10 Best Esp 32 Wireless Module In The Us - Black Friday 2024
YEJMKJ 2pcs ESP32 CAM Development Board WiFi Bluetooth Module with 8MP OV2640 Camera Module Micro USB to Serial Port CH340G with TF Card Slot for Raspberry Pi for Arduino
Main highlights- [Video surveillance]: ESP32 with camera ESP32-CAM can capture and transmit video streams by connecting the camera module for monitoring and security systems.
- [Remote image transmission]: ESP32 CAM uses its supported OTA function to update and upgrade the firmware through the wireless network, thereby realizing remote management and control.
- [Intelligent robots]: ESP-32S combines its powerful processing power and the flexibility of GPIO pins to develop intelligent robots or remote control vehicles for visual navigation and control.
- [Image recognition and processing]: Using the processing power and camera interface of ESP32-CAM, image recognition, face recognition and other applications can be performed, such as access control systems or quality inspection on automated production lines.
- [Application scenarios]: ESP WROOM 32 can be widely used in various IoT occasions, such as home smart devices, industrial wireless control, wireless monitoring, face recognition and other IoT applications. It is an ideal solution for IoT applications.
- Curious about how we select the top products for you? Explore How It Works
HiLetgo 3pcs ESP32 ESP-32D ESP-WROOM-32 CP2012 USB C 38 Pin WiFi+Bluetooth Dual Core Type-C Interface ESP32-DevKitC-32 Development Board Module STA/AP/STA+AP
Main highlights- With 2.4GHz WiFi+Bluetooth Dual-mode, support STA/AP/STA+AP mode, universal AT command, easy to use.
- Support many kinds of interfaces such as UART/SPI/I2C/PWM/DAC/ADC.
- ESP32 integrates antenna, switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules.
- ESP32 CP2012 USB C (Type-C) core board, it has 38 pins and more features than a 30-pin module. Narrower width, can be connected to the breadboard very well.
Hosyond 2Pcs ESP32-CAM Wireless WiFi+Bluetooth Development Board with OV2640 Camera Module Compatible with Arduino
Main highlights- The main frequency is up to 240MHz, and the computing power is up to 600 DMIPS.
- It is an ideal solution for IoT applications. The ESP-32CAM comes in a DIP package that plugs directly into the backplane for rapid production.
- ESP32CAM is based on ESP32 chip and OV2640, use low-power dual-core 32-bit CPU, which can be used as an application processor.
- ESP-32CAM can be widely used in various IoT applications. Suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, etc.
- Built-in 520 KB SRAM , external 8MB PSRAM ,support UART/SPI/I2C/PWM/ADC/DAC and other interfaces;Support picture wireless upload, TF card, multiple sleep modes, STA/AP/STA+AP working mode, secondary development.
Type-C D1 Mini NodeMCU ESP32 ESP-WROOM-32 WLAN WiFi Bluetooth IoT Development Board 5V Compatible for Arduino (3pcs Type-C)
Main highlights- Designed with ultra-low power technology, it offers the full range of performance and features of the ESP32 chip. The pin arrangement provides compatibility with the modules developed for the D1 Mini ESP8266 while also offering fast WLAN, enhanced GPIO, Bluetooth functionality, and with its higher performance, a wider range of applications.
- Designed with ultra-low power technology, it offers the full range of performance and features of the ESP32 chip. The pin arrangement provides compatibility with the modules developed for the D1 Mini ESP8266 while also offering fast WLAN, enhanced GPIO, Bluetooth functionality, and with its higher performance, a wider range of applications.
- D1 Mini NodeMCU Type-C ESP32 ESP-WROOM-32 WLAN WiFi Bluetooth IoT Development Board 5V Compatible for Arduino
- All I/O pins have interrupt, PWM, I2C and one-wire capability, except the pin DO.
- 100% compatible with Arudino IDE, Lua and Micropython, it shows robustness, versatility, and reliability in a wide variety of applications and power scenarios.
DIYmalls 2.8" inch ESP32 Display ESP32-2432S028R ILI9341 Resistive Touch Screen 240x320 TFT LCD Module ESP-WROOM-32 Development Board for Arduino IDE
Main highlights- -User manual available if do as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question".
- -Used for remote environment data collection, remote data fusion, remote parameter settings, and other IoT filed applications.
- -Upload code to the 2.8 inch touchscreen via IDE or esp32 flash tool.
- -Comes with 1pcs esp32 display 2.8 inch, 1pcs USB 2.0 to micro USB data cable 1 meter, 1pcs dupont female to 1.25mm wire.
- -Combination of ESP-WROOM-32 ESP32 development board + 2.8 inch display ILI9341 resistive touch screen.
3PCS ESP32-CAM Camera Module ESP32 CAM WiFi Bluetooth Development Board ESP32 Wireless OV2640 Camera Module with Jumper Wire
Main highlights- The ESP32 CAM equips the ESP32 with everything necessary to program, run and develop on the wonderchip. Additionally, the board reserved the MPU6050,BME280 and an analog MIC.
- Note: Please make sure that the input power of the module is at least 5V 2A, otherwise the picture may have water lines; The ESP32 GPIO32 pin controls the camera power. When the camera is working, please pull GPIO32 low; Since IO0 is connected to the camera XCLK, please leave IO0 in the air when using it, and do not connect it to high or low level
- ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
- ESP32 cam using low-power dual-core 32-bit CPU, can be used as an application processor, main frequency up to 240MHz, computing power up to 600 DMIPS, it can be used as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices.
