10 Best Cr10s Pro V2 Direct Drive In The Us
Best Choice1
Micro-SwissMicroswiss NG™ REVO Direct Drive Extruder for Creality CR-10 / Ender 3 / Ender 3 Pro/Ender 3 V2 Printers - Drop in Upgrade - Rapid Nozzle Change Revo Technology
Main highlights- Seamless integration with Revo Hotend (24V)
- Fits: CR-10 / CR-10s / Ender 3 / Ender 3 Pro / Ender 3 V2 / Sunlu S8 / Sunlu S8 Pro
- Adaptable to wide range of 3D Printers
- 3:1 Gear ratio
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
Micro-SwissMicroswiss NG Direct Drive Extruder for Creality CR-10S Pro V2 and CR-10 Max - Made in USA
Main highlights- This extruder overcomes the shortcomings of all current counterparts on the market, to create an optimal printing experience for everyone. With the Bevel Gear design, we are able to achieve the industry shortest filament path (less than 41mm). The unique motor placement allows for highly compact, low overhang design. This further increases system rigidity.
- Made in USA by Microswiss
- High Torque: 3:1 Gear ratio
- Compatible with Creality CR-10S Pro V2 / CR-10 Max
9.7Exceptional
View offer on:
Show more
3
Micro-SwissMicro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers (Drop in Upgrade, No modifican Required)
Main highlights- This kit comes with everything you need to upgrade your printer to a Direct Drive Extruder. It comes with 1x Master Extruder Assembly 1x Adaptation plate 1x Stepper motor 1x Fan Shroud 1x Custom extension cable 1x Hotend assembly and hardware kit.
- This extruder overcomes the shortcomings of all current counterparts on the market, to create an optimal printing experience for everyone. With the Bevel Gear design, we are able to achieve the industry shortest filament path (less than 41mm). The unique motor placement allows for highly compact, low overhang design. This further increases system rigidity.
- Made in USA by Microswiss
- High Torque: 3:1 Gear ratio
- Drop in Direct Drive Extruder for CR-10 and Ender 3 Series. It is Fully Compatible with Creality CR-10 / CR-10s / Ender 3 / Ender 3 Pro / Ender 3 V2
9.6Exceptional
View offer on:
Show more
4
Micro-SwissMicroswiss Direct Drive Extruder for Creality CR-10 / Ender 3 Printers
Main highlights- Nozzle size: .4mm
- Made in USA by Microswiss
- Fits: CR-10 / CR-10-S4 / CR-10S / CR-10 MINI / CR-20 / CR-20 Pro / Ender 2 / Ender 3 / Ender 3 Pro
- Filament size: 1.75mm
9.5Excellent
View offer on:
Show more
5
Micro-SwissMicroswiss NG Direct Drive Extruder for Creality CR-10 V2 / V3 - Plug and Play - All Metal Hotend - Made in USA
Main highlights- Made in USA by Microswiss
- Integrated with a Micro Swiss All Metal Hotend
- Fits: Creality CR-10 V2 / Creality CR-10 V3
- Adaptable to wide range of 3D Printers
- 3:1 Gear ratio
9.3Excellent
View offer on:
Show more
6
Micro-SwissMicroswiss All Metal Hotend Kit (for CR-10s PRO/CR-10 Max/Ender 3 V2 Neo) - Drop in Upgrade - Made in USA
Why we love it
Compatible: Fits CR 10S Pro/CR 10 Max/Ender 3 V2 Neo
High Quality: Grade 5 Titanium Heat Break
US Made: Micro Swiss in USA
9.2Excellent
View offer on:
Show more
7
POLISI3DUpgrade Light Universal DDB Dual Gear Extruder Bowden or Direct Drive Plated Copper Printhead Compatible with Ender 3 V2 / Pro / 5 Pro, CR10/ Cr-10S S4 S5 3D Printer TPU
Main highlights- We also upgrade the dual gears made from Hardened steel material and nickel plated and New design with Pulley bearings Hole to advoid the friction makes Higher lubrication and stable printing, Protects the gears and gearings, longer lifetime.
- This extruder weight with high torque small motor is around 203g, very light,makes your printing more stable. About the motor details , please check the specification picture in this listing.
- This extruder is upgraded with two applications - Bowden drive or Direct drive, can switch them with the Connector adapters. And Double drive extrusion.
