10 Best Flysky Ftr8b In The Us - Black Friday 2024
Flysky FS-ST8 2.4GHz 10CH Radio Transmitter ANT RGB Assistant 3.0 with SR8 Receiver for RC Drone Airplane Car Boat (FS-ST8 Upgraded Version with Two FS-SR8 Receiver)
Main highlights- User-friendly Ergonomical Design Flexible joystick, sturdy button material, large display screen, and smooth scroll wheel are very suitable for flexible response when operating the model.Size is 6.93*8.3*3.25 inches,weight: 0.93 lbs, it can be held very easily.
- This RC Transmitter and Receiver uses the 2.4 GHz ANT (Ant Protocol) automatic frequency hopping digital system, consisting of FS-ST8 transmitter and FS-SR8 receiver. It has an output of 8-10 channels, can be used for model fixed-wing aircraft,delta-wing airplanes, helicopters, gliders, multicopters, engineering vehicles, robots, etc. Long range control up to 0.62 miles (1 km)Distance (Air distance without interference. )
- MIXES Function MIXES setting is enabled for some models that require two channels to act in linkage. For example you can perform rudder compensation so that the aircraft will not lift its nose when throttling up. This transmitter provides up to 8 groups of Mixes
- FAILSAFE settings --Failsafe is an important safety setting. It can be used to protect the model from loss or reduce the degree of loss when the receiver loses signal without control. In addition, it plays a role in protecting personnel safety.You can set the data in case of loss of control for all output channels.
- Exquisite Craft Design Flexible operating rods, sturdy buttons, large LCD screen, high -quality materials composition enhance more technology experience,not only for flexible sense, but also can maintain the natural smooth feeling of operation. This RC Transmitter and Receiver is great assistant for flight model lovers!
- Curious about how we select the top products for you? Explore How It Works
Flysky FS-ST8 2.4GHz 10CH ANT RGB Assistant 3.0 Radio Transmitter with SR8 Receiver for RC Drone Airplane Car Boat (Standard Version)
Main highlights- remote radio system using high gain and high quality multidirectional antenna, reserved external antenna hole, can upgrade the external antenna independently, it covers the entire frequency band, can reduce interference while using less power and maintain a strong and reliable connection.
- ith lightweight and portable size, it is easy and convenient to carry and use.
- The remote radio system is built with high-sensitivity receiver chip and low-power components, thus reducing more power consumption. 4 x 1300 mAh AA NiMH batteries can last for more than 10 hours, which can extend the battery life.
- FLYSKY FS-ST8 is the default 10CH and FS-SR receiver, CEV04 enables channel expansion for 8-10 channels and supports FS-CGSO1 GPS module.
- External antenna modifications, upgradable strong signal antenna, able to send and receive data, can be paired with a 3-segment audio coach port, able to receive data from temperature, altitude and many other types of sensors.
8 channel receiver,HUIOP FTr8B 2.4GHz 8CH Receiver for RC Airplane Helicopter Fixed Wing Glider Engineering Vehicle Drone Dual Antenna PWM/PPM/i.BUS/S.BUS Output Compatible with AFHDS3 Transmitters RF
Main highlights- With compact size and light-weight,no worry to give any burden to your RC model.
- Warranty: If there are any problems,please contact our store in time. We will give you a satisfactory solution.
- This product can be equipped with RC such as fixed wing,glider,helicopter,delta wing engineering vehicle etc.
- The FTr8B receiver is compatible with all AFHDS 3 transmitters and RF modules (including PL18,NB4,NB4 Lite,FRM302 etc.)
- Adopting the third automatic frequency hopping digital system (AFHDS 3),the FTr8B receiver is provided with dual antennas,bidirectional data transmission and support i-bus out/ s.bus switch and CH1 interface PWM/PPM switch.
Flysky FGR8B IPX4 2.4GHz 8CH PWM PPM i-bus Output Receiver for AFHDS 3 Transmitters RF Modules PL18 NB4 /NB4 Lite FRM302 RC Car Boat
Main highlights- Ultra-small size and ultra-lightweight, effectively save space and reduce item's weight-bearing.
- The FGr8B receiver adopts Flysky's third-generation automatic frequency hopping digital system (AFHDS 3).
- It uses a single-antenna bidirectional transmission system and is uniquely designed to install and output PWM/ PPM/ i-bus in signals.
- It supports all AFHDS3 transmitter and RF modules
- Easy to bind and very fast link-up, quick and extremely stable in performance.
Flysky FGR8B IPX4 2.4GHz 8CH Receiver PWM PPM i-Bus Output for AFHDS3 Transmitters RF Modules PL18 NB4 /NB4 Lite FRM302 RC Boat
Main highlights- The FGr8B receiver is suitable for RC models such as boats and cars.
- PWM Channels: 7(Version 2.0 will be upgraded to 8 channels))
- It uses a single-antenna bidirectional transmission system and is uniquely designed to install and output PWM/PPM/i-bus in signals. With a compact size and light-weight, no worry to give any burden to your RC Model.
