10 Best Door Rollers Sliding In The Us - Black Friday 2024
2 Pack Sliding Patio Door Roller Assembly Fits for Pella Wood Glass Doors P/N #0C8P0001 (1992 to P), 1-1/2" Steel Ball Bearing, Edge Adjustable, Stainless Steel Housing W/Flange
Main highlights- We recommend replacing both 2 rollers at the bottom of the door at the same time.
- This is a Drive-In style patio door roller assembly that is driven into a rectangular mortise in the bottom of the door. When installing, the adjustment screw head should face toward the edge or stile of the door.
- The rear adjustment screws allow for quick and easy adjustments with a cross head screwdriver.
- Heavy duty 1-1/2 inch steel ball bearing concaved wheel with 11/16 in. wide and 2-3/4 in. long housing. For further dimensional information, please see the line drawing.
- Commonly used to replace rollers manufactured for Pella wood sliding patio doors Only. NOTE that New Style roller assembly with flange will NOT work on the Old Style, the flange drags along the track.
- Are your wood patio doors sticking or not closing properly? If so, you may need to replace the rollers.
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
HauSunHeavy Duty Sliding Patio Door Roller Assembly 1-1/4 Inch Steel Ball Wheel Bearing, Side Adjustable,2 Pack
Main highlights- ★【Standard Size】 The roller assembly contains 5/16-inch wheel thickness (width) x 1-1/4-inch diameter, 5-3/4-inch hole centers. This roller assembly has a minimum collapsed height of 1-1/2 in.
- ★【Solid Construction】High quality radial ball bearings still working after 100,000 cycles for 2 rollers bear 120KG. While others may use the bearings made from Carbon Steel W/O heat treating, we insists all bearings made from Heat Treated Bearing Steel
- ★【Lifetime Guarantee】: If the product did not meet your expectations or if you need a replacement please do not hesitate to contact us
- ★【Includes】 Includes 2 x Sliding Patio Door Roller,used for replacing damaged or missing roller assemblies on sliding patio doors
- ★【Easy to Install】Remove damaged or missing tandem roller assemblies in patio sliding glass doors , then install new sliding door roller assembly
9.6Exceptional
View offer on:
Show more
3
PRIME-LINEPrime-Line D 1984 1-1/2 In. Steel Ball Bearing Sliding Door Tandem Roller Assembly (Single Pack)
Main highlights- Used by a variety of sliding patio door manufacturers
- Stamped steel housing with ball bearing rollers
- Plain back housing with a 1/4-20 threaded mounting hole
- Features rear screw adjustment
- 1-1/2 inch diameter tandem concave steel rollers
9.5Excellent
View offer on:
Show more
4
HauSunSliding Patio Door Tandem Roller Assembly,1-1/4 Inch Steel Ball Wheel Bearing, 2 Pack
Main highlights- 【STANDARD SIZE】The roller assembly contains 5/16-inch wheel thickness (width) x 1-1/4-inch diameter
- 【SOLID CONSTRUCTION】high quality radial ball bearings still working after 100,000 cycles for 2 rollers bear 120KG. While others may use the bearings made from Carbon Steel W/O heat treating, We insists all bearings made from Heat Treated Bearing Steel.
- 【INCLUDES】 Includes 2 x Sliding Patio Door Roller, used for replacing damaged or missing roller assemblies on sliding patio doors
- 【GUARANTEE】: If the product did not meet your expectations or if you need a replacement please do not hesitate to contact us
- 【EASY TO INSTALL】Remove damaged or missing tandem roller assemblies in patio sliding glass doors , then install new sliding door roller assembly
9.3Excellent
View offer on:
Show more
5
PRIME-LINEPrime-Line N 7536 Sliding Closet Door Roller Kit (1 Kit)
Main highlights- Please refer to the line art drawing for dimensions and compare with your needs before ordering
- One spring-loaded Prime-Line part N 6614 top roller guide with a 7/8 inch plastic wheel, and a 3/8 inch diameter nail-down style base
- One spring-loaded N 6612 top pivot with a 1/4 inch diameter steel pivot and a 3/8 inch diameter nail-down style base
- One adjustable Prime-Line part N 6613 bottom pivot with a 1/4 inch diameter steel pivot and a 3/8 inch diameter nail-down style base
- Installation fasteners included with this item
- Includes one spring-loaded Prime-Line part N 6611 top roller guide with a 3/4 inch plastic wheel, and a 3/8 inch diameter nail-down style base
- All items are spring-loaded except for bottom pivot
- A soft mallet may be required for installation
9.2Excellent
View offer on:
Show more
6
PRIME-LINEPrime-Line D 1791 1-1/8 in, Steel Ball Bearing, Tandem Roller Assembly, Golden
Main highlights- STRONG AND DURABLE – Made of stamped steel housing with concave steel ball bearing rollers in a golden finish, these sliding door rollers are strong, durable, and built to last
- SLIDING DOOR ASSEMBLY – Replace or repair broken or missing sliding door rollers with this adjustable tandem roller assembly
- PATIO DOOR ROLLERS – This door roller assembly is used by Milgard as well as a variety of other manufacturers; primarily used on vinyl patio doors
- NOTE - Please refer to the line art drawing for dimensions and compare to your needs before purchasing
- DIMENSIONS – The housing of the patio door replacement rollers is 3/4 inch wide and 1 inch tall with a 1/4-20 threaded mounting hole on the back end and an optional use #10-32 threaded hole on the top
9.1Excellent
View offer on:
Show more
7
