Frsky Long Range Receivers of 2025
Best Choice1
Clicked 12 times in the last monthFrSkyFrSky TD SR12 Receiver 2.4Ghz 900Mhz Long Range Telemetry ADV Stabilizer Function
Main highlights- Simultaneous Working Dual-Band (900M/2.4G) TD Mode Dual Power Balancing Consumption Built-in Advanced Stabilization Functions
- Operating Current: ≤170mA Continuous Current: ≤20A (power the device) | Instaneous Current: ≤40A (power the device) Voltage Measurement Range via AIN (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)
- Frequency: 900MHz & 2.4GHz Dimension: 48.5*33*17.9mm (L*W*H) Weight: 23g Operating Voltage: 3.5-10V (Recommend 2S Li Batteries)
- FBUS / S.Port SBUS Out Port (Supports 16CH / 24CH mode) SBUS In Port (Supports Signal Redundancy) Over-The-Air (OTA) FW Update
- Compatibility: Tandem series radio & TD protocol capable RF module Dual XT30 Power Input Connector Triple Antenna Design (2×2.4G & 1×900M antennas)
- Built-in High-Precision Telemetry Sensor (Altitude, Vertical Speed, etc.) Basic Black-Box Data Record Function Built-in Power Switch Function | Match with Different External Switches (Optional)
- 4ms Race Mode with Telemetry Long Control Range (Range varies based on the RF Power settings.) 12 Configurable Channel Ports – CP1: PWM / SBUS Out / FBUS / S.Port / SBUS In (Redundancy Func.) – CP2-12: PWM / SBUS Out / FBUS / S.Port
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
FrSkyFrSky TD SR6 Receiver
Main highlights- TD SR6 receiver offers 6 PWM channel outputs and is bundled in a compact lightweight design, the receiver also provides output pins accordingly for SBUS Out and FBUS/S.Port. By setting the S.Port to the FBUS protocol, the TD receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the build setup.
- Stabilization Function The TD SR6 offers an enhanced Stabilization function which is an upgrade over the original classical gyroscope stabilization modes. The TD SR6 offers an advanced mode that provides more programmable stabilized channels and flexibility. The classical stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes like Stabilization, Auto-Level, Hover, and Knife-Edge with an airplane model.
- Simultaneous working 2.4G&900M dual-band TD mode Dual-band antenna design for multi-directional coverage Compact lightweight design Built-in Stabilization Function Black Box function 4ms race mode with telemetry Long control range (Range varies based on the RF Power settings.) Over-The-Air (OTA) FW update 6 PWM channel ports FBUS / S.Port SBUS Out (Supports 16CH / 24CH mode)
- In the advanced stabilization mode, all the output pins are configurable for stabilization and additional advanced features such as Stab file sharing, programmable parameters, developer access, etc.
- Frequency: 2.4GHz & 900MHz Dimension: 47.5×20.4×10.9mm (L*W*H) Weight: 11.5g Operating Voltage: 3.5-10V (recommend 3.7-8.4V) Operating Current: ≤110mA@5V Compatibility: TANDEM series radio & RF module in TD mode. 2.4G/900M antenna connector: IPEX1 Voltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)
9.8Exceptional
View offer on:
Show more
3
FrSkyFrSky TD R10 Triple Antenna Compatible with 900Mhz and 2.4Ghz 10 Channel Low Latency Signal and Long-Range Receiver
Main highlights- Supply current range（every single port） ◦ Instantaneous current:5A ◦ Continuous current:3A 10 Configurable Channel Ports ◦ CP1: PWM / SBUS Out / FBUS / S.Port / SBUS In ◦ CP2-10: PWM / SBUS Out / FBUS / S.Port
- Simultaneous working dual-band TD mode Triple antenna design for multi-directional coverage Black Box function Built-in voltage sensor
- Frequency: 2.4GHz & 900MHz Dimension: 46.5*26.3*14.7mm (L*W*H) Weight: 16.6g Operating Voltage: 3.5-10v DC Operating Current: ≤180mA@5V
- Compatibility: Tandem series transmitter & TD protocol capable RF module Triple 2.4G/900M Antenna ◦ 2* External 2.4G antenna (IPEX1) ◦ 1* External 900M antenna (IPEX1)
- 4ms Race Mode with Telemetry Long control range (up to 50KM – 100KM) Over-The-Air (OTA) FW update
9.7Exceptional
View offer on:
Show more
4
FrSkyFrSky 2.4G 900M Tandem Dual Band Receiver TD MX Receiver
Main highlights- Triple 2.4G/900M Antenna – 2* External 2.4G antenna (IPEX1) – 1* Newly designed 900M antenna
- Simultaneous working dual-band TD mode Triple antenna design for multi-directional coverage
- Over-The-Air (OTA) FW update 4 PWM channels S.Port & Inverted S.Port FBUS / SBUS Out / SBUS In (Redundancy Func.)
- Frequency: 2.4GHz & 900MHz Compatibility: Tandem series radio & TD protocol capable RF module
- Black Box function 4ms Race Mode with Telemetry Long control range (up to 50KM – 100KM)
9.6Exceptional
View offer on:
Show more
5
FrSkyFrSky Taranis Receiver X8R 8 Channel 2.4ghz ACCST&RSSI&SBUS
Main highlights- With RSSI PWM output (0~3.3V)
- SmartPort enabled, realizing two-way full duplex transmission.
- Parallel two X8R to become a 16 channel receiver.
