10 Best Encoder Rotary Magnetic In The Us - Black Friday 2024
Best Choice1
TaissTaiss/AB 2 Phase Incremental Rotary Encoder 100P/R DC 5-24v Wide Voltage Power Supply 6mm Shaft 100P/R
Main highlights- This incremental rotary encoders Exquisite workmanship ,Quality assurance for 1 years. If there are quality problems within 1 years, you can send us email. We will send you new ones .
- Product Name: incremental rotary encoders 100P/R , AB two phases.AB two -phase quadrature output rectangular pulse, the circuit output is NPN open collector output type .
- Package content：1 x Incremental Rotary Encoder ；Net Weight : 130g;
- Encoder size ： Encoder size: 38 x 35.5mm/1.49" x 1.39" ；Shaft: 6 x 15mm/0.23" x 0.59"；Axis stopper platform: High 5mm, 20mm；Power source: DC 5-24V；Maximum mechanical speed: 6300 R / min.
- Connection: white = A phase, Green = B phase, red = power +, black = V0 ； Note: AB two -phase outputs must not be connected directly to VCC, otherwise, they will burn the output transistor.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
OumefarOumefar AS5048A High Accuracy Magnetic Encoder PWM/Serial Peripheral Interface Port Magnetic Encoder Module Magnetic Induction Angle Measurement Sensor Module
Main highlights- 【SUITABLE SHAFT APPLICATION】: The Magnetic Encoder is suitable for shaft applications where a simple two-pole magnet rotates the sensor IC or below and the 0 position can be programmed into the device with simple SPI commands, and the absolute magnetic angular position resolution is 14 bits.
- 【ROTARY POSITION SENSOR】: The AS5048A Magnetic Encoder is a 14-bit rotary position sensor (formerly called encoder) for absolute angle measurement and PWM (= pulse width modulation) at 360 degree based on non-contact magnetic sensor technology full-rotation output.
- 【PROVIDE OUTPUT INTERFACE】: AS5048 Magnetic Encoder provides PWM output and SPI or I2C interface to provide absolute angle measurement for the microcontroller. In the mechanical designing, there is no need to consider the exact pairing of the initial 0 position of the chip and the magnetic poles.
- 【HIGH OPERATING TOLERANCE】: AS5048 Magnetic Encoder also has a very high operating tolerance, including the deviation of the center position between the chip and the paired magnet, the deviation of the air gap between the chip and the paired magnet, and the temperature change between -40°C and +150.
- 【AFTER SALE SERVICE】: We are committed to bringing you a comfortable experience. If you have any questions about this AS5048 Magnetic Encoder, please feel to us immediately,and we will serve you wholeheartedly.
9.7Exceptional
View offer on:
Show more
3
UMLIFE3pcs AS5600 Magnetic Encoder Magnetic Induction Angle Measurement Sensor Module 12bit high Precision
Main highlights- Size: approx. 23x23mm(0.91x0.91in)
- Package includes: 3 x Magnetic Encoder
- Non-contact magnetic induction angle measurement module.
- High precision, a variety of output modes:IIC,PWMAnd voltage
- AS5600 Magnetic Encoder Magnetic Induction Angle Measurement Sensor Module 12bit high Precision
9.5Excellent
View offer on:
Show more
4
WWZMDiBWWZMDiB 4Pcs AS5600 Magnetic Encoder 3.3V 12bit high Precision Magnetic Induction Angle Measurement Sensor Module，Mainly Used to Obtain Information Such as Progressive Motor Speed
Main highlights- AS5600 magnetic encoder is often used to measure the angular displacement of a motor.
- 【Out mode】：IIC ,PWM, voltage, etc.
- 【Product type】：Non-contact magnetic induction
- 【AS5600 Magnetic Encoder】：This module is mainly placed behind the stepper and then stick a magnet on the main shaft of the stepping motor. Information such as the rotation speed of the spindle can be obtained through magnetic encoding.
- 【Supply Voltage】: 3.3 V
9.3Excellent
View offer on:
Show more
5
TaissTaiss / 5Pcs KY-040 Rotary Encoder Module with 15×16.5 mm with Knobs Cap
Main highlights- Working voltage: 5V; One round number of pulse: 20
- With the key on the rotary encoder, you can reset to the initial state, that is, counting from 0
- The rotary encoder can count the number of pulse output during rotation in the positive direction and reverse direction through the rotation and this rotation counts are not limited
- The Material of Knob Cap: aluminium alloy；The Specification of Knob Cap: diameter: 15mm/ 0.59in; height: 16.5mm/ 0.65in
- Package content: 5pcs x Rotary Encoder Module + 5pcs black Knob .
