10 Best Esp32 Expansion Board In The Us - Black Friday 2024
Best Choice1
DORHEA3 Set ESP32 ESP-32S WiFi Development Board NodeMCU ESP-WROOM-32 Microcontroller with ESP32 GPIO Breakout Board 30Pin Type-C Micro USB Dual Interface ESP32 Shield 30P Expansion Board
Main highlights- This esp32 kit is safe, reliable, and scalable to a variety of applications. Stable and highly reliable. Great contact and stable signal transmission for your program
- The module is ESP-WROOM-32 module, the peripheral uses the USB serial port chip CP2102 to expand the micro USB interface, which can be directly debugged by a USB connected computer, and the data transmission is fast and stable.
- ESP32 shield 30P expansion board, supports two power supply : DC 6.5-16v and USB 5V
- ESP32 development board GPIO breakout board GVS output power supply can be 5V or 3.3V, which is more convenient to match the external 5V electronic module sensor.
- Dual core ESP-32 development board, 2.4GHz dual mode development board.There are two touch buttons, one is reset, the other is enable module to enter the halberd program mode.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
DWEIIDWEII 3SETS ESP32 Development Board Type-C USB CH340C WiFi+Bluetooth Ultra-Low Power Dual Core ESP32-DevKitC-32 ESP-WROOM-32 Expansion Board
Main highlights- USB driver chip: CH340C, with good system compatibility, higher download speed, and more stability.
- Module model: ESP32-WROOM-32 ;Compatible with ArduinoIDE mixly, mind+, Python and other programming software
- Main control chip: ESP32-DOWDQ6-V3 dual-core 32bit MCU integrated WiFi, Bluetooth,
- Integrated 520-kBSRAM, 448-kBROM16-kBSRAMinRTC
- Development board model: ESP32-DevKitC-32 30Pins ;Support VIN external wide voltage input 5-12V power supply (battery version maximum 5.5V input) Support USB power supply, external 3.3V power supply, and VIN power supply three kinds of power supply Mode development board
9.7Exceptional
View offer on:
Show more
3
AITRIPAITRIP 3PCS 38PINS ESP32 Development Board Type-C/Micro USB CP2102 WiFi+Bluetooth Dual Core ESP32-DevKitC-32 ESP-WROOM-32 Expansion Board
Main highlights- you will get 3PCS 38pins ESP32-DevKitC-32 ESP-WROOM-32 Expansion Board .also（for (ESP32-WROOM-32S) (ESP32-WROOM-32E)；(ESP32-WROOM-32D)；(ESP32-WROOM-32U)；(ESP32-WROVER)；(ESP32-WROVER-IB) ）
- interface: type-C ; Only Can be equipped with WROOM-32D/32U WROVER /ESP32 38pins Wide-version module
- SPECIAL REMINDER: The ESP32 38Pin Expansion Board is only applicable to the following Asin ESP32 development board modules: Asin: B09LMBX8WH ; B09KRHNC6Z; B08HMJ1X6W; B088QVQCTL; B086YS4Z3F Please be sure to identify the product before purchasing to avoid module mismatch.
- Extended version: ESP32 38pin bottom board
- ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA.
9.6Exceptional
View offer on:
Show more
4
FREENOVEFreenove Breakout Board for ESP32 / ESP32-S3 WROVER WROOM, Terminal Block Shield with Pin Header, 5V 3.3V Power Outputs, GPIO Status LED
Main highlights- Terminal block and header -> Connect to all GPIO headers of Raspberry Pi Pico, 2.54mm / 0.1in pitch.
- Power circuit -> Provide multiple 5V and 3.3V power outputs. (5V output up to 3A with external power supply.)
- Independent LED -> The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected.
- GPIO status LED -> LED on if GPIO outputs/inputs high level, LED off if GPIO outputs/inputs low level.
- Compatible models -> Freenove ESP32 / ESP32-S3 series. (Note: Boards from other brands are not compatible due to different pinout.)
9.4Excellent
View offer on:
Show more
5
naughtystartsnaughtystarts for ESP32 Breakout Board 3.5mm / 0.14" Terminal GPIO Expansion Board for 0.9" / 1.0" Size ESP32 Module ESP-WROOM-32 ESP32-DevKitC (Pack of 2pcs)
Main highlights- for ESP32 GPIO expansion board 38pin with terminal.
- The dual-row input bus allows you to plug in 0.9 "or 1.0" ESP32 modules for maximum compatibility.
- Shrapnel Screw Terminal: 3.5mm / 0.14" Pitch
- It's suitable for 18~24AWG cable connection, easy to use.
- It's fully assembled, no soldering required.
9.3Excellent
View offer on:
Show more
6
KeeYeesKeeYees 2pcs ESP32 Breakout Board GPIO 1 into 2 for 38PIN No Mounting Hole Version ESP32 Development Board
Main highlights- UPDATED VERSION: Compared with the previous version, the board of this version has been soldered completely. No need to solder parts by yourself, which is very convenient to use.
