10 Best Electronic Current Load 150 In The Us - Black Friday 2024
Siglent Technologies SDL1020X-E Programmable DC Electronic Load,1 Channel,150 V/30 A, 200 W
Main highlights- SDL1020X-E (Single channel ): DC 150 V/30 A, total power up to 200 W
- List function supports editing as many as 100 steps
- CC Dynamic mode: 25 kHz, CP Dynamic mode: 12. 5 kHz, CV Dynamic mode: 0. 5 Hz
- Adjustable current rise time range: 0. 001 A/us~2. 5 A/us
- 4 static modes / Dynamic mode: CC/CV/CR/CP
- Curious about how we select the top products for you? Explore How It Works
Tekpower TP3710A Programmable DC Electronic Load, 150 Watts, Low Ripple
Main highlights- Over voltage / over current / over power / over heat / polarity reversion protection
- LCD display with backlight + AC 120V/220V selectable
- High accuracy, resolution and precision instrument, calibration certificate included
- Constant current / constant power / Constant resistance mode
- 150 Watts DC electronic load with programmable PC USB interface, software included
MakerHawk Electronic Load Tester - USB Load Tester 150W 200V 20A Resistor Adjustable Constant Current Battery Capacity Tester Module Intelligent Dischar
Main highlights- Voltage measurement range: 0.00V ~ 200V, Current measurement range: 0.00A ~ 20A.
- Two power supply methods: 1. DC6-12V DC5.0 power supply; 2. DC6-12V Micro USB power supply.The body discharge power cannot exceed 150W, otherwise there is a risk of burnout.
- Prevent burning warning: when the input voltage battery and large power test, access must be beforeusing two current adjustment knob counterclockwise to the minimum to zero, then the access, accordingto the priority according to current power to slowly adjust current knob, must not instantly transferred infull, so there are excessive instantaneous power load discharge tube burnt huge risk! Please use thespecial attention to this point, thank you!
- How to operate: Set the capacity, power, time using the Keystrokes method Reset:1. Reset button Long all data (mAh, Klitschko, 00: 00: 00); 2. Fast button twice capacity reset (mAh); 3. Fast button three power reset (ㅁ);4. Fast button Four time reset (00:00:00); 5. Fast button five settings auto standby, Discharge count down regularly; 6. No load output No load, fast seven key, And current zero zero current, Environmental temperature Accurate calibration.
- 150W power refers to: In accordance with the power calculation formula P = UI (power = voltage x current); 10V input Approximately 18A discharge current 20V input Approximately 9A discharge current 30V input Approximately 6A discharge current.
KKnoon 150W 20A Adjustable Constant Current Electronic Load 2.4inch TFT Color Display 4 Working Modes USB Lithium Battery Capacity Monitor Tester Discharge Meter
Main highlights- ️Voltage, current and power overrun protections can be set; stop discharge voltage and discharge time can be set.
- ️This product is a direct current CNC electronic load, with a maximum power of 150W and a maximum load current of 20A. Support test the capacity of power battery.
- ️Power supplying temperature can be monitored by an external NTC sensor.
- ️It has four working modes design, constant current mode, constant voltage mode, constant power mode and constant resistance mode.
- ️2.4inch TFT color screen, with voltage, current, power, electricity, capacity, internal resistance, load, operating mode, OVP, OCP, OPP, stop voltage, time limit discharge display function.
Electronic Load Tester Battery Capacity Tester USB Load Tester 150W 200V 20A Resistor Adjustable Constant Current Intelligent Discharge Resistance Power Tester
Main highlights- 【Versatile Multimeter】This multifunction constant current electronic load can measure voltage, current, power, battery capacity, impedance, temperature, energy, time. Test various batteries, DC power supply, and charging data lines.
- 【Tech Parameters】Voltage measurement range 0-200V, current measurement range 0-20A, power range 0-150W, refresh time > 500mS / times, measurement rate about 0.5 times / sec.
- 【Safe&Reliable】The CPU fan is designed to dissipate the heat, and the protection of overvoltage, overcurrent and overpressure can protect the module from damage.
- 【Prevent Burning Warning】Please adjust the 2 current knobs to the end counterclockwise before using, and then slowly adjust them!
- 【How to Operate】Set the capacity, power, time using the Keystrokes method Reset:1. Reset button Long all data (mAh, Klitschko, 00: 00: 00); 2. Fast button twice capacity reset (mAh); 3. Fast button three power reset (ㅁ);4. Fast button Four time reset (00:00:00); 5. Fast button five settings auto standby, Discharge count down regularly; 6. No load output No load, fast seven key, And current zero zero current, Environmental temperature Accurate calibration.
- NOTE: The color of the upgraded CPU fan is red, and all the functions remain the same!