- Heater block and 0.4mm nozzle are made from copper material and plated, which could reach up to 500C degree; A bimetal V6 heatbreak will come, which made from two components - Titanium TC4 and Copper, Titanium TC4 reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction.
- An installation plate makes this extruder compatible with 1.75mm Ender 3, Ender 3 V2, Ender3 Pro, Ender 5, Ender 5 Pro, CR-10, Cr-10S S4 S5 3D Printer
8.9Very Good
View offer on:
Show more
8
ChowThinkChowThink Armour V2.0 Direct Drive Extruder with All Metal Structure and Hardened Steel Gear,Dual Gear, Ceramic Heating Block,DLC Nano Coated Bimetal Heatbreak for Ender3,Ender3 V2,Ender3 pro Upgrades
Main highlights- 【Reduction ratio 5:1】 Torque amplification, reduction ratio 5:1, large extrusion force Reduce clogging.Hand self integration, with manual knob, refuelling debugging can be manually withdrawn；extrusion wheel pressure can be adjusted to cope with different material( PLA, PETG, ABS, TPU, ASA, Nylon, and Polycarbonate...)1.75mm filament.
- 【Optimization design,Easy to install】 Transparent window design, easy to observe the internal operation; One key opening and closing, convenient refuelling, while easy to clean the interior.Easy to install for the ender3 ender3 v2,ender 3 pro,ender 3 neo.
- 【DLC Nano Coated Bimetal Heatbreak】This Heatbtreak is made from two components, Copper and Titanium TC4. Using the different thermal conductivity characteristics of the two metals.The two metals are bonded using the Interference fitting process.The surface is coated with DLC Nano Coated, the inner wall is very smooth.Suitable for printing in various temperatures and materials.
- 【Ceramic Heating Block,E3D V6 Nozzle】Heating ring design can improve heating efficiency and thermal stability, 60W heating power heating speed is very fast, and with all copper heating block, there is better heat conductivity. Can better cooperate with high-speed printing.Built-in 300℃ thermistor.Use E3D V6 nozzle, good compatibility.
- 【Center of gravity back design,All metal】 The motor is designed above the X axis, so that the overall center of gravity is backward, and the influence of deflection torque on movement is reduced.All metal body, hardened steel reduction gear and extrusion dual gear, all Metal Structure,metel fan,metal handle, two metal knob nut,good texture, good durability.
8.8Very Good
View offer on:
Show more
9
SkouphyCreality Official Sprite Direct Drive Extruder Kit with 80N Stepper Motor, Direct Drive Kit for Ender 3, Ender3V2, Ender 3 Pro, Ender 3 Max, Support Printing Flexible and High Temperature Filaments
Main highlights- Support Printing Flexible and High Temperature Filament: With direct drive extruder and up to 300°C all metal hotend kit, the Spirit direct drive extruder upgrade kit supports 1.75 MM filaments, including PLA, TPU, PETG, ABS, PA, PC etc.
- Easy to install, more adaptable: Compatible with Ender 3, Ender3v2, Ender 3 pro and Ender 3 Max. Comes with a long extruder motor connection cable, tools, accessories and wiring diagram instructions for installation and easy assembly.
- Double gear feeding, stable and reliable: The double tooth structure makes the feeding is more reliable and stable. Reduces the chance of clogged nozzles when retracting consumables and failures when loading new consumables. Full metal hot end kit with heating block, titanium throat and cooling block, allowing you to print high temperature materials up to 300°C.
- Creality Official: Creality Sprite Extruder Pro Upgrade Kit makes all Ender 3 series 3D printers have direct extrusion and high temperature printing conditions.
- All Metal Design: Creality Sprite direct drive extruder pro kit perfectly combine extruder and all metal hotend, enables all the Ender-3 series 3D printers a direct extrusion and high temperature printing conditions.
8.7Very Good
View offer on:
Show more
10
Micro-SwissMicroswiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 (Linear Rail Edition) Drop in Upgrade - Light Weight - Made in USA
Main highlights- Made in USA by Microswiss
- Integrated with a Microswiss All Metal Hotend
- Fits Following printer with MGN12 Linear Rail with MGN12H Carriage Block:CR-10 / CR-10s / CR-10-S5 / Ender 3 / Ender 3 Pro / Ender 3 V2 / Sunlu S8 / Sunlu S8 Pro
- Adaptable to wide range of 3D Printers
- 3:1 Gear ratio
8.6Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for cr10s pro v2 direct drive
