3-axis gyroscope and 3-axis accelerometer and feature multiple flight modes (Auto-level, Stabilization, Knife-Edge, etc.) and configuration methods. The SR10+ receivers have 10 configurable channel ports, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port.
- Enhanced Anti RF-Interference capability with more solid RF performance ● Smart-matched ACCESS & ACCST D16 modes ● Supports basic Black-Box function (Available later by updating the FW.) ● Built-in 3-axis gyroscope and 3-axis accelerometer sensor ● Multiple flight modes and configuration tools (ETHOS, LUA scripts, etc.) ● 10 configurable channel ports (PWM, SBUS, FBUS, or S.Port) ● Supports signal redundancy (SBUS In) ● Full control range with telemetry (S.Port or FBUS) ● Anti-interference capability in the spark-ignition process
8.7Very Good
View offer on:
Show more
8
FrSkyFrSky R-XSR Ultra SBUS/CPPM D16 16CH Mini Redundancy Receiver for RC Multirotor FPV Racing Drone
Main highlights- US-BASED CUSTOMER SERVICE & TECHNICAL SUPPORT - Should you ever run into any problems or need assistance, we are here to help! We offer 24/7 e-mail support and are available for phone calls Monday-Friday between the hours of 9 am - 4 pm PST. Providing outstanding customer service is our number one priority.
- Switchable SBUS/ CPPM signal output
- Supports redundancy function Support telemetry and Smart Port enabled
- Notes： Flash the internal RF module of the ACCST transmitter to V2 version, and then bind the XM+ RXSR receiver. Ultra mini size and light weight
- IPEX connector, replaceable antennas
8.6Very Good
View offer on:
Show more
9
FrSkyFrSky Archer Plus RS Receiver
Main highlights- Tiny and super lightweight S.Port / F.Port / FBUS (Configurable via S.Port)
- Over-The-Air (OTA) FW update SBUS Out port (Supports 16CH / 24CH mode) SBUS In port (Supports Signal Redundancy) Inverted S.Port
- Antenna Connector: IPEX4 Control Range: Full range* with telemetry (* Full Range: ≥2km, the control range may vary based on local conditions.) Compatibility: All FrSky ACCESS/ACCST D16 transmitters.
8.5Good
View offer on:
Show more
10
FrSkyFrSky Archer Plus SR12+ Receiver
Main highlights- These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function, some basic flight data (like Power & Signal related) can be well preserved.
- The SR12+ receivers have 12 configurable channel ports*, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. The SR12+ supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range.
- The SR12+ can be used as a Primary receiver in a redundant solution by setting a port (Channel Port 1) as SBUS In and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup.
- The SR12+ also provides a socket that can be used to connect the switch panel to enable the built-in Power Switch function, and it uses a set of standard XT30 plugs which also provides a safe and efficient way to provide power. By utilizing together with current overload wires on the channel ports, the connected device can be safeguarded. (*Some features require the support of ACCESS and ETHOS.)
- The Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series. The Archer Plus series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to existing anti-interfere performance in the spark ignition process.
- The Archer Plus SR12+ are gyro-stabilized receivers with a built-in 3-axis gyroscope and 3-axis accelerometer and feature multiple flight modes (Auto-level, Stabilization, Knife-Edge, etc.). The stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes.
- Enhanced Anti RF-Interference Capability with more Solid RF Performance Smart-Matched ACCESS & ACCST D16 modes Built-in 3-Axis Gyroscope & 3-Axis Accelerometer Sensor Basic Black-Box Data Record Function Built-in Power Switch Function | Match with Different External Switches (Optional)
- Dimension: 48.5×33×17.9mm (L×W×H) Weight: 21.5g Operating Voltage Range: 3.5 -10V (Recommend 2S Li-Batteries) Operating Current: ＜115mA@5V Continuous Current: ≤20A (power the device) ｜ Instaneous Current: ≤40A (power the device) Voltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)
- Antenna connector: IPEX1 Dual XT30 Power Input Connector Compatibility: FrSky 2.4GHz ACCESS / ACCST D16 capable transmitters 12 Configurable Channel Ports (ACCESS mode) CP1: PWM / SBUS Out / FBUS / S.Port / SBUS In CP2-12: PWM / SBUS Out / FBUS / S.Port SBUS Out (Supports 16CH / 24CH mode)
- 12 Configurable Channel Ports* (PWM, SBUS, FBUS, or S.Port) (Note: In ACCST mode, SBUS Out is assigned on Pin11 & S.Port is on Pin12.) Supports Signal Redundancy (SBUS In) Full Control Range with Telemetry (FBUS / S.Port) Anti-Interference Capability in the Spark-Ignition Process Over-The-Air (OTA) Firmware Update External Battery/Device Voltage Detection
8.2Good
View offer on:
Show more
Similar products on Amazon
