10 Best Frequency Driver Inverter Vfd In The Us - Black Friday 2024
Best Choice1
ATOATO 5hp 480V Three Phase VFD, 3 Phase 480V VFD Variable Frequency Drive, 3 Phase 480V Input 3 Phase AC 0~480V Output VFD Drive Inverter, IP20 Enclosure RS485 Enabled(5hp 3.7kW, 3 Phase Input Output)
Main highlights- Parameters---Input Voltage:3 phase 480V AC ±15%, Input frequency: 50Hz/ 60Hz ; Output voltage: 3 phase AC 0~input voltage, Output frequency: 0.00~400.00Hz
- Fault Protection Function---5hp 3 phase input output VFD, with up to 30 fault protections including over-current, can record the detailed running status during failure & has fault automatic reset function
- Customer First---If you are not sure about the spec or have any issue about the product or service, please don't hesitate to email us. We will answer you with 12h
- Application---480V three phase output VFD, Widely use in spindle motor, drill press, cnc, hvac, lathe, milling, pumps, conveyors, fan,cooling, compressor, three-phase motor and other machines
- Advantages---The ATO three phase VFD can limit current & voltage automatically during the running process, prevent frequent over-current & over-voltage tripping
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
CNCTOPBAOSCNCTOPBAOS 2.2KW Water Cooled Spindle Motor ER20 24000rpm 400Hz+2.2KW VFD Inverter Variable Frequency Driver 110V+80mm Clamp+80W Pump+6m Pipe+14pcs Collet CNC Kit for CNC Router Milling Machine
Main highlights- Wiring: Spindle's pin 1=U; Spindle's pin 2=V; Spindle's pin 3=W; Spindle's pin 4=Ground; Pls connect the 110V AC power supply input wires to the R & T terminals; All parameters of VFD are pre-set before leaving the factory and can run the spindle
- Specifications of VFD: Power: 2.2KW; Input Voltage: 110V+/-15% ; Output Voltage 100V-120V AC; Input Frequency: 48-63Hz; Output Frequency: 0-400Hz; Input Phase: Single phase; Output Phase:Three phase; Output Current: 20A
- Specifications of Spindle: Power: 2.2KW; Water-cooling; Speed:0-24000rpm; Frequency:400Hz; Voltage:110V; Accuracy:0.003-0.005; Collet: ER20; Bearings: Four; Net Weight: 5.2 kg/11.46 LB; Lubrication:Grease; Current:8.5A; Size:80x200 mm
- Pump: 80W strong power; Pump Length: 3.5m; Voltage:105-125VAC with US plug; Flow:3500L/H; Size:153x88x108mm; Water nozzle diameter:8mm; Rubber suction cups can be a good fit in the glass surface, to help keep it stability; Pipe Length: 6M
- Clamp: Dia is 80mm; Material: Cast Aluminum; With three installation screws; 14Pcs ER20 collet: Full set including 1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm each 1pcs;Run-out tolerance 0.1mm;First class 1065 carbon steel
9.6Exceptional
View offer on:
Show more
3
CNCTOPBAOSCNCTOPBAOS 4KW 220V VFD Inverter Variable Frequency Drive Converter Driver Controller 5HP 3-Phase Output 18A VSD with 2m Cable for Spindle Motor Drive Control/CNC Router Engraving Milling Machine
Main highlights- Model: HY04D023B; Power: 4KW; Horsepower: 5HP; Input: AC 220V+/-15%; 1 phase or 3 phase,if you use single-phase input,pls just connect the input wire to the R and S these two terminals; Output: 3 phase 220V+/-15%; Output Current:18A
- Input frequency: 0-50Hz or 0-60 Hz; Output frequency: 0-400Hz; VFD Dimension: 5.98x6.88x8.66 inch/152x175x220 mm;Weight: 5 LB / 2.3 KG; With 2m extension cable: Comes with a 2m extension cable/control panel box
- Functions: With overload, overvoltage, lowvoltage ,restarted by frequency track after instantaneous stop, electronic circuit, overheat, running, direct start after power on, fault reset, parameter lock PID etc
- Features: A potentiometer can be used to adjust to the speed you want.;Advanced calculus PID closed-loop arithmetic;Easy PLC function can realize 16 legs of speed and control function;With a DC cooling fan;Supports mach3 function and RS-485 communication
- Applications: 3 phase 220V AC spindle motor,CNC Router,CNC machine,milling machine,drilling machine,wingding machine, extruder, slitter, mixer, winder, compressor,ventilator,pump grinder, conveyor, elevator, centrifuger and other speed control machines
9.4Excellent
View offer on:
Show more
4
Mollom10% OffMOLLOM VFD 220V 7.5KW 32A 10HP Single or Three Phase Input to 3 Phase 0-3000 Hz Output Variable Frequency Drive Control Inverter for Spindle Motor CNC Speed Control
