10 Best Display Ssd1308 Oled In The Us - Black Friday 2024
Best Choice1
wavesharewaveshare 1.5inch RGB OLED Display Module for Raspberry Pi/Jetson Nano/Arduino/STM32, 128x128 Pixels,16-bit High Color (65K Colors) SPI Interface
Main highlights- Viewing angle: >160°. Operating voltage: 3.3V / 5V. Dimension: 44.5 x 37 (mm).
- This is a general 1.5inch RGB OLED display module, 128x128 pixels, 16-bit high color (65K colors),clearly displays colorful images, with embedded controller, communicating via SPI interface.
- Driver: 1351. Interface: 4-wire SPI, 3-wire SPI. Display color: RGB, 65K colors. Resolution: 128x128.
- 128x128 high resolution, 65K colors, clearly displays colorful images. Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor.
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
HiLetgoHiLetgo 2.42" SSD1309 128x64 OLED Display Module 2.42 Inch OLED LCD Display Module IIC I2C 4 Pin or SPI 7 Pin Optional
Main highlights- IC I2C 4 Pin and SPI 7 Pin Optional
- Driver IC: SSD1309; Dot Matrix: 128x64
- Display color: Blue/Green/White/Yellow Optional
- 2.42" SSD1309 128x64 OLED Display Module
9.5Excellent
View offer on:
Show more
3
HosyondHosyond 5 Pcs 0.96 Inch OLED I2C IIC Display Module 12864 128x64 Pixel SSD1306 Mini Self-Luminous OLED Screen Board Compatible with Arduino Raspberry Pi (White)
Main highlights- There are no fonts embedded in the OLED controller, users can create fonts through font generation software.
- No backlight is required, and the display unit can be self-luminous. It has ultra-high contrast, bright and clear dots, and it is easy to read even small fonts
- It compatibles with Arduino Nano, R3 board and Mega, Raspberry pi, 51 MCU, STIM 32, etc.
- Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
- 0.96 inch,Resolution: 128 x 64, View angle: > 160°, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
9.3Excellent
View offer on:
Show more
4
HosyondHosyond 5 Pcs 0.91 Inch I2C OLED Display Module IIC OLED Screen DC 3.3V~5V Compatible with Arduino Raspberry PI (White Display Color)
Main highlights- Working power:3.3-5v, Operating temperature: -40 - 85 ℃.
- What will you get: there are 5 pieces OLED display module OLED display module for you.
- Resolution: 128 x 32 0.91 Inch OLED display, no need backlight, self-illumination, Display Color: White.
- Low power consumptio; SSD 1306 oled display; I2C oled display, IIC (I2C communications) simplifies connection.
- Compatible with Arduino nano, R3 board, Raspberry Pi 4B/3B+/3B/2B/Zero,ESP8266, ESP32, STM32, etc.
9.2Excellent
View offer on:
Show more
5
Teyleten RobotTeyleten Robot 2.42 inch 128x64 OLED LCD Display Module SSD1309 7 Pin SPI/IIC I2C Serial Interface for Arduino UNO R3 - White Light
Main highlights- SPI communication or I2C communication can be switched by configuring three resistors R3 R4 R5
- Interface Selection: to choose SPI or IIC interface through R3, R4, R5
- For IIC communication, it is necessary to move the resistor on R4 to R3, and R5 is soldered with 0 ohm resistor.
9.1Excellent
View offer on:
Show more
6
Teyleten RobotTeyleten Robot 0.96 inch LCD OLED Display Board Module 12864 128X64 IIC I2C SSD1306 Driver 4 Pins for Raspberry Pi Arduino(5pcs, White Light)
Main highlights- Voltage: 3V ~ 5V DC
- Ultra-low power consumption: full screen lit 0.08W
- There is also a removable transparent film on each OLED glass surface for scratch resistant protection until use.
- Pins has been soldered,comes in a small box to prevent it from being dropped during transportation
- Pin Definition: VCC,GND,SCL, SDA
9.0Excellent
View offer on:
Show more
7
HiLetgoHiLetgo 1.5" SH1107 128x128 OLED Display Module 1.5 Inch IIC I2C 4 Pin OLED Screen LCD Display White
Main highlights- Suitable for Arduino / Raspberry Pi / STM32 etc Display
- High resolution: 128×128; Display color: White
- Chip IC: SSH1107; Interface: IIC/SPI optional
- 1.5" SSH1107 OLED Display Module 128x128
8.8Very Good
View offer on:
Show more
8
MELIFEMELIFE 2pcs 1.54 Inch OLED I2C IIC Display Module, 128x64 Pixel SSD1309 Driver Self-Luminous OLED Screen Board for Arduino Raspberry Pi, Come with Storage Box (Blue)
Main highlights- LARGE SCREEN: The display measures 1.54 inches, presenting text that is easily legible and crystal clear.
- Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports.
- DETAILS: Resolution: 128 x 64, View angle: > 160°, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W.
- CUSTOM FONT: As there are no fonts already programmed into the OLED controller, users may develop their own fonts by utilizing font generation software.
- COMPATIBILITY: It compatibles with R3 board and Mega, Raspberry pi, 51 MCU, STIM 32, etc.
8.7Very Good
View offer on:
Show more
9
ideasparkideaspark 3Pcs 0.96 Inch OLED Display 3-Colors 128x64 SSD1306 SPI I2C IIC Serial LCD Screen Module Board with 4 Pins Soldered and 10 Dupont Cable Work Great with Arduino for Raspberry Pi
Main highlights- Resolution: 128 x 64, View angle: > 160°,Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
- Package List: 1 x Yellow-Blue OLED display,1 x White OLED display,1 x Blue OLED display,10 x Female to Female Dupont Cable,1 x Storage Box
- Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable
- Embedded Driver IC: SSD1306.Communication: I2C/IIC Interface, only need two I / O ports
- 0.96 Inch OLED Module for showing graphical & textual information directly on your micro-controller projects. Work great for Arduino UNO and Mega, for Raspberry pi, 51 MCU, STM 32,etc
8.5Good
View offer on:
Show more
10
MakerFocusMakerFocus 5pcs 0.96 Inch OLED Display Module I2C IIC Communication SSD1315 Driver 128 x 64 Pixel Yellow Blue Two Color Display for Arduino UNO R3 STM32/2 Raspberry Pi (Soldered)
Main highlights- Parameters: Driver Chip: SSD1315; Resolution: 128*64; Colour: Blue and Yellow; Viewing Angle: >160°; Power Consumption: 0.04W; Voltage: 3.3-5V DC; Working Temperature: -30℃-80℃
- No Embedded Fonts: There are no embedded fonts inside the OLED module, users can create the fonts through font generation software
- Changeable IIC Address: Communication mode is IIC, only two I/O interfaces are required. The I2C address can be changed, it is convenient to use with different machines
- Application: These IIC OLED modules can be used for raspberry Pi 5/4B/3B+/3B/2B/Zero, Beagle Bone Black, Arduino UNO and Mega, 51 MCU, STIM 32 and so on. Showing graphical & textual information directly of your machines
- 128 x 64 Pixel: Needn't backlight, the OLED module can self-luminous. It has super high contrast, bright and crisp dots, even tiny fonts quite readable
8.3Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for display ssd1308 oled