Adjustable Constant Current Electronic Load - 150W USB Electronic Load Battery Capacity Tester USB Resistor Load Multimeter Voltage Current Tester Voltmeter Meter Amperage Reader 0.2-25A 2-200V
Main highlights- Ultra-high precision: The precision is strictly calibrated by the engineers at the factory, and the patented soft calibration technology is adopted. The software learning precision is carried out through the large instrument, and the small error caused by the hardware is repaired through the software, so that the measurement precision can reach the same level. Exactly the same precision for larger instruments
- Two power supply modes: 1. DC6-12V DC5.0 power supply; 2. DC6-12V Micro USB power supply. The discharge power of the fuselage cannot exceed 150W, otherwise there is a danger of burning out. Voltage measurement range: 2V ~ 200V, current measurement range: 0.2A ~ 25A
- Safe to use: You can set the timing discharge and stop voltage, with over-power protection and high temperature protection, battery temperature measurement and protection, with fuse and reverse connection protection functions
- New upgrade: The electronic load is connected to the USB interface of the computer, and then the online software driver of the upper computer is installed, and the software can be used online after opening the software. Online background settings are synchronized with load host settings
- Four-tube discharge design: The heavy-cost multi-tube current is evenly shunted and synchronous discharge technology is adopted, so that a larger current can be used for long-term stable operation at low voltage and high current, and the anti-burning safety of the discharge tube during high-voltage discharge has been breakthrough at the same time. The improvement of the performance makes the overall technical index performance of the equipment reach a higher leap
Electronic Load Tester, USB Load Tester 150W 200V 20A Adjustable Constant Current Electronic Load Battery Capacity Tester Module Power Meter, Intelligent Discharge Resistance Power Tester
Main highlights- USB LOAD TESTER: This multifunctional constant current electronic load can measure voltage, current, power, battery capacity, impedance, temperature, energy, and time. Test various batteries, dc power supplies and charging data cables
- SAFE USE: Voltage monitor, Load maximum power 150w, maximum voltage 200v, maximum current 20a. Overvoltage, overcurrent and overvoltage alarms can effectively protect the module from damage
- LCD SCREEN: Electronic load electric tester, display information is comprehensive and clear. The cpu fan can effectively dissipate heat. Equipped with smart fans, it can effectively and quietly dissipate heat
- ELECTRONIC LOAD TESTER: Voltage measurement range: 0.00v~200v, resolution accuracy: 0.01v. Current measurement range: 0.00a~20a, resolution accuracy: 0.01a. Refresh time:> 500ms/time measurement rate: about 0.5 times/sec
- BATTERY CAPACITY TESTER: Over current setting alarm mode display the alarm interface to remind the user. The setting range of overpressure warning: 1~200v. Lowvoltage reminder setting range: 0~190v. Overflow reminder setting range: 0.2~100a
MakerHawk Battery Load Tester - 150W 200V 25A USB Load Tester 4-Wire System Adjustable Constant Current Voltage Discharge Lithium Battery Capacity Tester Electronic Load Tester
Main highlights- Powerful Performance & Intelligent Cooling: This lithium battery tester has a high voltage of 200V, current of 25A, and power of 150W. Equipped with an intelligent fan, strong airflow and low noise, it can extend the service life and support continuous operation of long-term discharge or aging tests.
- Multi-function & App Compatibility: The USB load tester supports constant current, constant power, constant resistance and constant voltage modes, measuring internal resistance, measuring power supply, measuring line resistance, etc. Support computer software viewing and setting.
- Multi-Device Compatibility & Safety Features: This battery capacity tester supports discharge aging tests for a wide range of devices, including chargers, cables, power banks, batteries, and power adapters. It has intelligent safety protection such as overload, overcurrent and high temperature protection, real-time monitoring of status makes it safe and reliable.
- High Precision & Upgraded Four-Wire System: Utilizing a four-wire connection, this voltage tester ensures accurate voltage measurements unaffected by wire resistance and its measurement accuracy is comparable to that of large professional instruments. It is also compatible with two-wire connection.
- 2.4" Large Screen Battery Load Tester: Featuring a high-definition color screen, this electronic load tester provides clear and precise readings. It offers comprehensive parameter, settings and operations, including voltage, current, power, resistance, capacity, electricity, temperature, time-limited discharge, stop voltage and current, etc., to ensure accurate and reliable results.
Electronic Load Tester 400W 150V 40A Programmable DC Battery Capacity Load Detector Constant Current Voltage USB Testers for Power Supply Switch Charger
Main highlights- {Operation}: Easy to operate and handle with 2.8 inches TFT screen(0-150 V, 0-40A, 0-400W)
- {Function modes}: Provide Battery test, LED test, Dynamic test, Scanning test, List test, Battery/ Power supply internal resistance testing
- {Communication}: Provide USB Port and device protection functions
- {6 basic measurement modes}: Constant Current, Constant Voltage, Constant Resistance, Constant Power, CC+CV, CR+CR
- Note: Providing complete after-service by factory after your purchase. Welcome for any question through Amazon Message!
Single Channel Electronic DC Load Tester Battery Capacity Tester RS485/232 150V 40A US Plug (400W)
Main highlights- Protection function: With over voltage, over current, power supply, over temperature protection function, low voltage remote measurement function;
- Multi-test function: low 10 KHZ dynamic test function; low battery capacity test function; low battery internal resistance test function; low overcurrent protection point/time test function; low fan PWM control, power switch power supply 110VAC/220VAC switching use.
- Load mode: Low CC, CV, CW, CR four basic load modes, low input or reverse connection protection and alarm, with multiple load online synchronous operation
- High precision and high stability: Optimized heat dissipation structure, high power density and digital control mode, higher precision, good stability, RS485, 232 communication interface, MODBUS protocol.
- Automatic test function: with external I / O trigger signal, PASS, FAIL command, powerful interface friendly PC software support.
Black Friday Sale
Deal ends in
HrsMinSec