Flashforge Creator Pro 2 Upgrades of 2025
Best Choice1
usmenghefor Flas-hforge for Cre-ator Pro 2 3D Printer Parts All Extruder Kit Left/Right Extrusion Head(Right)
Main highlights- The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Please allow slight manual measurement deviation for the data.
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
nlhhearnlhhear for Flashforge for Creator Pro Dual Extruder Assembly Full Kit for Flashforge 3D Printer Hotend Spare Parts
Main highlights- 1
- 1
9.6Exceptional
View offer on:
Show more
3
SmilyeezSmilyeez Listing for FlashForge HP-00057 Platform Sticker for Creator Pro, Creator Pro 2, Dreamer, Dreamer NX, and Inventor - 232mm x 154mm Original Build Surface (Pack of 5)
Why we love it
Seamlessly fits multiple FlashForge models.
Easy application with bubble-free finish.
Durable for multiple printing sessions.
9.5Excellent
View offer on:
Show more
4
G-Hubble3D Printer 230x150mm PEI Sheet【Double Sided Textured/Smooth】Spring Steel Flexible Build Plate with Magnetic Base for Creator Pro 2/QID1 X-pro.
Main highlights- 【Special Design】: Excellent design——In a spring steel plate using 2 different materials, one side of smooth film can produce mirror printing effect, the other side of textured spraying, produce matte printing effect, Compared with the same materials design, it is more cost-effective.
- 【Quality Promise】: All products have UNDERGONE QUALITY INSPECTION before delivery. If you have any questions about product quality and suggestions, please feel free to contact us and we will reply within 24 hours.
- 【Proven Solution】:No glue, No tap, when hotbed temperature reaches 60℃ ,materials such as PLA，80℃ PETG，and 130℃ ABS will stick well, and after printing, when spring steel PEI build plate cools to room temperature, it's easy to remove the printed matter from the platform by bending slightly. Through hundreds of experimental tests, repeated use is still new.Note:The adaptation temperature of different materials is different. Please adjust it reasonably.
- 【Practical Features】：Size 230 x150mm/9.0x5.9 inch PEI sheet is suitable for Makerbot Replicator, Flashforge Creator Pro 2, Dreamer and Inventory Select Mini V1 and V2 and similar size 3D printers. Please measure the size of your printing platform before purchasing. We are very grateful for your love and care for the product.
- 【Good Quality】: We use 100% imported PEI raw materials, which are thicker and more used, Easily handle temperatures up to 130°C and perfect for PLA, PEEK, ABS. The process is upgraded so it does not affect any use of bubbles. PEI is very expensive compared to PET/PEO, but its good performance, especially high temperature resistance and stability are still ahead. You get what you pay for, I hope you can choose more suitable products according to your own printing materials.
9.2Excellent
View offer on:
Show more
5
SmilyeezSmilyeez Listing for Flashforge Creator Pro 2 Nozzle and Tube Set: 2 High-Precision 0.4mm Brass Nozzles and 2 Durable PTFE Tubes - Optimal 3D Printing, Easy Installation, and Enhanced Longevity
Main highlights- Versatile PTFE Tube Compatibility: This set contains 2 PTFE tubes compatible with both the original and updated versions of the FlashForge Creator Pro 2 extruder hot-ends, catering to your specific 3D printer model requirements.
- Precision Printing with 1.75mm Filament: The 0.4mm brass nozzles are perfect for precision 3D printing, ensuring compatibility and excellent results with 1.75mm filament.
- Optimal High-Temperature Performance: The PTFE tubes are capable of withstanding temperature ranges of 260-280 Degrees Celsius, ensuring reliable functionality during high-temperature 3D printing tasks.
- High-Quality Brass Nozzles: The package includes 2 precision-machined 0.4mm brass nozzles, ensuring durability, longevity, and consistent high performance for your 3D printing needs.
- Easy Maintenance and Repair: Ideal for replacing worn-out components, this set helps in preventing extrusion issues and guarantees smooth operation, prolonging the life of your 3D printer.
8.9Very Good
View offer on:
Show more
6
Ruimou2 pcs MK10 M7 Extruder Nozzle 0.4mm and 2pcs PTFE Tube kit, for Wanhao FlashForge Creator Pro 2 QIDI Technology etc 3D Printer Repair Parts Replacement (2-Pack)
Main highlights- *Usually these parts are used to fix the paper jam inside the nozzle.