Main highlights- 【Smart Digital Display】 Adopting user-friendly keyboard design & reasonable layout, easy to operate; digital display, intuitive and clear. The detachable design is convenient for remote control
- 【Importent Note】 This VFD surpport external resistor. If your motor is heavy load, pls choose a higher power level VFD or contact sales for model selection suggestion.**The working environment is relatively humid, with water mist, water droplets or metal objects falling in, which will cause a short circuit
- 【High Performance】Power: 7.5kw; Input voltage: AC 220V(±15%); Output voltage: AC 220V; Maximum output current:32A; Input frequency: 50/60 Hz; Output frequency: 0-3000 Hz; Input phase: Both Support Single or Three phase; Output phase: three-phase.VFD Dimension: 5.9 x 7.3 x 10.2 inch (L x W x H)
- 【Feature】Rich of digital and analogy control terminals for versitile control ，RS485 communication port, adopting standard international MODBUS main circuit control.With extremely strong anti-jamming capability, safe for you to use
- 【Application Motor】CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines
9.3Excellent
View offer on:
Show more
5
HY HUANYANGHY HUANYANG Variable Frequency Drive VFD Vector Single to 3 Phase Converter, for Motor Speed Control,220VAC Input/Output (GT Series 7.5KW-10HP Model)
8.9 Tech Support8.0 worth the moneyWhy we love it
High performance stability
Multi protection features
Low noise EMI
9.2Excellent
View offer on:
Show more
6
QNKQNK 5.5KW 7.5HP 220V AC 25A VFD Converter Single to 3 Phase Inverter Variable Frequency Drive for CNC Spindle Motor Speed Controller
Main highlights- 【Wide Application】The VFD can be used in various types of equipment such as Spindle Motors, CNC Routers, Milling Machines, Pumps, Compressors, Grinders, among others.
- 【V/F Control & Vector Control】 The VFD frequency setting mode includes digital setting, analog setting, serial communication setting (RS485 communication port, adopting standard international MODBUS main circuit control), PID setting (advanced calculus PID closed-loop arithmetic, quick responding speed, and high suitability), etc.
- 【Low-Noise Operation & Low Electromagnetic Interference】The PMW control technology and a component compatibility design allow this VFD for low-noise operation and low electromagnetic interference.
- 【Improved Safety & Durability】QNK VFD features protective functions for overload, fuse, over voltage (DC voltage>400V) or under voltage (DC voltage<200V), restart, stall, short circuit, and overheat. Moreover, it comes with copper coil internals and a nonflammable exterior for durability and a multi-grid design with enough cooling space between the electronic components and the case for fast heat dissipation.
- 【Customer Service】Welcome to contact us if you have any questions of this product. Customer Support Team will help you as soon as we can in 24h.
- 【Attention】Please Note: 1.The VFD can’t be used as a power source for other equipment, or to drive a motor with a supply voltage lower than 80V. 2.Do not connect the VFD’s output terminals with capacitive loads.3.Choose a VFD with a larger power output when operating heavy equipment like the crane and compressor, e.g.,a 5.5 Kw motor should be connected to a 7.5 Kw VFD. 4.If a generator is used to power the VFD, ensure that the generator's output voltage level is within +/-15%.
- 【5.5KW (7.5HP) Variable Frequency Drive】Input: 1-phase/3-phase 220 VAC (+/- 15%), 0- 25 A, and 50/60 Hz. Output: 3-phase 220 VAC, 0-25A, and 0-1,000 Hz. Dimensions (L x W x H): 8.6 x 4.6 x 5.8 inches.
9.1Excellent
View offer on:
Show more
7
Wisoqu16% OffWisoqu VFD Variable Frequency Drive,Single‑Phase 110VAC Input 3‑Phase 220VAC Output Variable Frequency Inverter,Motor Speed Controller,220V 1500W AT5‑1500X, default
Main highlights- and Reliable: Made of high‑quality plastic material, and impact resistance, and has good safety.
- With a Digital Display: The speed governor is equipped with a digital display, with clear readings and convenient parameter setting.
- Wattage: 1500.0
- Usage: The variable frequency inverter is suitable for 3‑phase motor speed regulation, lighting adjustment, power cooling, etc.
