Ender 3 Pei Sheets of 2025
Best Choice1
CrealityCreality Ender 3 Max Neo Bed Upgrade, PEI Sheet 310 x 320mm Removable Magnetic Flexible Texture Surface Heated Bed Plate Build Surface for CR-10S PRO/CR-10 V2/ CR-10 V3/ CR-X/CR-X Pro/Ender-3 Max
Main highlights- 【Wide Application】Compatible with PLA/ PETG/ PEEK/ ABS and any other filaments. 310*320mm spring steel sheet 3d printer bed works well with CR-10S PRO/ CR-10 V2/ CR-10 V3/ CR-X/ CR-X Pro/ CR-10S PRO V2/ Ender-3 Max/ Ender-3 Max Neo and other same-sized beds
- 【Simple Installation】Our PEI steel sheet is easy to install and the installation time is less than 2 minutes. Just need to place the bottom 3M adhesive surface on top of the no-heated bed. The steel PEI plate can be magnetically bonded to the magnetic sticker
- 【Quality assurance】100% Official Creality 3D printer PEI Sheet 310*320mm removable magnetic flexible Texture heated bed platform. Gold PEI surface is of strong high-temperature stability, flame retardant, heat resistance, high strength, wear resistance, and good printing stability
- 【Great Adhesion & Easy Take Mold】Print molds onto PEI build plate frosted texture surface directly. No tape, no more glue, release your printing anxiety. With a magnetic printing PEI sheet plate, you only need to remove it from the bed and bend it, then the mold can be removed. When you let go, they just return back to shape and will not break easily. No need to scratch, pry and damage your prints!
- 【After Sales Support】We provide professional after-sales service. Please kindly contact us(seller) via "ask a question" find us directly cause our customer service will respond to you within 24 hours no matter what the question
9.6Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
Creality13% OffCreality Official Ender 3 S1 Pro Original Build Plate, 235x235mm Texture Surface PEI Sheet Magnetic Removable Flexible Spring Heat Resistance Bed Plate for Ender 3 V3 SE/KE, K1, Ender 3 S1, CR-10 SE
Main highlights- 【Wide Compatibility】- This 3D printer build plate applies to most materials such as PLA, ABS, ASA, PETG, TPU, PC, PA, etc. It is compatible with Ender 3 S1, Ender 3 S1 Pro, K1, Ender 3 V3 SE, Ender 3 V3 KE, Ender 3 V3, CR-10 SE, Ender 5 S1, Ender 3 Series, and other same-sized (235x235mm) beds.
- 【Professional Support】- To ensure your pleasant shopping experience, Creality has a professional customer service team to solve your problems. If you have any problems, please do not hesitate to contact us. We will provide friendly and fast customer service to solve your problem within 24 hours.
- 【Premium PEI Materials】- With heat and wear-resistant, frosted PEI powder coating, the PEI build plate surface is not easy to get scratched or damaged. This Ender 3 S1 Pro build plate has high adhesion to prevent the model from warping while printing, whether at high or low temperatures.
- 【Precise Positioning】- Double handles to prevent burns, positioning holes to assist quick installation, R-angle design on the edge is safer. Furthermore, this Ender 3 S1 Pro bed plate has a strong magnetic force, and it is not easy to dislocate after installation. Strong magnetic stickers help it maintain high adhesion at high temperatures, which ensures better print stability.
- 【Easy Model Removal】- Without using other tools, You can easily remove the printed model by bending the build plate multiple times after printing. The high-quality spring steel bed plate has excellent elasticity and it is not deformed after repeated bending.
9.5Excellent
View offer on:
Show more
3
ComgrowEnder 3 V3 KE PEI Spring Steel 235x235mm, Texture PEI Sheet Magnetic Flexible Heated Bed, Ender 3 V3 SE Build Plate for Creality K1C/K1/Ender 3 V3/Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo
Why we love it
High temperature resistance ensures durability.
Easy model removal with flexible surface.
Compatible with various 3D printers.
9.4Excellent
View offer on:
Show more
4
UNIDOCreality Official PEI Plate with Adhesive for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 pro/Ender 3 neo/Ender 3 v2 neo/Ender 5/Ender 5 Pro 3D Printers
9.7 Easy installation9.3 Attachment8.7 lasts a long timeWhy we love it
Durable with thicker PEI and spring steel.
Excellent adhesion without extra tools.
Easy model removal with flexible surface.
