10 Best Fep Film 3d Printer Photon In The Us
Best Choice1
KOYOFEIKOYOFEI 5PCS NFEP Film for Resin 3D Printer, nFEP(PFA) Release Film FEP 2.0 for ELEGOO Jupiter, Jupiter SE, Anycubic Photon M3 Max 12.8''-13.6'' Resin 3D Printer 380x260x0.127mm
Main highlights- Less replacement frequency: Compared with traditional FEP film, nFEP (PFA) is made of higher quality materials, which makes it has higher tensile strength and elongation at break. Which leads to each layer being more easily removed when lifted because the PFA fights back more, and a longer life for PFA films because of slightly higher crack resistance.
- Higher printing success rate: nFEP is a specially treated FEP film which has a smoother and more delicate surface. Models printed with nFEP film will have lower viscosity levels, so the pulling force won't be as strong during printing. This means that the success rate will be higher.
- High light transmittance: nfep has a light transmittance of more than 95% and can withstand a high temperature of 220°C, which means that it can work better when printing large models for a long time.
- Dimensions and applicable models:The size of nfep film is 380x260x0.127mm, a set contains 5 pieces. It is compatible with Elegoo Jupiter, Jupiter SE, Anycubic Photon M3 Max 12.8-13.6 inches resin 3D printers.
- Better printing quality: nFEP film, with its excellent peeling performance and smaller deformation during peeling, allows the printed model to have better print quality and rich details. More suitable for large-format SLA and LCD 3D printers.
9.6Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
ANYCUBICANYCUBIC FEP Film for Photon M3 Max LCD 3D Printer (5pcs)
Main highlights- Please attention to this, fep film is comsumable part, should be replaced once deformed or damaged during printing.
- If you have any problem or question, please feel free to contact us and you can get reply in 12 hours
- High-quality materials, resistant to high temperatures (204 °C), Chemically resistant, Ultimate non-stick surface, UV stable
- For Anycubic Photon M3 Max, and other below 13.6 inch resin 3d printers. it can be cut to fit different sized resin vat, 5PCS
- Film dimensions: 390x263 (mm) Film Thickness: 0.1mm, light Transmittance: 95％
9.4Excellent
View offer on:
Show more
3
Mefine5PCS A4 FEP Film for Elegoo Saturn 2/3/4/4 Ultra/8K, Anycubic Photon Mono M5, M5s, M7, M7 Pro, M3 Premium, Mono X 6K, Phrozen Sonic Mighty 4K LCD 3D Printers, 210x300x0.15mm FEP Film Replacement
Main highlights- Wide Compatibility: 210x300mm in size, 0.15mm in thickness, 5 in quantity. Suitable for Elegoo Mars 4/ 5/ 5 Ultra, Saturn 2, Saturn 3, Saturn 8K, Saturn S, Saturn 4/4 Ultra, Anycubic Photon M3 Premium, M5, M5s, M5s Pro, M7, M7 Pro, M3, M3 Plus, Mono X 6K, Sonic Mighty 4K and other 9.1'' - 10.1'' LCD 3D printers.
- Stable Release Force: Uniform coating, stable release force, good release effect for most resins, smooth and flawless surface, no wrinkles, scratches, bubbles, and other defects, -240°C to 205°C heat resistance and durable quality to meet the requirements of a variety of product release, reusable.
- High Transmittance: More than 95% light transmittance 3D release film with high light transmittance, UV light transmittance of more than 95%, so that the printed products are perfect, providing product quality.
- High Purity FEP: 3D printing special FEP release film, using ultra-high purity FEP resin. Made of hot melt extrusion cast film. With excellent non-stick, high-temperature resistance, electrical insulation, mechanical properties, wear resistance, and other characteristics.
- Excellent Ductility: Excellent elongation performance, ductility up to 300%, good flexibility, bending 10000 times.
9.2Excellent
View offer on:
Show more
4
KOYOFEIKOYOFEI 6 PCS FEP Film for Resin 3D Printer, FEP Film for ELEGOO Mars 4, Mars 4 Ultra, Saturn, Saturn S, Photon Mono 2, Mono X, Mono X 6K, M3, M3 Plus, Sonic Mini 8K 3D Printer 260 x 200 x 0.15mm
Main highlights- Understandable instructions are included, which are printed on the packaging and explain how to change the FEP film.
- Heat-resistant from -240 ° C to 205 ° C and durable quality for long-term use.
- Contains an easy-to-follow package tutorial that guides you on how to replace the FEP film.
