10 Best Frsky R Xsr Receiver In The Us
FrSky TD SR12 Receiver 2.4Ghz 900Mhz Long Range Telemetry ADV Stabilizer Function
Main highlights- Simultaneous Working Dual-Band (900M/2.4G) TD Mode Dual Power Balancing Consumption Built-in Advanced Stabilization Functions
- Operating Current: ≤170mA Continuous Current: ≤20A (power the device) | Instaneous Current: ≤40A (power the device) Voltage Measurement Range via AIN (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)
- Frequency: 900MHz & 2.4GHz Dimension: 48.5*33*17.9mm (L*W*H) Weight: 23g Operating Voltage: 3.5-10V (Recommend 2S Li Batteries)
- FBUS / S.Port SBUS Out Port (Supports 16CH / 24CH mode) SBUS In Port (Supports Signal Redundancy) Over-The-Air (OTA) FW Update
- Compatibility: Tandem series radio & TD protocol capable RF module Dual XT30 Power Input Connector Triple Antenna Design (2×2.4G & 1×900M antennas)
- Built-in High-Precision Telemetry Sensor (Altitude, Vertical Speed, etc.) Basic Black-Box Data Record Function Built-in Power Switch Function | Match with Different External Switches (Optional)
- 4ms Race Mode with Telemetry Long Control Range (Range varies based on the RF Power settings.) 12 Configurable Channel Ports – CP1: PWM / SBUS Out / FBUS / S.Port / SBUS In (Redundancy Func.) – CP2-12: PWM / SBUS Out / FBUS / S.Port
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
FrSkyFrSky 2.4Ghz 900Mhz TDSR10 receivers
Main highlights- The configurable 10 channel ports are a big feature of TD SR10, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. With the FBUS protocol, the TD receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the build setup.
- The classical stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes like Stabilization, Auto-Level, Hover, and Knife-Edge with an airplane model.
- The Tandem series receivers adopt the triple antenna design that provides multi-directional wide coverage for the remote signal. The data (Power & Signal related) under unusual status during the flight can be recorded by Tandem receivers through a built-in black box module.
- The Tandem dual-band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 2.4Ghz and 900Mhz frequencies. That means Tandem receivers provide not only the low latency signal and long-range control but also benefit from the enhanced level of high reliability and anti-interference performance.
- In the advanced stabilization mode, all the output pins are configurable for stabilization and additional advanced features such as Stab file sharing, programmable parameters, developer access, etc. The advanced stabilizer feature incorporates high-precision telemetry sensors to monitor altitude, vertical speed, etc. This ADV feature is an additional benefit compared to using a regular S series stabilization receiver.
- ADV Stabilizer The TD SR10 offers an ADV Stabilizer function which is an upgrade over the original classical gyroscope stabilization modes. The ADV Stabilizer offers an advanced mode that provides more programmable stabilized channels and flexibility.
9.8Exceptional
View offer on:
Show more
3
FrSkyFrSky Taranis Receiver X8R 8 Channel 2.4ghz ACCST&RSSI&SBUS
Main highlights- With RSSI PWM output (0~3.3V)
- SmartPort enabled, realizing two-way full duplex transmission.
- Parallel two X8R to become a 16 channel receiver.
- More number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port,or combine two X8R to become a 16 channels receiver.
- All 16 channels requires the FrSky Taranis, or the XJT module bound in D16 mode. For 8 channels in D8 Mode you can use the FrSky Taranis or XJT, DJT, DFT, DHT and DHT-U modules.
9.6Exceptional
View offer on:
Show more
4
COOL RACING2.4GHz 16CH Mini RC Receiver Compatible with FRSKY XSR, XJT and X9D, X9DP, X9E, X12S in D16 Mode Compatible Open TX FRSKY D16
Main highlights- Suitable for FRSKY X9D, X9DP, X9E, X12S etc. D16 supported remote control
- High quality PA to ensure high receiving sensitivity;
- Dual-antenna design, available to mount in different angle to increase the reception reliability;
- Dual serial signal S-BUS/PPM (8CH) output, connect directly to flight control system, especially for mini multirotor and aircraft to save mounting space; RSSI(PWM) output, available to detect the signal changes of the radio control via receiver.
- Compatible OPEN TX FRSKY D16 remote control system
9.4Excellent
View offer on:
Show more
5
FrSkyFrSky R9 SX Enhanced R9 Series Access OTA Long Range Receivers
Main highlights- Switchable CH5/CH6 into S.Port/SBUS Output channels Support S.Port / F.Port (Configurable in OpenTX / FrOS menu)
- Signal redundancy function External battery detection Detachable Ipex1 connector antenna
- Enhanced and durable design 6 standard servo connectors (default PWM channel)
- Compatibility: R9M Lite/ R9M Lite Pro / R9M 2019 with ACCESS firmware
- ACCESS protocol and supports OTA functions 900MHz/868MHz long-range with low latency
9.3Excellent
View offer on:
Show more
6
FrSkyFrSky Archer Plus R6 Receiver
Main highlights- The Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to the receivers with anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function, some basic flight data (like Power & Signal related) can be well preserved.
- The Archer Plus R6 6 high-precision PWM channel receivers are ideal for any type of glider pilot, it supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range. The R6 can be used as a Primary receiver in a redundant solution by wiring the SBUS In port and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup.
