10 Best End Milling Cutter Hrc50 In The Us - Black Friday 2024
Best Choice1
zouzminzouzmin 2inch R8-FMB22 Face Mill Arbor and BAP400R 50-22-4T 50mm/1.96" Face Milling Holder CNC End Mill Milling Shell Cutter with 10pcs APMT1604PDER R0.8 Shank Carbide Inserts
Main highlights- R8 FMB22 Face Mill Arbor--Made from alloy steel hardened to HRC 52-56,For shoulder milling, face milling and slotting,7/16-20 thread on the draw bar
- Package list:1pcs 2" R8-FMB22 face mill arbor + 1pcs 400R 50-22-4T Milling holder + 10pcs APMT1604PDER BP010 carbide inserts + 1pc T15 Wrench
- Dual-edge APMT1604 PDER R0.8 :Coating: CVD , APMT1604PDER are coated by NANO blue coating,Material: Carbide, I.C(d): 0.366", Thickness(s): 0.187",Hole(d1): 0.173",Nose radius(r): 1/32",Nose Angle: 85°,Relief Angle: 11°,Good for both finishing and roughing;
- Application: this kind of APMT1604 milling inserts are especially suitable for processing hard steel parts (eg. 4140 alloy steel ) and stainless iron, suitable for material of HRC35 °- HRC50°ï¼Œperform pretty well on quenched harden steel.
- 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
LingGan2 Inch Face Milling Cutter Aluminum KM12 50MM CNC End Milling Cutter Holder + R8-FMB22 Shank Face Shell Mill Arbor + 4pcs SEHT1204 Carbide Inserts + 8mm Hexagon Wrench + T20 Wrench CNC Machine Tools
Main highlights- Tight Seam, Strong Compression Force: Screw Offset Fastening Design, So That The Blade Position Slot And Blade Closely Fit, Processing Is Not Easy To Shake, Reduce Damage To The Machine Tool
- Stable Performance Of Gold Plating Process: The Cutter Head Surface Adopts New Thin Coating Gold Plating Process, Which Has Good Oxidation Resistance, High Temperature Resistance And More Durable
- Precision Design And Accurate Tool Position: The Precision Design Of Blade Position Ensures The Accuracy Of The Blade Position. After The Blade Is Installed, It Is Flat And Consistent With The Cutter Head, So As To Avoid Uneven Force On The Blade During Processing, And Easily Solve The Chatter Of Spring Knife
- Insert The Tooth Sleeve To Avoid Sliding Wire: The Stainless Steel Tooth Sleeve Is Inserted In The Screw Tooth Position Of The Cutter Head, Which Can Effectively Prevent The Thread Sliding Problem Of The Cutter Head Screw Tooth
- High Quality Material Selection And Load Reduction: It Adopts Aviation Aluminum Alloy Raw Material, Which Is Light And Stable, Effectively Reduces The Spindle Load, Greatly Delays The Service Life Of Milling Machine, And Can Process Aluminum Alloy Mold Quickly
9.7Exceptional
View offer on:
Show more
3
XHCNCTXHCNCT HRC50 3Flutes Tungsten Solide Carbide Roughing End Mills for Cutting Aluminium with no Coating CNC Router Bit Wood Metal milling Cutter Shank Dia 1/4 inches (1pc, 1/4" x1/4"x3/4"x2")
Main highlights- 4.Easy to operate: inch standard size, easy to install and adjust, reduces operational difficulty, and improves work efficiency.
- 3.Widely applicable: suitable for rough machining of various metal materials, such as steel, aluminum alloys, etc., with strong versatility.
- 2.Strong durability: Made of high-quality alloy materials, it has good wear resistance and impact resistance, extending its service life.
- 1.Efficient cutting: The roughing milling cutter adopts a wide blade design, which can quickly remove a large amount of material and improve production efficiency.
9.6Exceptional
View offer on:
Show more
4
AUTOTOOLHOMEAUTOTOOLHOME 3/16" Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/16 in)
Main highlights- This 3/16 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications
- HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance
- End Mill router bits are used for side milling, end milling, finish machining, etc.