- Compatible with ELEGOO Mars 4, Mars 4 Ultra, Saturn, Saturn S, Mars 4 Max, Photon Mono 2, Mono X, Mono X 6K, Photon Mono X 6KS, Photon Mono X2, M3, M3 Plus, Sonic Mini 8K, Mighty 4K, Halot Lite, Halot Ray, LD-006 7.1-9.25 inch mono resin 3D printers.
- 6PCS FEP film, 260 * 200mm and with a thickness of 0.15mm; 95% light transmission, which ensures high stability of the UV flash.
8.9Very Good
View offer on:
Show more
5
ANYCUBICANYCUBIC FEP Film for Photon M3 Max LCD 3D Printer (2pcs), Original Fep Film Replacement
Main highlights- Please attention to this, fep film is comsumable part, should be replaced once deformed or damaged during printing.
- If you have any problem or question,please feel free to contact us and you can get reply in 12 hours
- High-quality materials, resistant to high temperatures (204 °C), Chemically resistant, Ultimate non-stick surface, UV stable
- For Anycubic Photon M3 Max, and other below 13.6 inch resin 3d printers. it can be cut to fit different sized resin vat, 2PCS
- Film dimensions: 390x263 (mm) Film Thickness: 0.1mm, light Transmittance: 95％
8.8Very Good
View offer on:
Show more
6
Comgrow6PCS Creality FEP Film Release Films 260 x 200 x 0.15mm for ELEGOO Saturn/Saturn S/Mars 3 Pro/ANYCUBIC Photon Mono X/Photon Mono X2/Photon Mono X 6K/Photon M3/Phrozen Sonic Mighty 4K LCD 3D Printer
Main highlights- WIDE COMPATIBILITY - Fit for ELEGOO Saturn/Saturn S/Mars 3 Pro/ANYCUBIC Photon Mono/Photon Mono X/Photon Mono X2/Photon Mono X 6K/Photon M3/Photon M3 Plus/Phrozen Sonic Mighty 4K 3D printer. Please confirm whether this FEP Film is compatible with your 3D Printer Before buying.
- STABLE RELEASE FORCE - FEP melts at high temperature, passes through the extrusion equipment, and is poured into a similar plane to form with uniform thickness. Long-lasting durability, and stable release force.
- HIGH-TEMPERATURE RESISTANCE - Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging.
- HIGH TRANSMITTANCE - The 3D release film, with high transmittance of over 95%, makes more perfect printing. Thickness: 0.15mm. Size information: 260 x 200mm. Package: 6 PCS Film.
- HIGH PURITY FEP - Special FEP release film, using ultra-high purity FEP resin. It is made from hot melt extruded cast film. It has excellent non-stick, high-temperature resistance, insulation, wear resistance, and other characteristics.
8.7Very Good
View offer on:
Show more
7
SovolSovol 3D Printer Resin Vat Anodized Aluminium with FEP Film & Steel Ring Preinstalled, Durable Metal Frame Resin Tank (Photon Mono 4K)
Main highlights- With double silicone covers, keep the resin vat and FEP film away from dust, scratch, UV light source or direct sunlight. Perfect for resin storage.
- Sovol 3D resin vat fits for ELEGOO Mars/ Mars Pro/ Mars 2/ Mars 2 Pro/ Mars C, Anycubic Photon/ Photon S/ Photon Mono/ Photon Mono 4K/ Photon Mono Se/ Photon D2/ Photon Ultra, QIDI TECH Shadow 5.5 S, and Epax X1. The FEP film and steel ring have been preinstalled. NOTE: Please check if the protective films have been peeled off before installation.
- Perfect spare resin vat when you need to change resin color faster and have a better printing experience.
- New design single steel ring with upgraded FEP film, less effort to drill and install, no difference on function. If you need to replace the FEP film, our new FEP film (pre-drilled) is recommended, that is avaible in our store.
- Made of anodized aluminum and durable design for long term usage. Clear and wear-resistance measurements, easier to use and convenient for printing. Note: Please change the bottom lift speed to 65mm/min or 1mm/s.