- Number of Channels: 6/24 channels 6 High-precision PWM & 16 SBUS channels Mode 6 High-precision PWM & 24 SBUS channels Mode Operating Voltage Range: 5 -10V Operating Current: ＜65mA@5V Operating Range: ＞2km (Full range)(*Range may vary based on local conditions.) Voltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10) Antenna connector: IPEX4 Compatibility: FrSky 2.4GHz ACCESS / ACCST D16 capable transmitters
- Enhanced Anti RF-Interference capability with more solid RF performance Smart-matched ACCESS & ACCST D16 modes Supports basic Black-Box function 6 high-precision PWM channel ports SBUS Out port（Supports 16ＣＨ／24CH mode） Supports signal redundancy (SBUS In) Full control range with telemetry (S.Port or FBUS) Over-The-Air (OTA) FW update External battery/device voltage detection
9.2Excellent
View offer on:
Show more
7
FrSkyFrSky TD SR6 Receiver
Main highlights- TD SR6 receiver offers 6 PWM channel outputs and is bundled in a compact lightweight design, the receiver also provides output pins accordingly for SBUS Out and FBUS/S.Port. By setting the S.Port to the FBUS protocol, the TD receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the build setup.
- Stabilization Function The TD SR6 offers an enhanced Stabilization function which is an upgrade over the original classical gyroscope stabilization modes. The TD SR6 offers an advanced mode that provides more programmable stabilized channels and flexibility. The classical stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes like Stabilization, Auto-Level, Hover, and Knife-Edge with an airplane model.
- Simultaneous working 2.4G&900M dual-band TD mode Dual-band antenna design for multi-directional coverage Compact lightweight design Built-in Stabilization Function Black Box function 4ms race mode with telemetry Long control range (Range varies based on the RF Power settings.) Over-The-Air (OTA) FW update 6 PWM channel ports FBUS / S.Port SBUS Out (Supports 16CH / 24CH mode)
- In the advanced stabilization mode, all the output pins are configurable for stabilization and additional advanced features such as Stab file sharing, programmable parameters, developer access, etc.
- Frequency: 2.4GHz & 900MHz Dimension: 47.5×20.4×10.9mm (L*W*H) Weight: 11.5g Operating Voltage: 3.5-10V (recommend 3.7-8.4V) Operating Current: ≤110mA@5V Compatibility: TANDEM series radio & RF module in TD mode. 2.4G/900M antenna connector: IPEX1 Voltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)
9.1Excellent
View offer on:
Show more
8
FrSkyFrSky 2.4G 900M Tandem Receiver TD R6 Receiver with 6 Channel Ports
Main highlights- The Tandem series receivers adopt a dual-band antenna design (2.4GHz & 900MHz) that provides multi-directional wide coverage for the remote signal. The telemetry data (Power & Signal related) can be recorded using the built-in black box module within the Tandem receiver, useful for capturing data from any unusual status during the flight.
- TD R6 receiver offers 6 PWM channel outputs and is bundled in a compact lightweight design, the receiver also provides two 3-pin ports accordingly for SBUS Out and FBUS/S.Port. By setting the S.Port to the FBUS protocol, the TD receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the build setup.
- Simultaneous working 2.4G&900M dual-band TD mode Dual-band antenna design for multi-directional coverage Compact lightweight design Black Box function 4ms race mode with telemetry
- Long control range (up to 50KM – 100KM) Over-The-Air (OTA) FW update 6 PWM channel ports FBUS / S.Port SBUS Out (Supports 16CH / 24CH mode)
- Frequency: 2.4GHz & 900MHz Dimension: 47.5*20.4*10.9mm (L*W*H) Weight: 11.5g Operating Voltage: 3.5-10V(recommend 3.7-8.4V) Operating Current: ≤110mA@5V
- Compatibility: TANDEM series radio & RF module in TD mode. 2.4G/900M antenna connector: IPEX1
8.9Very Good
View offer on:
Show more
9
FrSkyFrSky TW GR6 Receiver
Main highlights- Simultaneous working dual 2.4G TW mode High-precision variometer sensor Black-Box function 4ms race mode with telemetry Long control range (Range varies based on the RF Power settings.)
- Over-The-Air (OTA) FW update 6 PWM channel ports SBUS Out (Supports 16CH / 24CH mode) FBUS / S.Port Inverted S.Port
- Antenna connector: IPEX4 Compatibility: TWIN series Radio & RF module in TW mode.
8.8Very Good
View offer on:
Show more
10
FrSkyFrSky Archer Plus R10+ Receiver
Main highlights- With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup. This receiver also supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range.
- The R10+ receivers have 10 configurable channel ports, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. The R10+ can be used as a Primary receiver in a redundant solution by setting a port as SBUS In and connecting to any other FrSky receiver equipped with an SBUS Out port.
- Full control range with telemetry (S.Port or FBUS) ● Anti-interference capability in the spark-ignition process ● Over-The-Air (OTA) FW update ● External battery/device voltage detection
- Enhanced Anti RF-Interference capability with more solid RF performance ● Smart-matched ACCESS & ACCST D16 modes ● Supports basic Black-Box function (Available later by updating the FW.) ● 10 configurable channel ports (PWM, SBUS, FBUS, or S.Port) ● Supports signal redundancy (SBUS In)
- Control Range: Full range* with telemetry (*Full Range: ＞2km, the range may vary based on local conditions.)Compatibility: FrSky 2.4GHz ACCESS / ACCST D16 capable transmitters
- 10 Configurable Channel Ports CP1: PWM / SBUS Out / FBUS / S.Port / SBUS In CP2-10: PWM / SBUS Out / FBUS / S.Port ●SBUS Out (Supports 16CH / 24CH mode)
8.7Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for frsky r xsr receiver