- *Package:2x MK10 Nozzle ,2x 4mm PTFE tube (71mm Length )
- *Compatible with both FlashForge Creator Pro and Dreamer 3d printers .Tubes It is also suitable for other extruders using polytetrafluoroethylene pipes.
- * PTFE tube: Inner Diameter (ID) 2mm, Outer Diameter (OD) 4mm,Length is 71mm .Upper Temperature Range 260-280 Degrees Celsius.
- * 0.4mm MK10 extruder nozzle ,Thread: M7 Screw thread,diameter: 0.4mm .is very suitable for 1.75mm filament 3D printer.
8.7Very Good
View offer on:
Show more
7
AJOYIB13% OffAJOYIB Double Sided Textured PEI Build Plate Flexible Steel Print Bed Compatible with Creator Pro 2 / QID1 X-pro
Why we love it
Easy to install and remove.
Strong adhesion for PLA and PETG.
Durable magnetic base withstands heat.
8.6Very Good
View offer on:
Show more
8
FLASHFORGEFlashForge Creator Pro 2 3D Printer Repair Parts, 2 Nozzles and 8 Teflon Tubes
8.5Good
View offer on:
Show more
9
SmilyeezSmilyeez Listing for Flashforge Creator 3 PRO 3D Printer Build Plate Surface Print Sticker (2)
Main highlights- Simply clean the build plate surface, remove the protective backing, and apply the sticker. When the print is finished, the sticker can be easily removed without leaving any residue.
- Reliable Build Plate Adhesion: This Creator 3 Build Plate Surface Print Sticker provides excellent adhesion, ensuring that your 3D prints stick to the build plate without warping or curling, resulting in a more successful print job.
- Perfect Fit: The Creator 3 Build Plate Surface Print Sticker is designed to perfectly fit the Flashforge Creator 3 3D Printer's build plate, ensuring a smooth and seamless printing experience.
- Easy to Apply and Remove: The Creator 3 Build Plate Surface Print Sticker is easy to apply and remove, which saves time and hassle in the printing process.
- Durable Material: Made from high-quality, durable materials, this Creator 3 Build Plate Surface Print Sticker is built to last, ensuring that you can print multiple times without worrying about wear and tear.
8.3Good
View offer on:
Show more
10
Shion.Kwoo10% OffUpgraded Creator Pro 2 Build Plate PEI Sheer,232x152mm Double Sided Smooth/Textured PET+ PEI Spring Steel Print Plarform with Magnetic Bed for Creator Pro 2,QIDi X-pro 3D Printer.
Main highlights- 5.【Guaranteed Satisfaction】: We guarantee the quality and performance of our double-sided textured PET+PEI printing plate. Your queries and suggestions are our priority, and we promise a prompt response within 24 hours. Thank you for choosing our product. Our team is ready to assist you with personalized services tailored to your unique requirements through the platform's messaging system
- 4.【Compatibility】:Compatible with Creator Pro 2, Qid1 X-Pro, Qid1 Tech 1,Dreamer,Inventor 3D Printers. PET side recommended for PLA, TPU, and PETG; PEI side supports PLA, PETG, ABS, TPU, ASA, PVA, PET, PA, PC, etc. Note optimal temperatures and chamber conditions for different filaments. For ABS, consider applying glue on the hotbed for enhanced adhesion.
- 3.【Notes】: Utilizing our PET+PEI spring steel sheet is straightforward. Clean the surface with isopropyl alcohol, heat the hotbed, and start printing. After printing, let the platform cool, gently bend the PEI sheet to remove the print. Note the protective film on the smooth surface, which should be removed before use. Consider the nozzle-hotbed distance to prevent scratching the PET film, and remember that PET is consumable and may lose adhesiveness over time.
- 2.【【Premium Materials】: In addition to acquiring thick PET film and our proprietary high-adhesion PEI formula, we use a 0.4mm thick stainless steel plate that is resistant to deformation and rust. With high flatness and ample toughness, it provides strong adhesion, making it extremely user-friendly. We have extensively tested and verified the results on various machines.
- 1.【Product Features】: For the PET+PEI steel plate, the PET surface exhibits a pattern resembling carbon fiber. The intersection of gloss and matte surfaces forms a striped pattern, creating a three-dimensional and orderly print surface with a distinctive texture. It can withstand temperatures up to 120°C, making it ideal for low-temp filaments like PLA and PETG. The PEI coating presents a delicate matte texture, exuding a calm and stable quality for ABS, with a high-temp resistance of up to 300°C.
8.1Good
View offer on:
Show more
Similar products on Amazon