- Carbide milling bits Diameter: 3/16'', Shank Diameter: 3/16'', Flute length: 5/8'', Overall Length: 2", 4 Flutes
- AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron
9.5Excellent
View offer on:
Show more
5
uxcelluxcell 3pcs 3mm Dia 3mm Shank Square Nose End Mill 4 Flutes HRC50 Carbide AlTiN Coated CNC Router Bits Cutter Tools for End Milling CNC Machining
Main highlights- Widely Applications: Suitable for cutting carbon steel, malleable cast iron, alloy steel, die steel, etc. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- Square Nose End Mill: Cutting Diameter: 3mm / 0.12"; cutting flute length: 8mm / 0.31"; shank diameter: 3mm / 0.12"; overall length: 50mm / 1.97"; cutting hardness: HRC50; spiral angle: 35 degree.
- Solid Carbide: The milling cutter is made of tungsten steel (carbide), which has a series of excellent properties such as high hardness, wear resistance, good strength and toughness, heat resistance, and corrosion resistance. These properties extend tool life and keep end mills edge blades, helping to improve cutting accuracy and efficiency.
- Feature: The helix angle of this milling cutter is 59 degrees. It provides the best cutting effect and improves chip removal during cutting, thereby improving cutting efficiency and surface quality. This angled design can also reduce the load on cutting and machine tools during processing, improve heat dissipation performance, and extend the service life of cutting tools and equipment.
- AlTiN Coating: The surface treatment uses AlTiN coating, which has high hardness, making the tool surface resistant to cutting forces and wear, extending service life; secondly, it also has excellent wear resistance and heat resistance, thereby reducing cutting forces , Improve cutting speed and efficiency, so that the tool maintains stable performance; in addition, the AlTiN coating surface has good lubricity, which can reduce the adhesion of chips between the tool and the workpiece, which help
9.3Excellent
View offer on:
Show more
6
uxcelluxcell 10mm Dia 10mm Shank Square Nose End Mill 4 Flutes HRC50 Carbide AlTiN Coated CNC Router Bits Cutter Tools for End Milling CNC Machining
Main highlights- Widely Applications: Suitable for cutting carbon steel, malleable cast iron, alloy steel, die steel, etc. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- Square Nose End Mill: Cutting Diameter: 10mm /0.39"; cutting flute length: 30mm /1.18"; shank diameter: 10mm / 0.39"; overall length: 75mm / 2.95"; cutting hardness: HRC50; spiral angle: 35 degree.
- Solid Carbide: The milling cutter is made of tungsten steel (carbide), which has a series of excellent properties such as high hardness, wear resistance, good strength and toughness, heat resistance, and corrosion resistance. These properties extend tool life and keep end mills edge blades, helping to improve cutting accuracy and efficiency.
- Feature: The helix angle of this milling cutter is 60 degrees. It provides the best cutting effect and improves chip removal during cutting, thereby improving cutting efficiency and surface quality. This angled design can also reduce the load on cutting and machine tools during processing, improve heat dissipation performance, and extend the service life of cutting tools and equipment.
- AlTiN Coating: The surface treatment uses AlTiN coating, which has high hardness, making the tool surface resistant to cutting forces and wear, extending service life; secondly, it also has excellent wear resistance and heat resistance, thereby reducing cutting forces , Improve cutting speed and efficiency, so that the tool maintains stable performance; in addition, the AlTiN coating surface has good lubricity, which can reduce the adhesion of chips between the tool and the workpiece, which help
9.0Excellent
View offer on:
Show more
7
uxcelluxcell Carbide Square End Mill, 3/8" Dia AlTiN BN Coated 2 Flutes Milling Bit Cutter, for Hardened Steel Cast Iron Alloy Metal, 3/8" Shank 1" Cut Length 2-1/2" Long HRC50
Main highlights- Wide Applications: Mill bit can create slots (keyways or internal grooves), straight or square edge features, flat smooth surfaces, holes or for roughing, finishing and side milling operations. Suitable for machining hardened materials, cast iron, high-temperature alloys, aluminum, and non-ferrous metals.
