10 Best Esp 01 Wireless Adapter In The Us
Wishiot 2pcs Esp8266 Esp-01 USB Adapter Programmer + 5pcs ESP8266 ESP-01S WiFi Module 4MB Wireless Serial Transceiver
Main highlights- What you will get: 5pc ESP-01S 4MB wifi module + 2pc USB programmer ESP-01S adapter module
- USB Programmer selectable working mode: On-board toggle switch. UART side for serial TTL debugging by AT commands, PROG for firmware programming
- Programmer USB to serial TTL chip: CH340G, please check if your computer has installed the driver before use it
- ESP8266 ESP-01S serial WiFi wireless transceiver module used 4MB Flash, not 1MB flash
- ESP-01 serial wifi module can be directly plugged into the yellow pin header of the USB programmer module without any connection wires
- Curious about how we select the top products for you? Explore How It Works
AITRIP 10PCS ESP8266 Serial Wi-Fi Wireless ESP-01 Adapter Module 3.3V 5V Compatible for Arduino
Main highlights- it is A adapter module for ESP-01 Wi-Fi module.
- it also can be used with Arduino UNO R3 or compatible board
- Working voltage: 4.5~5.5V (On-board 3.3V LDO Regulator)
- Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit)
- 3.3V voltage regulator circuit and onboard level conversion circuit can make 5V microcontroller easy to use with ESP-01 Wi-Fi module.
Wishiot ESP8266 ESP-01S 4MB Serial WiFi Wireless Transceiver Module + CH340G Programmer USB to ESP-01 Wireless Adapter Module 4.5-5.5V
Main highlights- 5, What you will get: 1pc ESP-01S 4MB wifi module + 1pc USB programmer ESP-01S adapter module
- 4, ESP-01 serial wifi module can be directly plugged into the yellow pin header of the USB programmer module without any connection wires
- 3, Programmer USB to serial TTL chip: CH340G, please check if your computer has installed the driver before use it
- 2, USB Programmer selectable working mode: On-board toggle switch. UART side for serial TTL debugging by AT commands, PROG for firmware programming
- 1, ESP8266 ESP-01S serial WiFi wireless transceiver module used 4MB Flash, not 1MB flash
Wishiot ESP-01S Programmer USB to ESP-01 Adapter ESP8266 Wireless WiFi Module Wi-Fi CH340G UART PORG, 4.5-5.5V 115200 Baud Rate 2PCS
Main highlights- What you will get: 2PCS USB to ESP-01 Adapter
- USB to serial TTL chip: CH340G, please install driver before use it
- Easy to use: Unlike other ESP01 programmer, this one has a little rocker switch on the side which is very handy
- ESP-01 serial wifi module can be directly plugged into the yellow pin header without any connection wires
- Baud Rate: 115200, Selectable working mode: On-board toggle switch. UART side for serial TTL debugging by AT commands, PROG for firmware programming
Geekstory ESP8266 ESP-01 Serial WiFi Wireless Adapter Module DC3.3V 5V ESP01 Breakout PCB Adapters Compatible for Arduino(Pack of 5pcs)
Main highlights- Working voltage: 4.5~5.5V (On-board 3.3V LDO Regulator) Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit)
- The WiFi adapter module has super fast response, strong anti-interference ability and high cost performance.
- PACKAGE:You will get 5pcs ESP-01 Adapter Module
- How to email us:Please click “Geekstory”(you can find "Sold by Geekstory" under Buy Now button), in the new page, click “Ask a question”
- 3.3V voltage regulator circuit and onboard level conversion circuit can make 5V microcontroller easy to use with ESP-01 Wi-Fi module.
DiGiYes 3Pcs ESP8266 Serial Wi-Fi Wireless ESP-01 Adapter Module 3.3V 5V Compatible for Arduino
Main highlights- This module is fit for Arduino UNO R3 or compatible board.
- The baud rate is 115200 by default, which can be changed by using the AT command.
- The 3.3V voltage regulator and on-board level conversion circuit make it easy to use the 5V microcontroller with the Wi-Fi module of ESP-01.
- Operating Voltage: 4.5 - 5.5V; Working Current: 0-240mA; Interface Logic Voltage: 3.3V / 5V Compatible.