PRIME-LINEPrime-Line D 1797 1-1/2 In. Patio Roller Kit (2 Pack)
Main highlights- Used to replace rollers that are 1-1/2 inch diameter
- Steel ball bearing wheel
- Please refer to the line art drawing for dimensions and compare with your needs before ordering
- Easy to install in less than 30 minutes with a few simple tools
- Contains 2 steel ball bearing wheels, 2 axle pins, 2 roll pins, 2 carriage bolts with nuts, 2 rivet axels and 2 binder posts with #8-32 x 1/2 inch screws
- Can be mounted using a rivet, a roll pin, drive pin, binder post and screw or bolt and nut to install the roller in place
- A Phillips head screwdriver is required for installation
- 1-1/2 inch concave roller
9.0Excellent
View offer on:
Show more
8
APPERFiTSliding Door Roller for Power Slide Door Right Passenger Side Compatible with Honda Odyssey Van 2011 2012 2013 2014 2015 2016 2017 Replaces 72521-TK8-A11
Main highlights- Replacement part for OEM: 72521-TK8-A11
- Over time the original factory power slider door hinge comes with the vehicle will worn out and fail. The APPERFiT passenger side door center roller replacement kit is thoughtfully desinged to guarantee an exact match with the genuine oem dimensions and specifications. This sliding door wheel repair part is made from high-quality material, designed to withstand daily and maintain its appearance and functionality in the demanding conditions often encountered by vans.
- If you have a Honda Odyssey minivan and experience issues where your door stops and reopens automatically or continuously stops and closes, our side door bracket can potentially solve this problem. It is easy to install and may save you a significant amount on repair and shop expenses.
- Compatible with 2011 Honda Odyssey van, 2012 Honda Odyssey van, 2013 Honda Odyssey van, 2014 Honda Odyssey van, 2015 Honda Odyssey van, 2016 Honda Odyssey van, 2017 Honda Odyssey van
- 1-Year Warranty. We stand behind the quality of our products, and your satisfaction is our top priority. Should you encounter any questions, concerns, or issues with this odyssey sliding door parts , please don't hesitate to reach out to us via email.
8.8Very Good
View offer on:
Show more
9
MoxweyeniSliding Patio Door Rollers 1-1/4 Inch Sliding Door Tandem Roller Assembly Sliding Glass Door Rollers Replacement Sliding Door Wheel Replacement, for Sliding Glass Door Screen Door Gate Window (2 Pack)
Main highlights- Wide range of applications: sliding patio door wheel works well for sliding glass door, screen door, sliding gate, window, vinyl patio doors, closet and more, versatile and practical
- Sufficient quantity for daily need: you will get 2 pieces of sliding glass window rollers, enough quantity for using in different doors at one time, also you can replace the broken one in time or share one with others to show your kindness
- Simple to install: the sliding door roller assembly can be installed fast and effortlessly without extra tools, just remove the broken or missing tandem roller assemblies from your sliding glass doors or windows, then install our glass patio door rollers, and your sliding glass door will function well again
- Quality material for long time application: sliding door roller wheel uses quality brass to make, stable and not easy to break, safe and reliable, allowing you to use it with confidence for a long period; Also the radial ball bearings will still work after many cycles because of the heat treated bearing steel
- Appropriate size for effortless use: each sliding door tandem roller measures about 5/16-inch in wheel thickness (width) and 1-1/4-inch in diameter, a suitable size for replacing damaged or missing roller assemblies on sliding doors or windows
8.7Very Good
View offer on:
Show more
10
Lancisism2Pcs Sliding Door Tandem Roller, Heavy-Duty 1-1/4 Inch Sliding Door Tandem Roller Assembly Sliding Glass Door Rollers Replacement, 120kg/265lbs Load Capacity for Sliding Glass Door Screen
Main highlights- WIDELY USED - Our sliding patio door wheels work well for sliding glass doors, screen doors, sliding gates, wood/extruded aluminum/vinyl patio doors, sliding windows, closets, wardrobes, and more. Reach out to us if you have any questions. We’re always there for you.
- STANDARD SIZE - he sliding door roller measures 1-1/4 inches in wheel diameter and 5/16 inches in wheel thickness (width), a suitable size to fit most sliding doors and widows. The roller will be a good choice for replacing a damaged roller to restore your sliding door to normal use.
- SET OF 1/2/4 Pcs - You will receive 1/2/4 pcs sliding door tandem roller assemblies. They are of high quality with super smoothness on the bearing, and easy to slide without causing harsh noise. With the rollers, opening a sliding door will not be an effortful thing anymore!
- PREMIUM MATERIAL - Made of premium alloy steel with exquisite workmanship, the sliding door tandem roller is strong, heavy-duty, anti-rust, and corrosion-resistant, which can withstand loads up to 120kg/265lbs and is uneasy to rust or break even used in a humid environment.
- EASY TO INSTALL - Quick and simple installation without extra tools. Just remove the damaged or missing tandem roller assemblies from your sliding door and install the new sliding wheels. Your sliding door will function again after the installation!
8.5Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for door rollers sliding
