10 Best Dual Mic Preamplifier In The Us - Black Friday 2024
Focusrite ISA Two Classic rackmount dual mono mic preamp with variable impedance selector and high-pass filter per channel
Main highlights- Variable input impedance: Four choices of input impedance, including the original ISA 100 value, allow you to match the preamp to your microphone, even if it's a vintage type, giving you the best possible sound.
- Variable cut-off high-pass filter: Built in, and easily accessed with its own large knob and illuminated button, is an extremely smooth sounding 18dB/octave high-pass filter of the same design as the original ISA 110 module.
- User-calibrated metering: Each channel has an eight-LED array to clearly display the level of your two signals. Line up your ISA Two levels to match your DAW converters with the calibration knob on the rear panel.
- Two 1/4in. jack sockets on the front panel of ISA Two give you instant access to a transparent DI input. TRS line inputs are available on the rear panel too, and you can step through them instantly to select the one you want.
- The much-heralded ISA topology also ensures low noise, even at the highest gain levels. The transformer supplies 20 dB of gain, while ISA's input stage offers up to 60 dB in addition, giving a total of up to 80 dB of maximum gain on the microphone input.
- Rear panel balanced inserts: Each channel of ISA Two has its own balanced insert point. With 1/4in. TRS send and receive connections, your choice of signal processor can be connected and switched in and out using the illuminated switch on the front panel.
- Lundahl LL1538 mic input transformer: Rupert Neve originally chose the Lundahl LL1538 to be the input transformer on the ISA 110. It remains the best microphone input transformer available, and is used in every ISA Series mic pre.
- Curious about how we select the top products for you? Explore How It Works
MB-2 Dual Channel Microphone Preamp Booster, Dynamic Microphone Preamplifier for Podcast, Livestream, and Broadcasting
Main highlights- USES 48V PHANTOM POWER: Two-channel dynamic mic preamplifier that uses 48V phantom power to add 25dB of clean gain to dynamic and ribbon microphones while dropping the noise floor to an astonishing -70dB. (Note: phantom power is required and must be supplied by your audio interface or an external 48v power supply. The MB-2 does not supply phantom power).
- PROFESSIONAL SOUND CLARITY: with -70dB noise rating you'll be able to cut through the mix without adding feedback or unwanted hiss and hum.
- MIC PREAMP FOR STUDIO AND BROADCAST RECORDING: Boost the signal of quiet instrument sources like vocals, percussion or acoustic instruments, while maintaining the natural sound of your microphone. (DOES NOT WORK WITH CONDENSER MICROPHONES)
- LIVE SOUND AT ITS BEST: The MB-2 preamp is durable enough for the stage and quiet enough for the studio. For live sound, you can reduce line noise on long cable runs and improve the gain before feedback ratio for public speakers or singers.
- DESIGNED FOR OUTSTANDING RESULTS: Coda’s microphone booster is perfect for podcasts, live streaming, radio broadcasts, live sound, and studio recording. You need great tools to get great results!
ART USB Dual Pre Two Channel Preamplifier/Computer Interface (USBDUALPREPS),Black
Main highlights- Works with the USB audio device drivers built into Windows 98SE/ME/2000/XP/Vista and Apple OS9.1/OSX computers with native USB support
- USB Dual Pre is powered via the USB bus. Internal 9 Volt battery, or optional external 12V power supply (or any combination of USB, battery & power supply) can be used depending on application. When running powered by battery alone, you should expect in excess of 50 hours of operation with phantom power off. Battery life will drop to approximately 20 hours (depending on microphone) when phantom powering is engaged (still enough time to get through an average session).
- Fully compliant with the USB 1.1 specification and uses USB adaptive mode for playback and USB asynchronous mode for record.
- Built-in low noise +48 Volt phantom power supply allows you to power up to 2 microphones as well as the preamplifier when running from any power sources including the USB bus.