9.2Excellent
View offer on:
Show more
5
HICTOPHICTOP PEI Sheet PEI Spring Steel 235x235 and Magnetic Build Plate with Adhesive PEI Bed for Flashforge Adventurer 5M/ 5M Pro,Ender-3 Pro/Neo,Ender-3 V2/Neo,Ender-3/Neo 3D Printers
Main highlights- 5 The size of HICTOP PEI sheet is 235*235mm（9.25*9.25inch）, it is applicable with Flashforge Adventurer 5M/5M Pro,Ender-3 Pro/Neo, Ender-3 V2/Neo，Ender-3/Neo, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and same sized machines.
- 4 Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it
- 3 Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃
- 2 The Pei Spring Steel 235x235 is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed
- 1 The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with textured PEI surface on one side and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied
9.1Excellent
View offer on:
Show more
6
UNIDO10% OffDouble-Sided Textured PEI Sheet 3D Printer Bed 235x235mm and Magnetic Sticker with Adhesive for Creality Ender 3 V3 KE/SE/Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1-Pro/Ender 5-Pro
Main highlights- Wide Application: This PEI sheet is 235mm x 235mm, applicable to Ender 3 V3 SE/KE, Ender3, Ender3 Pro, Ender3 V2, Ender3 S1, Ender3 S1 Pro, Ender3 Neo, Ender 3 V2 Neo, Ender5, Ender5 Pro and similarly sized FDM 3D printers. The PEI sheet is also compatible with various build plate types, including the Ender 3 build plate, Ender 3 bed plate, Ender 3 magnetic build plate, PEI build plate, Ender 3 glass build plate, and the Wham Bam flexible build plate, available for printing with PLA, PETG, PEEK, ABS or any other filaments.
- Simple Installation: This 3d printer bed is easy to install. Simply stick the magnetic bottom sheet onto your chosen build plate, and then place the steel platform with PEI surface on top. Easily replace an Ender 3 glass bed, or any other type of platform. The PEI sheet is flexible, removable and sticks to magnetics very well.
- More Affordable and Practical: This build plate is made with 75% thicker PEI and 25% thicker spring steel than similar products on the market, providing a more durable plate that can handle the tough conditions of 24/7 printing. The magnet can sustain high temperatures of up to 120°C, making it wear-resistant and scratch-resistant. Besides, it's really easy to clean with a protective film on the surface of the composite coating, which is anti-scratch and dustproof.
- Great Removal: When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. The surface is easy to remove and flexible, allowing prints to come off the surface easily when it reaches room temperature. After the model printing is completed, just remove the upper magnetic surface from the lower, bend the flexible surface, and watch the model fall right into your hands.
- Excellent Adhesion: Our PEI sheet provides excellent adhesion for your prints, allowing them to stick securely to the printing surface while still being easy to remove. You can print directly onto each side of the double-sided sheet without glue or any other adhesives.
8.9Very Good
View offer on:
Show more
7
ENOMAKER20% OffENOMAKER Ender 3 /Pro/V2/Neo PEO PEI Build Plate,Magnetic Print Bed,Diamond Textured Double Sided Flexible Spring Steel Sheet for Creality Ender 5/Pro,Elegoo Neptune 3 Pro 3D Printer 235x235mm
Main highlights- 【What you get】1 double-sided PEO+PEI build plate, 1 magnetic base, and 24-hour after-sales service.
- 【Strong magnetic adhesion】The powerful magnetic stickers maintain their high magnetism even at high temperatures, ensuring printing stability.
- 【Precise Size, But Need to Remove Positioning Screws】To be compatible with Ender 3 V3 SE, Ender 3 V3 KE, Ender 3 V3, K1, K1C, Ender 3 S1,Ender 3 S1 Pro,Ender 5 S1,CR 10 SE, suggest to remove the two positioning screws on the hotbed first.
- 【Perfectly Compatible】Bed sheet dimensions: 235x235mm, perfectly fit for Creality Ender 3, Ender-3S, Ender 3 Pro, Ender 3 V2, Ender 3 Neo, Ender 3 V2 Neo, Ender 5, Ender-5S,Ender 5 pro,CR 20,CR 20 Pro,CP-01,ELEGOO Neptune 3 Pro and other similiar size platform.
- 【Double Sided PEO PEI Ender 3 Build Plate】Both diamond PEO and golden PEI surface feature high-adhesion textures to prevent warping, with PEO diamond also offering a unique texture on the model’s bottom surface.