ESP32 ESP-32S ESP-WROOM-32 Development Board Kits 2.4GHZ Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Compatible with Arduino IDE NodeMCU (38 Pin ESP-32S USB-C)
Main highlights- · 2.4GHz Dual Mode WiFi+Bluetooth Development Board: Built in ESP32-S2 chip, Xtensa single core 32-bit LX7 microprocessor, supporting clock frequencies up to 240 MHz. 128 KB ROM, 320 KB SRAM, 16 KB RTC SRAM. The chip supports secondary development without the need for other microcontrollers or processors
- Unique Hardware Security Mechanism: The hardware encryption accelerator supports AES, SHA, and RSA algorithms. RNG, HMAC, and Digital Signature modules provide more security performance. Other security features include flash encryption and secure boot signature verification. A comprehensive security mechanism enables the chip to meet strict security requirements
- Ultra Low Power Coprocessor (ULP): ESP32-S2 series chips support multiple low-power operating states, and ULP low-power coprocessors can operate in ultra-low power states, meeting the requirements of power consumption requirements for various application scenarios. The precise clock gating, dynamic voltage clock frequency adjustment, and adjustable output power of RF power amplifiers unique to chips can balance communication distance, data rate, and power consumption best
- Compatible With Arduino+LoRa: The ESP32 development board is 100% compatible with the Arduino IDE, Lua, and Micropython. It is easy to develop and supports the LWIP protocol, Freertos, and three modes: AP, STA, and AP+STA
- Advanced Peripheral Interfaces & Sensors: SPI, I2S, UART, I2C, LED PWM, LCD interface, Camera interface, ADC, DAC, touch sensor, temperature sensor, and up to 43 GPIOs. In addition, this series of chips also includes a full-speed USB On The Go (OTG) interface, which can support USB communication
- 1、You Can Get: 3PCS ESP32 ESP-32S ESP-WROOM-32 Development Board Kits 2、ESP32-S2 Series Chip Technology Electronic Version Specification Sheet 3、Our Lifetime Warranty, After-Sales Service, And Unconditional Free Replacement With A Brand New One Within 1 Year
EC Buying WT32-ETH01 Development Board, ESP32 Development Board Module Embedded Serial Port to Ethernet 2.4GHz Wi-Fi & Bluetooth Dual-Mode Support WiFi, Ethernet, Bluetooth Output Ethernet Converter
Main highlights- Supports wifi to connect to the Internet or LAN through a router, establish a TCP/UDP connection, access the user's designated server, support wired network access, and support user secondary development.
- Supports serial port, wifi, Ethernet, and Bluetooth data ports in pairs. Transparent data transmission Supports firmware upgrade by connecting to the network over a wired network or wifi.
- Five functions:①Socket function (Socket working mode is divided into four types: TCP Client, TCP Server,UDP Client, and UDP Server, which can be set by AT commands)②Serial port function③Bluetooth function④Wifi function⑤Wired network port access function(Development board is connected to the Internet or local area network through a wired network,Socket function can be configured through AT commands, a TCP/UDP connection can be established, and the user's designated server can be accessed)
- ESP32 series ICs are SOCs that integrate 2.4GHz Wi-Fi and Bluetooth dual-mode, with ultra-high stability, versatility, reliability, and ultra-low power consumption.
- Adopts dual-core Xtensa@ 32-bit LX6 MCU. Integrated SPI Flash 32Mbitl/SRAM 52OKB supports TCP Server, TCP Client, UDP Server, UDP ClientT mode.
MELIFE 2 Pack for ESP32 ESP-32 ESP-32S ESP32S for WeMos Mini D1 4 MB Flash WiFi Bluetooth Wireless Board Based ESP-WROOM-32 Dual Cores Mode CPU
Main highlights- Support three modes: AP, STA and AP+STA.
- Strong function, with the support of lwIP protocol, freertos.
- New ESP32 is already integrated with antenna and RF balun, power amplifier, low noise amplifiers, filters, and the power management module. This module is has multi-functions of Bluetooth, WiFi, 4MB flash.
- Lithium battery interface, 500mA maximum charging current it is 2.4 GHz dual mode WiFi and bluetooth chips by tsmc 40nm low power technology, power and optimized RF characteristics, which is safe, reliable, and scalable to a wide range of applications.
- High performance, Small volume, easy embeded to other products.
YEJMKJ 2 Pieces ESP32 S3 Development Board N8R8 ESP WROOM 32 S3 WiFi+Bluetooth Internet of Things Type-C Core HAT ESP32-S3 Cores Microcontroller Processor WiFi + Bluetooth MCU Module, Dual Type-C
Main highlights- [Use function]: When you need to build smart home devices, industrial automation systems, wearable devices, etc., the ESP32-S3-DevKitC-1-N8R8 module can provide great flexibility and efficiency.
- [Functionality]: The ESP WROOM 32 S3 offers unparalleled versatility and convenience,ESP32 S3 DevKitC 1 n8r8 With WiFi+BLE5.0 connectivity, dual Type-C USB ports, AI IOT functionality, and W2812B RGB lighting,
- [Functional performance]: ESP32-S3 has a complete Wi-Fi subsystem and low-power Bluetooth subsystem, with industry-leading low-power performance and RF performance.
- [Development function]: ESP WROOM 32 S3 can be programmed using development environments such as for Arduino IDE, and ESP32S3 supports multiple programming languages. ESP32 S3 DevKitC 1 can be used as a core processor, breakout board, etc.
- [Connection function]: With built-in Wi-Fi and Bluetooth functions, the ESP WROOM 32 S3 C N8R8 board ensures seamless connection, easy connection and control of devices. Supports multiple low-power working states to meet the power consumption requirements of various application scenarios.
Black Friday Sale
Deal ends in
HrsMinSec