8.4Good
View offer on:
Show more
8
Mefine3PCS NFEP Film 260x200x0.15mm FEP 2.0 for ANYCUBIC Photon M3/M3 Plus/Mono X, ELEGOO Saturn/Saturn S/4K, Sonic Mighty 4K, Creality LD-006, Halot-lite 8-9-9.25 LCD 3D Printer, Resin Tank Fep Replacement
Main highlights- Wide Compatibility: NFEP replacement film for Anycubic Photon Mono X, Photon Mono X 6K, Photon Mono X2, Photon M3, Photon M3 Plus, Elegoo Saturn, Saturn S, Saturn 4K, Phrozen Sonic Mighty 4K, Creality Halot-one Pro, Halot-one Lite, Halot Sky, Flashforge foto 9.25, Flashforge foto 8.9 and other resin vat whose size is less than 200*260mm(7.87*10.23in). Size: 200 x 260mm; thickness: 0.15mm; quantity: 3 PCS
- Stable Release Force: Uniform coating and high-quality NFEP material have high-efficiency separation effect, which brings faster printing speed and service life. The surface of FEP 2.0 film is smooth, free from wrinkles, scratches, and air bubbles, and can meet the release requirements of various models for repeated use
- High-purity NFEP: 3D printing special NFEP release film, using upgraded fluoroplastics, the quality is better than FEP raw materials. Made of hot-melt extruded cast film, it has excellent non-stick, high temperature resistance, electrical insulation, mechanical properties, wear resistance and other characteristics
- Durability: This release film has excellent elongation properties and flexibility, the ductility is as high as 300% and can be bent 15,000 times. Heat resistant up to 250°C, high-quality for long-term usage
- 95% High Transmittance: NFEP film for a 3D printer is a casting film of melt extrusion made of upgraded fluoroplastics. lt has good non-viscosity, heat resistance, electrical insulation, mechanical properties, and wear resistance. It has a light transmittance of more than 95%, making the printing perfect
8.3Good
View offer on:
Show more
9
ANYCUBICANYCUBIC FEP Film for Resin Printers Below 6.23 Inches, Only Suitable for Photon Mono/Mono 4K/Photon Ultra/Photon D2, Not for Photon Mono 2 (2PCS)
Main highlights- The FEP is suitable for Anycubic Photon Mono,Mono 4K, Photon Ultra, Photon D2, but it is not suitable for photon mono 2
- Quick install, The release film comes with a steel ring, No need to disassemble the steel ring and cut the FEP film. The entire installation process only takes 3 minutes. and there is an easy-to-follow tutorial on the package that guiding you to better replace the FEP film.
- High-quality materials, resistant to high temperatures (204 °C), Chemically resistant, Ultimate non-stick surface, UV stable
- Film dimensions: 173x115.4 (mm) Film Thickness: 0.15mm, light Transmittance: 95％
- As the FEP film is an consumable, regular replacement will make your printing effect better. If you have any questions, please feel free to contact us.
8.2Good
View offer on:
Show more
10
Aulock10pcs FEP Film, 260 x 200 x 0.15mm FEP Release Films Fit for Anycubic Photon Mono X, Photon Mono X 6K, Photon Mono X2, Photon M3 Plus, Elegoo Saturn, Saturn S, Saturn 4K, 3D Printer Accessories Parts
Main highlights- Wide Adaptability: The size of FEP film is 260 x 200 x 0.15mm. Please check whether the 3D printer is compatible, before purchasing. Our FEP film is compatible with Anycubic Photon Mono X, Photon Mono X 6K, Photon Mono X2, Photon M3 Plus, Elegoo Saturn, Saturn S, Saturn 4K, Phrozen Sonic Mighty 4K / 8K, Creality Halot-one Lite, Halot Sky, Flashforge foto 9.25, Flashforge foto 8.9, Flashforge foto 9.25, Voxlab Proxima 8-9.
- Strong and Durable Film: The high-quality NFEP material has good mechanical toughness. They can maintain an elongation of 5% within the temperature range of -319℉(- 196 ℃) to 500℉(260 ℃). Our FEP films are resistant to corrosion and will not be affected by any chemical solvents.
- Improve Printing Success: The FEP films have high peeling strength. Among many solid materials, the surface tension of FEP film is small, which can meet the needs of various prints release. Excellent features will help improve the success rate of 3D printing.
- Higher Light Transmittance: Our FEP film is high transparency and high transmittance. The UV transmittance of FEP films is up to 96%, the curing time is short, and the curing effect is good. These FEP films have high printing accuracy and are essential accessories for 3D printing.
- 10 Sheets in Package: You will receive 10 sheets of FEP films. Both sides of the FEP film are covered with a protective film to prevent it from being scratched or dusted. Please remove the double-sided transparent protective film before use. FEP film can print multiple works, which greatly reduces the cost of 3D printing supplies.
8.1Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for fep film 3d printer photon