- IMPORTANT: Only compatible with 38 pins Narrow and No Mounting Hole Version esp32 development board, ref asin: B07QCP2451. Not applicable to other versions.
- GPIO 1 INTO 2: This breakout board can expand one GPIO pin of esp32 development board to two, which is convenient for users to reuse all pins in smart home projects. Nice breadboard alternative.
- DOUBLE-LAYER PCB: The expansion board is a double-layer board. One pin is wired on both sides. Therefore, the circuit is stable and highly reliable, and there will be no poor circuit contact and unstable signal transmission.
- 2 TYPE CONNECTIONS: Pin Header & Screw Terminal. Just select them according to your purpose.
9.2Excellent
View offer on:
Show more
7
AEDIKOAEDIKO 5pcs ESP32 GPIO Breakout Board ESP32-WROOM-32 ESP32 ESP-32S Development Board 30Pin Type-C Micro USB Dual Interface ESP32 Expansion Shield
Main highlights- JUMP Interface: ESP32 Breakout Board Designed with JUMP Interface,Which Can Provide the Default Jumper Cap to Choose GVS Output Power Supply of 5V or 3.3V, Which is More Convenient to Match the External 5V Electronic Module Sensor
- Easy to Use: ESP32 Breakout Expansion Board Come with GVS Interface,Which is Convenient to Access Various Electronic Module Sensors and the Board is Fully Assembled,No Soldering Required
- ESP32 GPIO Breakout Expansion Board is a Small and Simple Expansion Board and Convenient for Wiring and Experiment
- ESP-WROOM-32 GPIO Breakout Expansion Board: Support USB Power Supply, External 3.3V Power Supply and VIN Power Supply
9.0Excellent
View offer on:
Show more
8
ACEIRMCACEIRMC 6pcs ESP32 GPIO Breakout Board 30Pins ESP32 Development Board Type-C USB and Micro USB CH340C WiFi+Bluetooth Ultra-Low Power Dual Core ESP32-DevKitC-32 ESP-WROOM-32 Expansion Board
Main highlights- USB driver chip: CH340C, with good system compatibility, higher download speed, and more stability.
- The GVS output power supply can be 5V or 3.3V, which is more convenient to match the external 5V electronic module sensor.
- Integrated 520-kBSRAM, 448-kBROM16-kBSRAMinRTC
- ESP32 shield 30P expansion board, supports two power supply : DC 6.5-16v and USB 5V
- ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA.
8.9Very Good
View offer on:
Show more
9
FancyWhoop2 Set ESP-32S ESP-WROOM-32 ESP32 Development Board 30Pin CH340C WiFi+Bluetooth Dual Cores USB Type-C Microcontroller ESP32-DevKitC-32 ESP-WROOM-32 with Expansion Board for Arduino
Main highlights- The module supports a data transmission rate of up to 150 Mbps and an antenna output power of 20 dBm, enabling wireless communication within the maximum range
- The core of this module is the ESP32 chip, which has the characteristics of scalability and adaptability. Two CPU cores can be controlled separately. The clock frequency adjustment range is 80MHz to 240 MHz, supports RTOS, and is a universal Wi Fi+BT+BLE MCU module
- The Nodemcu-32s module integrates traditional Bluetooth, low-power Bluetooth, and Wi-Fi. WIFI frequency range 2.4GHz~2.5GHz
- Supports secondary development and integrates Windows and Linux development environments. Support STA/AP/STA+AP working mode
- Supports UART/GPIO/ADC/DAC/SDIO/SD card/PWM/I2C/I2S interfaces. Support local serial port upgrade and remote firmware upgrade (FOTA)
8.7Very Good
View offer on:
Show more
10
ACEBOTTACEBOTT Easy-Plug ESP32 Expansion Board, ESP32-IO Sensor Expansion Board, for ESP32 Development Board (QA017)
Main highlights- What You Get: 1 ACEBOTT ESP32 expansion board
- It comes fully assembled, no soldering required；1 power interface (maximum input voltage 15V output current 3A); operating temperature 0~70℃
- ESP32-IO sensor expansion board size: 68.1mm*52.1mm; weight: 22.1g
- ESP32 expansion board composition description: Eight 3-pin digital pins for connecting 5V sensors/modules Six 3-pin analog pins, four of which are connected to 5V sensors/modules and two are connected to 3.3V sensors/modules One 4-pin digital pin (two signal pins, one power supply, and one GND) One 4-pin digital pin (three signal pins and one GND) Two rows with ESP32-Max-V3.0 pin interfaces Two I2C pins Two servo interfaces One serial port 1 power interface
- ACEBOTT-ESP32-Shield-V1.0 is an expansion board for the ESP32-Max-V3.0 controller board. The expansion board uses a standardized connection method, which simplifies the hardware connection process, reduces the user's wiring work, reduces the possibility of errors, and better helps developers improve project development efficiency
8.4Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for esp32 expansion board