- More number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port,or combine two X8R to become a 16 channels receiver.
- All 16 channels requires the FrSky Taranis, or the XJT module bound in D16 mode. For 8 channels in D8 Mode you can use the FrSky Taranis or XJT, DJT, DFT, DHT and DHT-U modules.
9.4Excellent
View offer on:
Show more
6
FrSkyFrSky Access 900MHz Long Range R9 Slim+ OTA Receiver
Main highlights- With inverted SBUS and S.Port outputs
- Low latency and high precision
- Detachable Ipex1 connector antenna
- Battery voltage detection supported
- ACCESS Protocol and support OTA functions
9.3Excellent
View offer on:
Show more
7
FrSkyFrSky 900MHz R9M 2019 Long Range Module System Compatible R9 Series (ACCST/Access)
Main highlights- ● Telemetry mode（25mW）/non-telemetry mode（200mW / 500mW） (LBT Version)
- ● Smart Port enabled and support telemetry data transmission Telemetry Interface: Smart Port Upgrade Interface: Smart Port
- ● Long range, low latency and high precision RC system Vin Voltage Range: 6.5V~13V
- ● 900MHz/868MHz working mode Compatibility: R9 series (ACCST/ACCESS)
- ● 4 Optional RF power (Non-LBT Version) Vin Voltage Range: 6.5V~13V
9.2Excellent
View offer on:
Show more
8
FrSkyFrSky 2.4G 900M Tandem Receiver TD R6 Receiver with 6 Channel Ports
Main highlights- The Tandem series receivers adopt a dual-band antenna design (2.4GHz & 900MHz) that provides multi-directional wide coverage for the remote signal. The telemetry data (Power & Signal related) can be recorded using the built-in black box module within the Tandem receiver, useful for capturing data from any unusual status during the flight.
- TD R6 receiver offers 6 PWM channel outputs and is bundled in a compact lightweight design, the receiver also provides two 3-pin ports accordingly for SBUS Out and FBUS/S.Port. By setting the S.Port to the FBUS protocol, the TD receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the build setup.
- Simultaneous working 2.4G&900M dual-band TD mode Dual-band antenna design for multi-directional coverage Compact lightweight design Black Box function 4ms race mode with telemetry
- Long control range (up to 50KM – 100KM) Over-The-Air (OTA) FW update 6 PWM channel ports FBUS / S.Port SBUS Out (Supports 16CH / 24CH mode)
- Frequency: 2.4GHz & 900MHz Dimension: 47.5*20.4*10.9mm (L*W*H) Weight: 11.5g Operating Voltage: 3.5-10V(recommend 3.7-8.4V) Operating Current: ≤110mA@5V
- Compatibility: TANDEM series radio & RF module in TD mode. 2.4G/900M antenna connector: IPEX1
9.0Excellent
View offer on:
Show more
9
FrSkyFrSky Archer Plus R6 Receiver
Main highlights- The Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to the receivers with anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function, some basic flight data (like Power & Signal related) can be well preserved.
- The Archer Plus R6 6 high-precision PWM channel receivers are ideal for any type of glider pilot, it supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range. The R6 can be used as a Primary receiver in a redundant solution by wiring the SBUS In port and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup.
- Number of Channels: 6/24 channels 6 High-precision PWM & 16 SBUS channels Mode 6 High-precision PWM & 24 SBUS channels Mode Operating Voltage Range: 5 -10V Operating Current: ＜65mA@5V Operating Range: ＞2km (Full range)(*Range may vary based on local conditions.) Voltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10) Antenna connector: IPEX4 Compatibility: FrSky 2.4GHz ACCESS / ACCST D16 capable transmitters
- Enhanced Anti RF-Interference capability with more solid RF performance Smart-matched ACCESS & ACCST D16 modes Supports basic Black-Box function 6 high-precision PWM channel ports SBUS Out port（Supports 16ＣＨ／24CH mode） Supports signal redundancy (SBUS In) Full control range with telemetry (S.Port or FBUS) Over-The-Air (OTA) FW update External battery/device voltage detection
8.9Very Good
View offer on:
Show more
10
FrSkyFrSky Archer Plus SR10+ Receiver
Main highlights- ● Over-The-Air (OTA) FW update ● External battery/device voltage detection●Compatibility: FrSky 2.4GHz ACCESS / ACCST D16 capable transmitters
- With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup.
- The SR10+ supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range. The SR10+ can be used as a Primary receiver in a redundant solution by setting a port as SBUS In and connecting to any other FrSky receiver equipped with an SBUS Out port.
- The Archer Plus SR10+ are gyro-stabilized receivers with a built-in 3-axis gyroscope and 3-axis accelerometer and feature multiple flight modes (Auto-level, Stabilization, Knife-Edge, etc.) and configuration methods. The SR10+ receivers have 10 configurable channel ports, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port.
- Enhanced Anti RF-Interference capability with more solid RF performance ● Smart-matched ACCESS & ACCST D16 modes ● Supports basic Black-Box function (Available later by updating the FW.) ● Built-in 3-axis gyroscope and 3-axis accelerometer sensor ● Multiple flight modes and configuration tools (ETHOS, LUA scripts, etc.) ● 10 configurable channel ports (PWM, SBUS, FBUS, or S.Port) ● Supports signal redundancy (SBUS In) ● Full control range with telemetry (S.Port or FBUS) ● Anti-interference capability in the spark-ignition process
8.7Very Good
View offer on:
Show more
Similar products on Amazon