- 1/8-inch TRS mini headphone jack with level and monitor mix controls on the rear allow for latency free local monitoring of the inputs while recording as well as playback monitoring of the USB bus. monitor mix is also routed to the 1/4-inch TRS balanced outputs. This lets you use the 1/4-inch outputs as either preamplifier outputs or as the monitor feed to your powered monitors.
Presonus BlueTube DP v2 2-Channel Mic/Instrument Tube Preamp
Main highlights- Tube drive tube-saturation control
- Illuminated Analog VU input-level meter
- Dual path, with both 12AX7 vacuum tube and solid-state gain stages
- Compact 1/2U Rack-Mount chassis
- Combo mic/instrument inputs with class A XMAX mic Preamplifiers and 48V phantom power
- 80 Hz high-pass filter, -20 dB pad, polarity-reverse switch
Rodyweil Microphone Preamp Mic Booster 4 Input Max 65db DI Box with 48V Phantom Power for Dynamic and Condenser Mic
Main highlights- With its unique full balanced circuit design, this microphone preamp produces super low noise and clean sound without adding any coloration to your sounds. It is perfect for home studios and professional studios, vocal recording, podcasting, and live streaming
- This microphone preamp can enhance your signal by up to +75 dB with clean and transparent gain. It is compatible with various microphones, including SM7B, SM58, 55SH, and others, whether they are dynamic or condenser microphones.
- The microphone preamp comes with XLR balanced output and 6.35mm stereo mic & line output that can be connected with audio interface, mixer, console and audio speaker and others audio device
- The microphone preamp comes with 48V phantom power and can work with both dynamic and condenser microphones. It has two-channel inputs, allowing you to boost one condenser mic and one dynamic mic at the same time.
- The black metal shell of this microphone preamp not only makes it sturdy but also enables it to effectively eliminate most EMC interference, resulting in low noise. the small, and lightweight device that is easy to carry and store. Furthermore, we offer a two-year warranty against any quality defects for this product
Rodyweil Microphone Preamp Mic Gain Booster with 2 Input Max 75db Gain 48V Phantom Power for Dynamic and Condenser Mic
Main highlights- With its unique full balanced circuit design, this microphone preamp produces super low noise and clean sound without adding any coloration to your sounds. It is perfect for home studios and professional studios, vocal recording, podcasting, and live streaming
- This microphone preamp can enhance your signal by up to +75 dB with clean and transparent gain. It is compatible with various microphones, including SM7B, SM58, 55SH, and others, whether they are dynamic or condenser microphones.
- The microphone preamp comes with XLR balanced output and 6.35mm stereo mic & line output that can be connected with audio interface, mixer, console and audio speaker and others audio device
- The microphone preamp comes with 48V phantom power and can work with both dynamic and condenser microphones. It has two-channel inputs, allowing you to boost one condenser mic and one dynamic mic at the same time.
- The black metal shell of this microphone preamp not only makes it sturdy but also enables it to effectively eliminate most EMC interference, resulting in low noise. the small, and lightweight device that is easy to carry and store. Furthermore, we offer a two-year warranty against any quality defects for this product
Pyle Bluetooth Multi-Channel Hybrid Pre-Amplifier System - 3000W Home Audio Rack Mount Stereo Power Amplifier Receiver w/ Radio, USB, UHF, Dual Wireless Karaoke mic, Speaker Sound System -PWMA4004BT
8.9 audio quality8.7 Simple to use8.4 worth the moneyWhy we love it
3000 watts of powerBluetooth compatibility6 different inputsPresonus TubePre v2 Tube Preamplifier DI Box
Main highlights- Separate instrument and mic inputs
- Phantom power, HP filter, -20 dB pad, and polarity-reverse
- Low-noise dual-servo (no capacitors) gain stage
- Gain control and tube drive saturation control
- 12AX7 tube-based preamp with XMAX solid-state input stage
Black Friday Sale
Deal ends in
HrsMinSec