- Flysky FGR8B IPX4 2.4GHz 8CH Receiver PWM PPM i-bus Output for AFHDS3 Transmitters RF Modules PL18 NB4 /NB4 Lite FRM302 RC Boat
- Adaptive transmitter: all transmitter supporting AFHDS3 (PL18, NB4, NB4 Lite, etc.)
HTLNUZD Flysky FTr8B 2.4GHz Remote Control Receiver Dual Antenna, 8CH PWM/PPM/i.Bus/S.Bus Output Compatible AFHDS 3 RF Modules for PL18 NB4 NB4 Lite Transmitter RC Glider Vehicles
Main highlights- 【Model Type】can be equipped with RC toy such as fixed wing, glider, helicopter, delta wing engineering vehicle etc.
- 【High configuration】with dual antennas, bidirectional data transmission,PWM/ 8 Channels,CH1 interface support i-bus out/PPM/i.BUS out/S.BUS.
- 【FTr8B receiver is compatible】all AFHDS 3 transmitters and RF modules (including PL18, NB4, NB4 Lite, FRM302 etc).
- 【Easy to carry】With compact size and light-weight, no worry to give any burden to your RC model.
- 【2.4G Protocol】Adopting Flysky the third generation automatic frequency hopping digital system (AFHDS 3).
FEICHAO Flysky FS-iBA01 FS-iBT01 FS-iBS01 Enhanced Receiver Altitude Sensor for i-BUS2 Protocol RC Car Boat Aircraft Drone (FS-iBT01)
Main highlights- FS-iBA01 Working Current: 10mA/5 V; FS-iBT01 Working Current: 20mA (5 V); FS-iBS01 Working Current: 20mA (5 V).
- FS-iBA01 Measurement Accuracy: 1m; FS-iBT01 Measurement Accuracy: 0.1° C; FS-iBS01 Measurement Accuracy: 10RPM.
- FS-iBA01 FS-iBT01 FS-iBS01 Protocol: i-BUS2; Input Power: 3.5 ~ 9V/DC; Online Update: No; Water Proof: PPX6.
- FS-iBA01 Compatible Models: Cars or airplanes; FS-iBT01 Compatible Models: Cars, boats, helicopters, fixed-wing aircraft, fighting robots, engineering vehicles; FS-iBS01 Compatible Models: Cars, boats, airplanes.
- Compatible Devices: Supports receivers that comply with i-BUS2 protocol series (such as FTr8B, FTr12B, INr6-HS and other Flysky AFHDS 3 enhanced receivers).
Flysky FTr8B AFHDS3 2.4G 8CH Receiver PWM/PPM/i.Bus Out/S.Bus Dual Antenna for PL18 NB4 NB4 Lite Helicopter Fixed Wing
Main highlights- Temperature Range: -10? to +60? ; Humidity Limit: 20%-95%; Dimensions: 46*23.8*14.8mm.
- PWM Channels: 7(Version 2.0 will be upgraded to 8 channels)
- Model Type: fixed wing, glider, helicopter, delta wing, engineering vehicle, etc
- Compatible transmitters: for all AFHDS 3 transmitters and RF Modules (PL18, NB4, NB4 Lite, etc.)
- 2.4G Protocol: AFHDS 3; Antenna: Dual Antennas ; Data Output: PWM/PPM/i.BUS out/S.BUS.
GoolRC Flysky FGR8B Receiver, 2.4GHz 8CH Remote Control Receiver PWM/PPM/i-Bus Output Compatible with AFHDS 3 Transmitters and RF Modules PL18/ NB4 /NB4 Lite/ FRM302 for RC Car RC Boat
Main highlights- With compact size and light-weight, no worry to give any burden to your RC Model.
- Warranty: If there are any problems, please contact our store in time. We will give you a satisfactory solution.
- The FGr8B receiver is suitable for RC model such as boat and car.
- It uses a single-antenna bidirectional transmission system and is uniquely designed to install and output PWM/PPM/i-bus in signals.
- Compatible with all AFHDS 3 transmitters and RF modules including PL18, NB4, NB4 Lite, FRM302 etc.
Flysky FBr8 8CH AFHDS 3 Protocol Waterproof PPX7 Receiver for RC Car Boat (Standard Antenna Edition)
Main highlights- This receiver features waterproof level PPX7, a single external antenna, and unidirectional and bi-directional transmission.
- There are two versions of this receiver, one is the standard antenna version and the other is the extended antenna version. Please choose according to your needs.
- It supports four Newport function interfaces. Newport interfaces can be customized with the input or output signal type: i-BUS2/S.BUS/i-BUS/PPM, etc.
- It adapts all transmitters or RF modules which support AFHDS 3 protocol.
- FLYSKY FBr8 is an 8-channel receiver based on AFHDS 3 third-generation automatic frequency hopping digital system protocol.
Black Friday Sale
Deal ends in
HrsMinSec