10 Best Cr 10 Hotend In The Us - Black Friday 2024
Best Choice1
Micro-SwissMicroswiss NG Direct Drive Extruder for Creality CR-10 V2 / V3 - Plug and Play - All Metal Hotend - Made in USA
Main highlights- Made in USA by Microswiss
- Integrated with a Micro Swiss All Metal Hotend
- Fits: Creality CR-10 V2 / Creality CR-10 V3
- Adaptable to wide range of 3D Printers
- 3:1 Gear ratio
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
Micro-SwissMicroswiss FlowTech Hotend for Creality CR-10 SE - Leakproof Nozzle - Cold Nozzle Change - High Flow - All Metal Design - Made in USA
Main highlights- Made in USA by Microswiss
- Leak-Proof Nozzle: Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.
- High-Flow Characteristics: Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.
- Cold Nozzle Change: Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.
- All-Metal Design: Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged.
9.6Exceptional
View offer on:
Show more
3
CreativityCreativity CR10 Hotend Assembled MK8 Extruder Kit Full Set (with 0.4MM Nozzles) Upgrade for 3D Printer CR 10/CR 10S/S4/S5 Replacement Parts
Main highlights- Thermistor and Heating Tube: High quality thermistor and heating tube are up to 260℃,with rapid-risen temperature, precise temperature control and good stability.
- Fluent Printing Without String: Independently developed brass nozzle has bullet structure, which improves uniform heating to reduce clogging and string.
- Fast Heating and Heat Dissipation: Heating block + heatsink + fan, fficient heating and heat dissipation, greatly improved printing success rate. Fan cooling applied, even heat dissipation, more stable printing.
- Easy to Install: Easy for the CR10 hotend to Assemble, packed whole extruder kit, just fix it on X axis and connect to control box, it will work.
- Applicable Models: This 12V full hotend kit is compatible with CR 10/CR 10 Mini/CR 10S/CR 10 S4/CR 10 S5 FDM 3d printers.
9.5Excellent
View offer on:
Show more
4
HICTOPHICTOP CR-10 Hotend Full Assemble MK8 Extruder Fit for Creality CR-10，CR-10S，CR-10 Mini,Tevo Tornado 3D Printer
Main highlights- 5 Extruder kit : cr-10 hotend with thermistor, heater carriage, and two cooling fans
- 4 Stable Material for cr-10 hotend assembly : Aluminum, stainless steel, brass and MK8 nozzle
- 3 Fit for: Creality CR-10, CR-10S, CR-10 Mini and similar 3D printers
- 2 Durable Quality: plug and play cr-10 hotend assembly with high quality
- 1 Easy for the CR-10 hotend to Assemble: Packed whole extruder kit, just fix it on X axis and connect to control box, it will work
9.3Excellent
View offer on:
Show more
5
CrealityCreality Official CR-10 SE Ceramic Heating Block Kit, 60W Fast Heating Wear-Resistant Hotend Kit Supports 300°C High Temperature with Copper+Titanium Alloy Throat Tube and Hardened Steel Nozzle
Main highlights- 【Professional Support】- To ensure your pleasant shopping experience, Creality has a professional customer service team to solve your problems. If you have any problems, please do not hesitate to contact us. We will provide friendly and fast customer service to solve your problem within 24 hours.
- 【Original Quality】- 100% Creality Official CR-10 SE ceramic heating block kit, providing high-speed and high-quality printing. Bi-metal (copper+titanium alloy throat tube) heatbreak, great to prevent thermal creep. The nozzle is made of hardened steel, which is wear-resistant.
- 【High Speed, High Flow】- The hot melt section length increased by 30%, the CR-10 SE hotend supports 600mm/s high-speed and 32mm³/s high flow printing.
- 【All-metal Design】- The CR-10 SE heating block kit is all metal design, more powerful overall performance and more resistant to high temperature. Support 300℃ high temperature printing, compatible with more filaments such as Hyper PLA, PLA, ASA, PETG, TPU, PA, PC, PLA-CF, PA-CF, PET-CF, etc.
- 【60W Ceramic Heating】- Poweful 60W ceramic heating ring improves heating efficiency, more uniform heating and faster heat transfer. Only takes 40 seconds to heat up to 300℃. Fully melt various filaments to make the quality of printed works better.
