10 Best Esp32 Development Board In The Us - Black Friday 2024
Best Choice1
DORHEA4PCS ESP32 Type C Development Board ESP32S Type-C USB WiFi + Bluetooth ESP-WROOM-32 2.4GHz CH340C Dual Core WiFi NodeMCU Processor Microcontroller ESP32-DevKitC-32
Main highlights- The module supports for NodeMCU and other development environments, which expands the range of its resources available and greatly improves the ease of learning and development. Of course, it can also be widely used in Internet of things occasions, such as home automation, wireless industrial control, wireless positioning system signal
- The module is ESP-WROOM-32 module, the peripheral uses the USB serial port to expand the type c interface, which can be directly debugged by a USB connected computer, and the data transmission is fast and stable.
- ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values exceed the threshold.
- ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA.
- Dual core ESP-32 development board, 2.4GHz dual mode development board. There are two touch buttons, one is reset, the other is enable module to enter the halberd program mode. This Esp32 module charging cable doesn’t support type c to type c fast charging cable, only supports usb to type c ordinary charging cable
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
DORHEA3 Set ESP32 ESP-32S WiFi Development Board NodeMCU ESP-WROOM-32 Microcontroller with ESP32 GPIO Breakout Board 30Pin Type-C Micro USB Dual Interface ESP32 Shield 30P Expansion Board
Main highlights- This esp32 kit is safe, reliable, and scalable to a variety of applications. Stable and highly reliable. Great contact and stable signal transmission for your program
- The module is ESP-WROOM-32 module, the peripheral uses the USB serial port chip CP2102 to expand the micro USB interface, which can be directly debugged by a USB connected computer, and the data transmission is fast and stable.
- ESP32 shield 30P expansion board, supports two power supply : DC 6.5-16v and USB 5V
- ESP32 development board GPIO breakout board GVS output power supply can be 5V or 3.3V, which is more convenient to match the external 5V electronic module sensor.
- Dual core ESP-32 development board, 2.4GHz dual mode development board.There are two touch buttons, one is reset, the other is enable module to enter the halberd program mode.
9.7Exceptional
View offer on:
Show more
3
AITRIPESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA Compatible with Arduino IDE (3PCS)
9.5 Simple to use9.3 Bluetooth connection9.1 worth the moneyWhy we love it
Integrated Wi-Fi and Bluetooth for versatile connectivity.
Compatible with Arduino IDE for easy programming.
Ultra-low power consumption ideal for various projects.
9.4Excellent
View offer on:
Show more
4
FancyWhoopESP32 ESP-32S ESP-WROOM-32 Development Board Kits 2.4GHZ Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Compatible with Arduino IDE NodeMCU (38 Pin ESP-32S USB-C)
Main highlights- · 2.4GHz Dual Mode WiFi+Bluetooth Development Board: Built in ESP32-S2 chip, Xtensa single core 32-bit LX7 microprocessor, supporting clock frequencies up to 240 MHz. 128 KB ROM, 320 KB SRAM, 16 KB RTC SRAM. The chip supports secondary development without the need for other microcontrollers or processors
9.2Excellent
View offer on:
Show more
5
HiLetgoHiLetgo 3pcs ESP32 ESP-32D ESP-WROOM-32 CP2012 USB C 38 Pin WiFi+Bluetooth Dual Core Type-C Interface ESP32-DevKitC-32 Development Board Module STA/AP/STA+AP
Main highlights- With 2.4GHz WiFi+Bluetooth Dual-mode, support STA/AP/STA+AP mode, universal AT command, easy to use.
- Support many kinds of interfaces such as UART/SPI/I2C/PWM/DAC/ADC.
- ESP32 integrates antenna, switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules.
- ESP32 CP2012 USB C (Type-C) core board, it has 38 pins and more features than a 30-pin module. Narrower width, can be connected to the breadboard very well.
9.1Excellent
View offer on:
Show more
6
Teyleten Robot25% OffTeyleten Robot ESP32S ESP32 ESP-WROOM-32 Development Board 2.4GHz Dual-Core WiFi +Bluetooth 2 Function Microcontroller for Arduino (ESP32 30P, 3PCS)
Main highlights- If you think you have received the wrong product, please contact us and give us a chance to correct it,We also have tech support, just contact us on Amazon,thank you.
- 9. 38P and 30P board sizes and circuit layouts are different.
- 8. Durable material: This product is made of high-quality material, durable, long service time, firm and stable in use.