- Tips: Use on standard milling machines, CNC machining centers, engraving machines. Make sure the end mill is suitable for the specific application and material being processed. Use a suitable coolant or lubrication method. Select an appropriate feed rate and cutting speed.
- Square End Mill Size: Cutting diameter: 3/8"; shank diameter: 3/8"; cutting length: 1"; total length: 2-1/2"; number of flutes: 2 flutes; end cut type: square end; cutting direction: right hand; cutting hardness: HRC50
- Special Coating: Aluminum Titanium Boron Nitride coating combines the advantages of both AlTiN and BN coatings. Offers superior thermal stability, reduced friction, and improved wear resistance compared to AlTiN. Micro grain carbide milling cutter offers high hardness, wear resistance, enhanced rigidity and excellent heat resistance.
- Features: Precision ground cutting edges allow for clean, precise cuts, resulting in accurate machining and excellent surface finish. Up-cut spiral flutes lift chips upward and away from the cutting area. Large spiral design helps effectively remove chips during cutting.
8.8Very Good
View offer on:
Show more
8
HunrichoHunricho 2PCS 1/2'' Carbide Square End Mill Bits Set, Milling Bits Cutter 1/2 Carbide End Mills for Alloy Steels/Hardened Steels, HRC 45 Deg Single End 4 Flute AlTiN Coating (2PCS 1/2in)
Main highlights- Package Included: 2pcs 1/2" carbide square end Mill
- Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel.
- HRC 45 deg :carbide end mill tools excel at working carbon steels (~ HB225), alloy steels (HB225 ~ 325), pre-hardened steels (up to HRC45), hardened Steels (HRC40 ~ 45), cast iron.
- Flutes:4 Flutes,high rigidity ,widely used in shallow slot,profile milling,and finish machining.
- Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance.
8.6Very Good
View offer on:
Show more
9
XuulanXianglaa-Router bit, Ball Nose End Mill 2 Flutes R0.5-R6.0 CNC End Milling Cutter Hrc50 Coated End Mills 1pc, (Cutting Edge Length : 1PC P2B R5.0)
Main highlights- Heat-resistant coating baking to prevent the accumulation of wood chips, resin and asphalt.
- Carbide Tipped, Micro grain grade provides increased strength and utmost resistance.
8.5Good
View offer on:
Show more
10
TiiyeeFace End Mill Set, High Speeds End Mill Cutter Holder Extension MT2 FMB22 Carbide Indexable End Mills 400R 50 22 CNC Lather End Milling Cutter with 10 Pcs APMT1604 Carbide Inserts
Main highlights- [Sturdy and Durable]: End mill holder , The end face CNC milling cutter is made of hard alloy, which has high hardness and good impact resistance. The surface of the fly cutter for milling machine adopts new coating technology, has good oxidation resistance and high temperature resistance, and can be used for a long time
- [Machining Range]: New coating technology is adopted on the surface, which has good oxidation resistance and high temperature resistance, a milling machine can be used for a long time; precision machining, rough machining, plane processing, and step processing
- [Increase the Service Life]: Hardening and hardening High precision shock resistance, good permeability, resistance to multiple impacts, good low temperature impact toughness, power milling machine accessories is sturdiness and durability, which can increase the service life and shock resistance of the cutter head
- [Cutting Labor and Can Mill the Step Surface]: The milling cutter disk has the advantages of cutting labor and can mill the step surface. During milling, the stress points are along the direction of rotation of the milling cutter, and the downward force is small, and the product is not easy to deform when milling thin strip products
- [3 Times Faster]: Indexable end mill is made of cemented carbide, which has high hardness with good impact resistance; It is an ideal tool kit for heavy CNC milling; rotation and milling feed speeds are 3 times faster than normal milling cutters
8.3Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for end milling cutter hrc50