- Premium Performance: The frequency converter is used to adjust the speed of the motor and has the characteristics of high torsion and wide speed regulation.
- Output wattage: 1500.0
- Great : With of over current, over voltage and under voltage, module failure, over heat, short circuit, etc., and provide low electromagnetic interference
9.0Excellent
View offer on:
Show more
8
HY HUANYANG14% OffHuanyang VFD,Single to 3 Phase,Variable Frequency Drive,2.2kW 3HP 220V Input AC 10A for Motor Speed Control,HY Series
Main highlights- 【Warranty】: 1 Year replace .If there is an error code in the product and you do not know how to operate, please contact the seller
- 【Good Noise Control】The VFD has the advantages of low noise and low electromagnetic interference, which are achieved by the excellent PMW control technology and component compatibility design. There is enough space for cooling between each component, and the product casing is designed with multiple holes, the above features can make this VFD have a longer service life.
- 【Feature-rich】Supports mcah3 function and RS-485 communication.Supports remote potentiometer speed control and remote switch start/stop
- 【Easy to connect】The single phase input wire is connected to the “R“ and ”S” terminal on the VFD, and the motor output wire is connected to the "U","V"and"W" terminal
- 【Basic function】This VFD can run 3-phase motor with 200-230V AC single-phase or three phase power supply
- 【Application Motor】CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines
8.8Very Good
View offer on:
Show more
9
HY HUANYANGHY HUANYANG VFD Converter,Variable Frequency Drive,Single Phase 110v Input, (for Power ≤3HP Three-Phase Motor/Spindle) 0-400hz Speed Rotation (HY Series-110v 2.2kW 3HP Model)
Main highlights- 【Warranty】: 1 Year replace .If there is an error code in the product and you do not know how to operate, please contact the seller
- 【Good Noise Control】The VFD has the advantages of low noise and low electromagnetic interference, which are achieved by the excellent PMW control technology and component compatibility design. There is enough space for cooling between each component, and the product casing is designed with multiple holes, the above features can make this VFD have a longer service life.
- 【Feature-rich】Supports mcah3 function and RS-485 communication.Supports remote potentiometer speed control and remote switch start/stop
- 【Easy to connect】The input wire is connected to the “R“ and ”S” terminal on the VFD, and the output wire is connected to the "U","V"and"W" terminal
- 【Basic function】This VFD can run 3-phase motor with 110v single-phase power supply (not for single phase motor)
- 【Application Motor】CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines
8.7Very Good
View offer on:
Show more
10
RATTMMOTORRATTMMOTOR Variable Frequency Drive 2.2KW 110V VFD Drive Inverter Frequency Converter Single Phase Input, 3 Phase Output for VFD Water-cooled Air-cooled Spindle Motor Speed Control+VFD Extension Cable
Main highlights- 【Technical Parameters】- Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 110V 0-50Hz/60Hz. Output：3phase 110V 0-400Hz. Communication Control: RS-485. Vibration: below 0.5G. Operation Temperature: -10 ～40℃. Five-Digits Display and Status Indicator Lamp display frequency, current, revolution, voltage, counter, temperature, foward or reverse running, fault, ect.
- 【Multi-Protection Functions】Including overload protection, FUSE broken-motor stops protection, over-voltage / low-voltage protection, restarted by frequency track after instantaneous stop, anti-stall during acceleration/deceleration operation, electronic circuit protection. And many other protection functions, such as over-heat protection, restriction of reverse running, direct start after power on, fault reset, parameter lock PID, one-drive-more, ect.
- 【Installation/use environment】In order to make the cooling effect, the frequency converter must be installed vertically and ensure that the air is flowing smoothly. Before installing and using the product, please read the instruction manual (included in the package) of the inverter carefully to give full play to its functions and ensure safety.
- 【Input/Output Terminals】- 6 Multi-function input terminals can implement 8 speed control, program operation, 4 segment reduction switching, UP/DOWN functions, counter, external emergency stop function. There are 5 multi-function output terminals for displaying running, zero speed, counter, external abnormity, program operation and other information and warnings.
- 【General Control】- In addition to 4 segment reduction time (0.1-6500 seconds) can be arbitrarily selected, not only can set a V / F curve, but also set torque, up to 10.0% start torque can reach 150%. There are also other functions, like an automatic voltage regulator (AVR), deceleration stop or free stop, DC brake, automatic reset reset, frequency tracking, PLC program control, transverse control, carrier adjustable by max 20kHz, ect.
8.6Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for frequency driver inverter vfd