- It is A adapter module for ESP-01 Wi-Fi module, onboard 3.3V LDO regulator, onboard level switching circuit.
Wishiot ESP8266 ESP-01S WiFi Wireless Serial Transceiver Module 4MB Flash 3.3V Wi-Fi Module Compatible with Ar-duino IDE (5)
Main highlights- 5, What you will get is 5pcs ESP-01S Wifi Serial Transceiver Module 4MB(pls note it supports 3.3V only). If you have any question, pls feel free to contact us by clicking "WISHIOT" under the shopping cart and clicking " Ask a question"
- 4, The ESP-01S is with 2X4 Pin header, and you can plug it to the interface of Burner to download the firmware to ESP-01S/ESP01S. It isalso compatible with Ar-duino IDE, please choose "Generic ESP8285 Module" board in IDE
- 3, Flash memory upgraded from 512KB to 4MB, flash chip XMC 0H32BHIG, XM25QH32CJIG or XM25QH32CHIGU10Q shipped by random
- 2, Compared with ESP-01, ESP-01S has stronger antenna signal, and its pcb layout changed for an improvement in WiFi radio performance
- 1, The ESP-01S WiFi module is based on ESP8266 chip, so ESP-01S has all the functions and performance of ESP8266
Stemedu USB to ESP8266 ESP-01S Programmer Wireless WiFi Transceiver ESP-01 PROG Serial Adapter Module CH340G with 4MB Flash, 115200 Baud Rate
Main highlights- 🚩 What you will get: 1PCS ESP8266 ESP-01S 4MB Module and 1PCS USB to ESP8266 ESP-01S Programmer Module.
- 🚩 This ESP-01S Prog WiFi Programmer module has CH340G USB to TTL driver IC onboard, so you can easily use your computer to do ESP-01 functional debugging. ESP-01 serial wifi module can be directly plugged into the yellow pin header without any connection wires, please install driver before use it
- 🚩 ESP-01S Prog WiFi programmer module with reset button, Please search B08QMMGZLB on Amazon.
- 🚩 Baud Rate: 115200, Selectable working mode: On-board toggle switch. UART side for serial TTL debugging by AT commands, PROG for firmware programming, ESP8266 ESP-01S upgrade to 4MB Flash
- 🚩 After programming the esp-01 and ar-duino uno, you can program over the air (ota), that is a base function of the ESP
ACEIRMC 10pcs ESP8266 Serial Wi-Fi Wireless ESP-01 Adapter Module 3.3V 5V Compatible for Arduino
Main highlights- it is A adapter module for ESP-01 Wi-Fi module.
- it also can be used Compatible with Arduino UNO R3 or compatible board
- Working voltage: 4.5~5.5V (On-board 3.3V LDO Regulator)
- Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit)
- 3.3V voltage regulator circuit and onboard level conversion circuit can make 5V microcontroller easy to use with ESP-01 Wi-Fi module.
EC Buying 3Pcs ESP-01/01S Serial Wireless Transceiver ESP8266 Serial Port to WiFi Module Adapter Board Downloader Type-C Interface ESP-01 ESP-01S CH340 Serial Adapter Board
Main highlights- Unlock effortless wireless transmission capabilities in your devices with the ESP8266 WiFi module ESP-01/01S Wireless Transmission, designed for high-performance applications requiring stable internet connectivity
- The ESP8266 ESP-01S ESP offers dual functionality with manual download options, including an EN reset button and a 100 download mode button, providing you with multiple ways to upload your programs efficiently and effectively
- Streamline your IoT projects with the ESP-01/01S Serial Wireless Transceiver ESP8266 Serial Port to WiFi Module Adapter Board Downloader. Its Type-C interface ensures a seamless connection for fuss-free programming and debugging
- Experience quick and reliable device programming with the CH340 Serial Adapter Board, featuring a built-in automatic download circuit that simplifies the process, allowing you to focus more on development and less on setup
- Enhance your project's flexibility with this adapter’s ability to also function as a USB to 3.3V TTL serial tool when not paired with the ESP-01/01S, making it a versatile addition to your electronics toolkit
Black Friday Sale
Deal ends in
HrsMinSec