9.2Excellent
View offer on:
Show more
6
Teyleten RobotTeyleten Robot AS5600 Magnetic Encoder 12bit high Precision Magnetic Induction Angle Measurement Sensor Module 3.3V (5PCS)
Main highlights- With Diametric Magnets and pin header
- VCC ： 3.3V;GND ：Power Ground;Out ： PWM /Analog voltage output
- SCL ： IICThe communication clock line;SDA ： IICData communication line
- GPO ： Mode selection (internal pull ground=Programming modeB)
- DIR ： Rotational direction (ground=Value increases clockwise; thenVCC =Clockwise values are decreased)
9.1Excellent
View offer on:
Show more
7
CHANCSCHANCS Permanent Magnet DC 775 Motor Resolution 16PPR AB Phase Hall Magnetic High Precision Encoder Brush Motor Encoder
Main highlights- 【Size:】 Shaft diameter: 5mm; Resolution: 16PPR; Working frequency:100KHZ; According to the motor diameter size and spindle size production, The PCE plate and the motor are equipped with sensors, the tail electrode is welded and fixed, and the magnetic grid is set on the tail shaft.
- 【Package:】1×Encoder
- 【Note:】 1. Each set of magnetic encoder contains a magnetic grid and magnetic sensitive detection circuit, DC motor and control circuit are not included. 2. Pay attention to the wiring of the encoder, if the wrong connection will cause the chip to burn. 3. The actual product shall prevail.
- 【Motor installation requirements:】Dual-axis DC motor, tail shaft length > 8mm, motor end piece length > 1mm.
- 775 Motor AB Phase Hall Magnetic Encoder is a high performance, low cost, two channel incremental Type magnetic encoders, suitable for any harsh environment, each magnetic encoder contains a magnetic grid And a magneto-sensitive detection circuit that outputs two channels with a quadrature phase angle of 90° square wave.
8.9Very Good
View offer on:
Show more
8
AlinanAlinan 6pcs AS5600 Magnetic Encoder 12bit 3.3V High Precision Magnetic Induction Angle Measurement Sensor Module
Main highlights- 【VCC】: 3.3V; GND: Power Ground; Out: PWM/Analog voltage output
- 【SCL】: IIC The communication clock line; SDA: IIC Data communication line
- 【Package Included】: 6*Magnetic Encoder with Magnet and Pin Header
- 【GPO】: Mode selection (internal pull ground=Programming modeB)
- 【DIR】: Rotational direction (ground=Value increases clockwise; thenVCC =Clockwise values are decreased)
8.8Very Good
View offer on:
Show more
9
MELIFEMELIFE 6pcs AS5600 Magnetic Encoder Magnetic Induction Angle Measurement Sensor Module 12bit high Precision
Main highlights- Package included: 6*AS5600 magnetic encoder module with magnet and pin header
- It is made of KB-A grade FR-4 glass fiber board with a thickness of 1.6mm. The board surface is flat and not easy to be bent.
- High precision, a variety of output modes:IIC,PWM And voltage.
- AS5600 is also equipped with an intelligent low power consumption mode, which automatically reduces power consumption.
- AS5600 12Bit Magnetic Encoder Non-contact magnetic induction angle measurement module.
8.7Very Good
View offer on:
Show more
10
DIANNDIANN 5pcs AS5600 Magnetic Encoder 12bit 3.3V High Precision Magnetic Induction Angle Measurement Sensor Module with Cable
Main highlights- Product Type: Non-Contact Magnetic Induction Angle Measurement Module,High Precision
- Multiple Output Mode: IIC,PWM,Voltage,etc.
- It is Made of KB-A Grade FR-4 Glass Fiber Board with A Thickness of 1.6mm.The Board Surface is Flat and Not Easy to be Bent.Each PCB Board has Been Tested by Flying Probes before Leaving the Factory and the Quality is Worth Relying On
- AS5600 is Also Equipped with an Intelligent Low Power Consumption Mode,Which Reduces Power Consumption Automatically,The Input Pin(DIR) Select Output Polarity Rotation Direction
- AS5600 Magnetic Encoder: VCC: 3.3V ; GND: Power Ground ; OUT: PWM/Analog Voltage Output
8.6Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for encoder rotary magnetic
