10 Best Esc Reverse Brushless In The Us - Black Friday 2024
SEQURE 120A ESC 2-8S Brushless Speed Controller AM32 Forward Reverse Brake for RC Cars Boats Trucks
Main highlights- Visual programming parameter adjustment tool supports motor timing, throttle calibration, current detection, motor steering, telemetry signal and other settings.
- This speed controller has functions of forward, backward and brake
- Support more signal protocols: Dshot (All), PWM, Oneshot, Multishot, etc.
- Safety Protection: low voltage protection, temperature protection, locked rotor protection, current protection, etc.
- Output Capacity: Continuous Current 120A, Peak Current 150A. Input Voltage: DC 7V-33.6V(2-8S Lipo)
- Curious about how we select the top products for you? Explore How It Works
70A Bidirectional ESC, SEQURE Brushless Motor Electronic Speed Controller, Brake, Reverse, Forward, 2S-6S Lipo BLHeli_32 ESC 5V/4A BEC for FPV Drone RC Multi-axis Aircraft
Main highlights- supports motor timing, throttle calibration, current detection, motor steering, telemetry signal and other settings.
- SEQURE 2670 brushless esc supports reverse, towards, brake.
- Low voltage protection, Over-heat protection, Locked rotor protection, current protection, etc.
- Firmware: BLHeli_32, Working voltage: DC 7V-25.2V(2-6S Lipo), Constant current: 70A, Peak current: 110A
- BEC supports adjustable output: 5V/4A, 6V/4A, 7.2V/4A, 8.2V/4A, 12V/3A. Can directly supply power to external devices such as receivers and servos.
- Automatically detects the throttle signal, supports all Dshot signals, and also supports signal protocols such as PWM, Oneshot and Multishot.
- Adopts 32-bit high performance processor STM32G071. Operating frequency could up to 64MHz. Supports 128KHZ PWM frequency.
30A RC Brushless Motor Electric Speed Controller ESC 3A UBEC with XT60 & 3.5mm Bullet Plugs
Main highlights- Programmable - Programming Card or using Transmitter
- Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
- LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4V - 16.8V
- Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
- 5v/3A UBEC (Very Efficient) - ESC can power receiver and servos
Readytosky 50A Bidirectional Brushless ESC 2-6S UBEC 5A 5V Electric Speed Controller for RC Car Boat Underwater Propeller
Main highlights- Simple Manual: 1.Throttle stick must be in center or it will not start. 2.ESC no need to calibrate throttle range. When start,if motor run,please use Throttle triming to make it stop.
- No need to calibrate throttle stroke, plug and play.
- It can be used in cars, ships, underwater thrusters.
- Bidirectional 50A 2-6s UBEC 5A 5V.
- Bidirectional 1:1 power output, no brake,direct reverse, quick response, good handling.
ZTW Shark G2 Series 20A Bi-Direction Water Cooling Brushless ESC with SBEC 4A/5.5V for RC Boat and Other DIY Project…
Main highlights- Supporting high RPM motors and programmable by programming card and transmitter.
- Super smooth, accurate and programmable throttle linearity and throttle response.
- Strong BEC output 4A/5.5V continuous and peak to 5A.
- Over temperature protection ,low voltage cut off protection ,signal loss protection and so on.
- High efficiency with low resistance and low heat MOSFET and CPU.
TOYTENSI 50A RC Car ESC 2-3S Sensorless Waterproof Brushless ESC with 4.0mm Bullet & T Plug for 1/10 RC Buggy RC Truck
Main highlights- The waterproof and dust-proof design allows the ESC to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.
- Pre-installed T Plug for the battery and 4.0mm gold connectors for the motor, no soldering is required.
- Multiple protection functions: battery low voltage protection, esc overheat protection, throttle signal loss protection, motor lock-up protection.
- High performance 32-Bit microprocessor supports more powerful processing capability and more accurate motor output, excellent start-up, acceleration and linearity features.
- Be easily programmed with LED Program Card.
4Pcs 20A ESC Brushless Electronic Speed Controller DSHOT BLHeli_S 2-4S Lipo for FPV QAV Drone Multirotor Quadcopter
Main highlights- With BLHeli_S firmware, easy to upgrade or flash via the esc signal cable;The throttle signal cable is twisted pair, which effectively reduces the crosstalk caused by signal transmission..
- The throttle range can be set to be compatible with different receivers, with a smooth and delicate speed control feel.
- The applicable number of battery cells :2-4S;The original components are used to ensure the high-quality current capability of the ESC..
- It is optimized for multi-axis and supports fixed-wing and helicopters well.
- 20A ESC Brushless DSHOT BLHeli_S 2-4S Lipos Electronic Speed Controller for FPV QAV Drone Multirotor Quadcopter
ZTW Mantis Slim Brushless ESC 15A Switch BEC with BEC ouput 2A/5V for F3P Airplane 3D Flying
Main highlights- Supporting high RPM motors and can be promgrammed by the ZTW Beatles series programming card and transmitter .
- Super smooth and accurate throttle linearity and throttle response .
- Strong BEC output up to 2A/5V continuous and peak to 3A. What’s more ,reasonable size and light designing to make it more safe for flying.
- Multiple Protection,such as over temperature protection ,low voltage protection and so on.
- High efficiency with low resistance and low heat MOSFET and CPU.
Readytosky 30A ESC 2-6S OPTO Brushless Electronic Speed Controller for F450 S500 ZD550 RC Helicopter Quadcopter(4PCS)
Main highlights- ★Specifically optimized firmware ESC, the ESC has a very good compatibility.
- ★Highly intelligent, adaptive ability, extremely easy to use;
- ★Continuous Current: 30A Weight: 28.5g.
- ★30A OPTO 2-6S Brushless electronic speed controller.
FPVDrone Waterproof 35A ESC 2~3S Brushless Electronic Speed Controller RC Car Brushless ESC 5V/2A BEC for 1/14 1/16 1/18 RC Car Truck
Main highlights- The strong resistant current capability, excellent heat dissipation.
- Specially designed for 1/18 1/16 1/14 RC car with excellent start-up, acceleration and linearity features.
- Multiple protection features: Low voltage cut-off protection for litium or nickel battery /Over-heat protectionThrote signal loss protection / Motor blocked protection
- Easily programmed and compatible with pocket-sized program card.
- BEC Output: 5.0V/2A(analog mode)
Black Friday Sale
Deal ends in
HrsMinSec