10 Best Desoldering Wicks In The Us
KOTTO Solder Wick Braid with Flux No-Clean Desoldering Wick Removal Tool, Solder Sucker Wick Roll to Desolder PCB and Remove Solder for Electronics, 5 ft Length, 0.1 inch Width, 2 Pack Wick
Main highlights- Wick Application: The desoldering braid wicks are suitable for industry welding, lab work or home work, practical desoldering tools to clean a joint from excess solder and correct mistakes on small PCB boards, the desoldered components can be used again, bringing lots of convenience for your work.
- Quicker wicking: This Solder wick can be used to remove the unwanted excess solder quickly and efficiently during the solder re-working process or remove some already soldered components. The added Flux gives a faster action and helps the surfaces to be heated and solder to flow, which significantly reduces the solder repair time.
- Packages include 2 pcs of no-clean solder wicks, each wick is 5 ft in length and 0.1 inch in width.
- Easy to use: Simply just place the soldering wick against the solder and place heated solder iron tip on it, the soldering wick absorbs the solder due to its high thermal conductivity. By this way, you can remove the solder from the PCB or any metal surface. Leaves slight flux residue that is non-conductive and non-corrosive so it requires no cleaning.
- Copper braids: The braid desoldering wicks are made of 100% copper wires with fine braids woven together, and have good thermal conductivity. Also using the solder braid will protect the delicate components or electronic circuit boards from damages during soldering/reworking/repairing.
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
MG ChemicalsMG Chemicals - 454-NS Desoldering Braid #4 No Clean Super Wick Desoldering Braid, 0.1" Width x 50' Length, Blue
Main highlights- No clean super wick
- High SIR-meets the requirements of both the bellcore specification TR-TSY-000078 and IPC test method III
- Flux residue remaining on board does not have to be cleaned
- Flux residue is non-conductive and non-corrosive. Static free bobbins.
- Disclaimer: Color may vary slightly according to screen settings and resolution
9.7Exceptional
View offer on:
Show more
3
MG ChemicalsMG Chemicals - 453 Desoldering Braid #3 Fine Braid Super Wick with RMA Flux, 50' Length x 0.075" Width
Main highlights- Static free bobbins
- Oxide-free clean copper
- Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
- Manufactured under SPC guidelines
- Designed to leave a residue that is environmentally safe
9.5Excellent
View offer on:
Show more
4
LesnowLesnow solder wick braid 10ft Length Desoldering Wick Braid Remover Tool Solder Sucker 1 piece No-Clean soldering Wick Wire Roll and Disassemble Electrical Components
9.3 materials Quality9.1 Simple to use8.9 worth the moneyWhy we love it
Efficiently removes solder from various electronic components.
10ft length ensures ample supply for extended projects.
High-quality copper braid enhances absorption and capillary action.
9.4Excellent
View offer on:
Show more
5
SRA Soldering ProductsSRA Soldering Wick with Flat Woven Copper Desoldering Braid Strip and No Clean Flux for Easy Damage-Free Solder Removal - 3 Pack 10 Foot Solder Wick Spool
Main highlights- PCB Safe Residues: Desolder wick leaves little flux residue that is non-conductive and non-corrosive so it requires no cleaning. This product is also RoHs compliant.
- High Quality Materials: Impurity-free woven copper desolder braid construction with 3% no-clean flux provides superior conductivity, even at low temperatures.
- Fast & Effective Wicking: Unique gap-weave coated solder wick braid absorbs solder quickly like a sponge, reducing the likelihood of overheating and lifted pads.
- Easy to Use: Simply place desolder wick over work and apply heat to remove solder from parts and terminals, break solder bridges, and correct other soldering mistakes.
- 10ft Super Sized Desolder Spools: 30 Feet of standard width .098" desoldering wick infused with no-clean flux for fast and efficient solder wicking action.
9.3Excellent
View offer on:
Show more
6
BEEYUIHFBEEYUIHF Desoldering Wick Braid 30M - 98ft Length 2.5mm Width Solder Wick Braid with Flux, Cable Remover Tool Solder Sucker W 0.10'' L 98'
Main highlights- Wide range of use:The braided solder wick is suitable for studio, laboratory, school, home, professional repair, DIY hobbyist and industrial soldering work; and the wick is designed with fine weave, Increase the speed of cleaning the PCB pad. Bring convenience to your welding work.
- The desoldering wicks Feature: Oxidation resistivity and anti-corrosion protection,good thermal conductivity. Speed up the speed of absorbing tin and low residue of flux. Increase the speed of cleaning the PCB pad.
- Solder Remover wire Materials：The tin suction line is woven with flat needles, soft design,fast heat conduction, suitable for rapid tin suction, not only improving work efficiency and quality, but also more clean.The Braided Desoldering wicks are made of 100% copper wires with a fine braid design.
- Desoldering wick advantage: Refined chemical formula, resistant to oxidation and corrosion,clean tin absorption.Fast heat conduction, suitable for various electronic PCB circuit boards.
- BEEYUIHF Desoldering wick with flux Size: W 0.10'' L 98'; width: 2.5mm, Length: 30M - 98ft - Large Size Desoldering Braid
9.2Excellent
View offer on:
Show more
7
EssmetuinDesoldering Wick and Soldering Flux Paste for Electronics Repair, No Clean Flux(10CC), Solder Removal Kit
Main highlights- Reliable Brand: Trusted by electronics technicians, this brand delivers consistent performance repair after repair.
- Quick Removal: This desoldering wick and no clean flux paste set allows for fast, effective removal of solder from circuit boards without damaging components.
- Low Residue: No Clean Solder Wick, As Only a Small Amount of Residue is Left After Use, Saving You Time On Cleaning
- High Activity Rosin Can Help To Remove The Oxide Layer On The Welding Surface Easily
- Convenient Kit: Get both desoldering wick and no clean flux paste together in one compact kit for complete soldering and desoldering solutions wherever your repair work takes you.
9.1Excellent
View offer on:
Show more
8
NTE ElectronicsNTE Electronics SW01-5 No-Clean Solder Wick, #3 Green, .075" Width, 5' Length
Main highlights- Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
- Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
- Available with standard or anti-static bobbins
- 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
8.9Very Good
View offer on:
Show more
9
AUSTORAUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux - Desoldering Vacuum Pump Solder Removal Tool
Main highlights- Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
- High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
- High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
- Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
- 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size
8.8Very Good
View offer on:
Show more
10
Hotop6 Pieces Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 1.5 meter Length (Multi-color,0.04 Inch, 0.06 Inch, 0.08 Inch, 0.1 Inch, 0.12 Inch, 0.14 Inch)
Main highlights- Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
- What you get: come with 6 pieces of no-clean solder wicks in different size, including 0.04 inch, 0.05 inch, 0.07 inch, 0.1 inch, 0.12 inch, 0.14 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs
- Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
- No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards
- Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering
8.7Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for desoldering wicks