- 【Bend to Remove Models】The selected spring steel bed plate features high flatness and elasticity, ensuring easy model removal and resistance to deformation, even after repeated bending. No tape, glue, or shovel is needed, reducing printing anxiety.
- 【 High-temperature compatibility】PEO ≤ 120℃, recommended for printing PLA, PETG, and TPU. PEI ≤ 300℃, recommended for printing PLA, ABS, ASA, PETG, TPU, PC, PA, etc. Magnetic base ≤ 110℃.
8.8Very Good
View offer on:
Show more
8
HzdaDeveHzdaDeve Textured PEI Sheet and Smooth PEO Build Plate 235x235mm Spring Steel Print Bed for K1/Ender 3 V3 SE/Ender 3 V3 KE/Ender 3 S1 Pro/Ender 3 V2 Neo/Sovol SV05/SV06/SV07 (PEO+PEI)
Main highlights- Package Includes: PEI and PEO sheet without adhesive magnetic sticker, the bed sheet size is 235x235mm. (Not include magnetic base)
- PEO+PEI Design: One side is a textured PEI bed which presents the frosted sticker surface with a distinctive frosted touch. Another side is a smooth diamond PEO sheet which is easy to remove and clean. The PEI bed can be resistant to 200°C for the nozzle without deformation.
- It's easy to remove the prints when the PEI sheet 235x235 cools down to around 40°C. If it's stuck, please gently bend the build plate to pop it off.
- Excellent Flatness: It provides the most flat build surface in the market, ensuring high flatness for the bottom of print, to make sure the model can be firmly attached to the surface of the print platform.
- Compatible Printer: This 235X235mm PEY+PEI bed is compatible with Elegoo Neptune 3 Pro/Neptune 4/Neptune 4 Pro/K1/Ender 5 S1/Ender 3 S1 Pro/Ender 3 S1/Ender 3 V2 Neo/Ender 3 V2/SV05/SV06/SV07 3D Printer.
8.7Very Good
View offer on:
Show more
9
CrealityCreality Official Ender 3 V3 SE Build Plate Spring Steel Platform Plate Kit Textured PEI Sheet 235x235mm for Ender 3 Pro/Ender 5 Pro/Ender-3 S1 Pro/Ender-3 V2 Neo/Ender-3 V3 KE//K1/K1C 3D Printer
Main highlights- Strong magnetic adhesion,resistant to displacement: Powerful magnetic stickers are used to maintaiin high magnetism even at high temperatures,to ensure printing stability
- High flatness,easy demolding: High-flatness spring steel sheet with excellent elasticity,remains undistorted after repeated bending,facilitating demolding
- High adhesion,stable molding: Thin spring steel sheet with surface adhesion to high-adhesion materials,to reduce inertia during platform movement for smoother 3D printer operation
- Compatible Printet: Fit for 3D printers with a platform size of 235×235mm,like Ender 3/ Ender 3 S1/ Ender 3 v2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro/CP-01/CR-20/CR20 Pro/Ender 3 S1 Pro/Ender 5/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/Ender 3 V3 KE/CR-10 SE/K1 and other same-sized beds.
- Before the initial use, please align and attach the magnetic sticker to the printer's heated bed in the correct direction and position. Subsequently, the PEI sheet can be magnetically attached to the heated bed through the magnetic sticker. Do not forget to leave the protective film on the PEI sheet before print
8.5Good
View offer on:
Show more
10
Creality15% Off3D Printer Powder Painted PEI Flexi Steel Magnetic Build Plate 235 * 235mm for Creality Ender 3 S1 Pro,Ender 3,Ender 3 Pro,Ender 3 Neo,Ender 3 V2,Ender 3 V2 Neo, Ender 5,Ender 5 Pro
Main highlights- Two-in-one type of PEI powder coated hardended steel spring sheet nerver disforming, Magnetic base with strong magnetism
- Size: 235mm x 235mm.
- No more tape, no more glue, no more shovel, and release your printing anxiety
- Easy to install, easy to remove the models by bending or popping it off
- Compatible with Ender 3, Ender 3 Pro, Ender 3X, Ender 3 V2, Ender 5 ,Ender 5 Pro ,CR 20 Pro. Aquila X2.
8.4Good
View offer on:
Show more
Similar products on Amazon