- 7.you need to driver the CP2102 before you can start using it
- 6.The maximum operating voltage of the ESP32 is 3.3V. The ESP32 has an on-board voltage regulator that can withstand voltages up to 5V using the VIN and GND pins. Once a voltage is input to the ESP32 development board's VIN pin, that voltage is passed through the ESP32's on-board voltage regulator (AMS1117), which outputs a constant 3.3V, which is the board's operating voltage. Note: The maximum operating voltage of the ESP32 is 3.3V. The maximum voltage that can be applied to the ESP32 Development Board from the VIN pin is 5V.USB power supply is 5V.
- 5.For Arduino IDE,choose ESP32 DEV,make sure that your program or run a program smaller than the ESP32 configuration
- 4. Compact and portable: being so mini and light-weight, this product does not take much space and can be easily taken away.
- 3. Meticulous workmanship: The meticulous design, perfect in workmanship, durable and long service life.
- 2. The best power and RF characteristics are safe, reliable and scalable for various applications.
- 1. The complete solution takes up the least printed circuit board area. This board is used with 2.4GHz dual-mode WiFi and wireless chips using 40nm TSMC low-power technology.
9.0Excellent
View offer on:
Show more
7
AITRIPAITRIP 2 Sets ESP-WROOM-32 ESP32 ESP-32S Development Board CP2102 WiFi+Bluetooth Ultra-Low Power Dual Core ESP32-DevKitC-32 ESP-WROOM-32 with ESP32 Breakout Board Shield GPIO 1 into 2 for Arduino
Main highlights- You will get 2 PCS ESP32S ESP32 ESP-WROOM-32 Development Board 2.4GHz Dual-Core WiFi +Bluetooth 2 Function Microcontroller with 2PCS ESP32 Breakout Board Shield GPIO 1 into 2
- Support USB power supply, external 3.3V power supply, and VIN power supply three kinds of power supply Mode development board
- ESP32 CP2102 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA.
- ESP32 CP2102 30pins Compatible with Arduino IDE and Ultra-Low power consumption
- AITRIP GPIO 1 INTO 2 breakout board can expand one GPIO pin of esp32 development board to two, which is convenient for users to reuse all pins in smart home projects.
8.8Very Good
View offer on:
Show more
8
AITRIPAITRIP 2 Sets ESP-WROOM-32 ESP32 ESP-32S Type-C USB Development Board Type-C USB CH340C WiFi+Bluetooth Ultra-Low Power Dual Core ESP32-DevKitC-32 ESP-WROOM-32 Expansion Board for Arduino
9.7 worth the money9.3 Simple to use8.7 DurabilityWhy we love it
Versatile for IoT and embedded systems projects.
Easy USB Type-C connectivity for hassle-free connections.
Energy-efficient with ultra-low power consumption.
8.6Very Good
View offer on:
Show more
9
FREENOVEFreenove Breakout Board for ESP32 / ESP32-S3 WROVER WROOM, Terminal Block Shield with Pin Header, 5V 3.3V Power Outputs, GPIO Status LED
Main highlights- Terminal block and header -> Connect to all GPIO headers of Raspberry Pi Pico, 2.54mm / 0.1in pitch.
- Power circuit -> Provide multiple 5V and 3.3V power outputs. (5V output up to 3A with external power supply.)
- Independent LED -> The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected.
- GPIO status LED -> LED on if GPIO outputs/inputs high level, LED off if GPIO outputs/inputs low level.
- Compatible models -> Freenove ESP32 / ESP32-S3 series. (Note: Boards from other brands are not compatible due to different pinout.)
8.4Good
View offer on:
Show more
10
DORHEA3PCS ESP32 Type C Development Board ESP32S Type-C USB WiFi + Bluetooth ESP-WROOM-32 CH340C 2.4GHz Dual Core WiFi NodeMCU Processor Microcontroller ESP32-DevKitC-32
Main highlights- The module supports for NodeMCU and other development environments, which expands the range of its resources available and greatly improves the ease of learning and development. Of course, it can also be widely used in Internet of things occasions, such as home automation, wireless industrial control, wireless positioning system signal
- The module is ESP-WROOM-32 module, the peripheral uses the USB serial port to expand the type c interface, which can be directly debugged by a USB connected computer, and the data transmission is fast and stable.
- ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values exceed the threshold.
- ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA.
- Dual core ESP-32 development board, 2.4GHz dual mode development board. There are two touch buttons, one is reset, the other is enable module to enter the halberd program mode. This Esp32 module charging cable doesn’t support type c to type c fast charging cable, only supports usb to type c ordinary charging cable
8.3Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for esp32 development board