9.1Excellent
View offer on:
Show more
6
CrealityCreality CR-10 SE Hotend Kit, Original Ceramic Heating Block Kit 300°C 60W Fast Heating High Thermal Conductivity Ceramics with Bi-Metal Copper+Titanium Alloy Throat Tube and Hardened Steel Nozzle
Main highlights- 【Support Up to 600mm/s High-speed Printing】The overall hot melt section is increased by 30%. The 28.5mm length large hot melt section and high flow able to fully melt filaments for up to 600mm/s high-speed printing
- 【Original Kit for CR-10 SE】This Ceramic Heating Block Kit is compatible with Creality CR-10 SE for up to 600mm/s high speed printing. The heat break is made of Bi-metal (copper+titanium alloy), preventing thermal creep. Hardened steel nozzle, wear-resistant and enabling 300°C printing
- 【After Sales Support】We provide professional after-sales service. Please kindly contact us(seller) via "ask a question" find us directly cause our customer service will respond to you within 24 hours no matter what the question
- 【60W Ceramic Heating Ring】Powerful 60W ceramic heating ring improves heating efficiency, more uniform heating and faster heat transfer. Heating up to 300°C in 40 seconds
- 【300°C High Temperature Resistance】All-metal heat break design boasts enhanced performance and high temperature resistance up to 300°C, making it compatible with more filaments such as Hyper PLA, PETG, CF, ASA, TPU, ABS and PA, and more
8.9Very Good
View offer on:
Show more
7
Micro-SwissMicroswiss All Metal Hotend Kit for Creality CR-10 / CR10 / CR10S / Ender 2 / Ender 3 Ender 5 Printers .4mm
Main highlights- This is a Drop in All Metal Conversion Kit for Creality printers
- Nozzle size: 0.4mm
- Made in USA by Microswiss
- Kit Includes: Aluminum Cooling Block, Grade 5 Titanium Heat Break, Aluminum Heater Block, Brass Plated Wear Resistant MK8 .4mm Nozzle, Silicone Sock
- Fits: Creality CR-10 / CR-10S / CR-10-S5 / CR-10 MINI / CR-10-S4 / Ender 2 / Ender 3 / Ender 3 Pro / Ender 5 / TronXY X5S
8.8Very Good
View offer on:
Show more
8
Micro-SwissMicroswiss All Metal Hotend Kit (for CR-10s PRO/CR-10 Max/Ender 3 V2 Neo) - Drop in Upgrade - Made in USA
Why we love it
Compatible: Fits CR 10S Pro/CR 10 Max/Ender 3 V2 Neo
High Quality: Grade 5 Titanium Heat Break
US Made: Micro Swiss in USA
8.7Very Good
View offer on:
Show more
9
KOYOFEICreality CR-10 SE Ceramic Heating Block Kit, 3D Printer Parts All Metal Heat Break 300°C High Temperature Resistance Hotend Heating Block Kit with 5PCS Brass Nozzles for CR-10 SE
Main highlights- Titanium Alloy and Copper Heat Break High Temperature Resistance: All metal design, more powerful overall performance support 300°C high temperature printing, compatible with more filaments such as PLA, ABS PETG,TPU, PP, PC,nylon, etc.
- Processing Upgrade for Better Printing: The heat break is made of titanium alloy, with an extremely thin wall thickness of 0.25 mm for excellent heat insulation performance.Nozzle inner wall roughness < Ra0.4,smoother feeding.
- Powerful ceramic heating ring: The heating block kit uses a 60W ceramic heating ring to increase the heating speed, more uniform heating, and faster heat transfer.
- Large Hot Melt Section and High Flow Support: The overall hot melt section is increased by 30%(The hot melt section length is 28.5mm),supporting up to 600mm/s high-speed printing.
- Compatible Models: This Ceramic Heating Block Kit is compatible with Creality CR-10 SE High Speed 3D Printers.
8.4Good
View offer on:
Show more
10
Meafeng3 PCS 3D Printer Extruder Hotend with 9 PCS .4MM MK8 Nozzles Suitable for CR-10, CR10, CR10S, Ender 3, Ender 3 pro, Ender 5
Main highlights- Our Hotend kit does not contain heating elements, but we reserve installation locations for the heating elements, so you can configure heating elements with different powers according to your personal situation.
- Meafeng extruder hotend kit suitable for almost series Creality printers and MK8 nozzles. And we equip them with 3pcs 0.4mm MK8 replacement nozzles.
- Meafeng extruder hotend can work with different size mk8 nozzle, such as 0.2, 0.3, 0.4, 0.5, 0.6, 0.8 ,1.0 MM
- HIGH PRECISION: The improved aluminum cooling block design offers better heat dissipation and the frosting surface of aluminum Heat Break anodized for more sturdy and wearable; integrated structure are convenient for disassembly, repair and assembly.
- As a direct replacement for the stock hardware, installation requires no additional parts or modifications to use. You only need 5 to 10 minutes to complete the installation.
8.3Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for cr 10 hotend
