10 Best Cooling for Mosfet In The Us
Best Choice1
ReliaBotReliaBot 12V or 24V 30A MOSFET Hot Bed Power Expansion Board with Cooling Fan Heating Controller High Current Load Module for 3D Printer Heated Bed
Main highlights- We recommend using a 24V power supply when using a heat bed with high current
- Voltage: 12V to 24V; Max Current: Over 30A
- Thermal paste has been applied between the heat sink and MOSFET chip. The fan will further cool down the chip, so the MOSFET controller can work better under high current than other controllers.
- Maximum power of the heated bed: Over 360W (12V) or 720W (24V)
- Make sure that the cables from the controller board to hotbed can withstand high current
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
EasycargoEasycargo 100pcs Heatsink Assortment Kit Small Cooler Aluminum Heat Sink Set for Cooling Laptop CPU GPU VGA RAM VRAM VRM IC LED MOSFET Transistor SCR Voltage Regulator (without Thermal Tape)
Main highlights- Small anodized Aluminium: 20pcs 9x9x5mm, 8pcs 10x10x10mm, 8pcs 11x11x5mm (L*W*H)
- Silver Tone Aluminium: 20pcs 7x7x6mm, 10pcs 8.5x8.5x8mm, 8pcs 15x15x6.5mm (L*W*H)
- Medium anodized Aluminium: 8pcs 14x14x7mm, 8pcs 19x19x5mm, 8pcs 20x20x6mm, 2pcs 22x22x10mm (L*W*H)
- Can be used for cooling of variety of electronics components such as Development Boards VRAM VRM CPU GPU VGA RAM IC Chips LED Laptop MOSFET Transistor SCR Southbridge Northbridge Voltage Regulators m.2 SSD NVMe 2280 2242 22110 modules.
- 100pcs small to medium sizes of heat sink.
9.7Exceptional
View offer on:
Show more
3
EasycargoEasycargo 20pcs 9mm Small mini Heatsink Kit 9x9x5mm + 3M 8810 thermal conductive adhesive tape, mini cooler Aluminum Heat Sink for cooling VRM GPU Stepper Driver MOSFET VRam Regulators (9mmx9mmx5mm)
Main highlights- Weight: 0.02 oz / 0.58 gr per piece
- Pre-applied 3M 8810 thermal conductive adhesive tape backing
- Includes 20 pieces black anodized aluminum heatsink 9mm
- Dimension: 0.35 x 0.35 x 0.20 inch / 9mmx9mmx5mm (L*W*H)
- Can be applied for passive cooling of Stepper Drive, MOSFET, VRM GPU, Vram, IC Chips etc.
9.6Exceptional
View offer on:
Show more
4
SGTKJSJS23% Off60pcs Mini Heatsink Kit, Cooler Heat Sink for Cooling VRM Stepper Driver MOSFET VRam Regulators (8.8mmx8.8mmx5mm) Black
Main highlights- black anodized aluminum heatsink， Exquisite workmanship, good heat dissipation, long service life.
- Weight: 0.03 oz / 0.9 gr per piece
- Small in size, light in weight, size: approx. 8.8 x 8.8 x 5mm(L*W*H)
- Can be applied for passive cooling of Stepper Drive, MOSFET, VRM, Vram, IC Chips raspberry pi models pi electronics, computers, electrical appliances, and heat dissipation etc.
- 60pcs Small Mini Heatsink Kit+1 thermal adhesive.
9.4Excellent
View offer on:
Show more
5
EasycargoEasycargo To-220 Aluminium Heatsink 25x34x12mm,TO220 Heat Sink for Cooling MOSFET SCR Power Voltage Regulator ICS (25mmx34mmx12mm) (Anodized Black 5-Pack)
Main highlights- Weight: 0.4 oz / 10 gr
- Size: 1.3"x0.99"x0.47" / 25x34x12mm
- Hole threaded size: M3, thickness: 1.5mm
- Can be applied for cooling voltage regulators LM78XX, LM317, TDAXX etc
- Aluminium Heatsink for TO-220 power semiconductor packages
9.3Excellent
View offer on:
Show more
6
Bymugo2 Pack 10g (20g in Total) HY910 0.975W/m-k Thermal Conductive Glue, High-Performance Thermal Plaster, Silicone Viscous Adhesive Cooling Compound, Heatsink Glue for LED GPU MOSFET 3D Printer IC Chipset
Main highlights- Wide Service Temperature Range - With a service temperature range of -60~250 degrees Celsius, this thermal adhesive is suitable for use in a wide range of industries and applications. It has good thermal conductivity and stability, and is ideal for use in electrical appliances, instruments, and other industries that require effective heat dissipation.
- Strong Adhesion - This thermal plaster features strong adhesion properties that allow it to bond with most metals and non-metals, ensuring a reliable and long-lasting connection. The adhesion and tensile strength is 2.1（MPA）, making it a high-performance option that delivers excellent results.
- Safe and Non-Electrical Conductive - This thermal adhesive is non-electrical conductive, safe, and non-toxic, making it safe for both users and electronic components. It is odorless, moisture-resistant, and non-swelling, ensuring that it does not damage the substrate over time. Important: it is important to note that this thermal glue should not be used between the CPU and heatsink.
- Quick Drying Time - This thermal adhesive cures quickly upon contact with air, with a drying time of approximately 30 minutes at 25℃. This makes it easy and convenient to apply, with minimal downtime required.
- High Thermal Conductivity - With a thermal conductivity rate of 0.975W/m-K, this thermal conductive glue helps disperse heat effectively from MOSFETs, LEDs, ICs, GPU chipsets, and other electronic components that require direct bonding. It is suitable for all heatsinks without a fixed clip, and can be used for a wide range of applications.
9.2Excellent
View offer on:
Show more
7
JienkJienk 20PCS Aluminum Heat Sink with Thermal Conductive Adhesive Tape, 13×13×3mm Heatsink Cooler for Cooling VRM GPU Stepper Driver MOSFET VRam Regulators
Main highlights- 【Application】Can be applied for cooling VRM GPU Motherboard MOSFET Voltage Regulators, chips, stepper motor driver module and other small electronics that didn't come with any cooling.
- Pre-applied blue thermal conductive adhesive tape backing, easy attach to the application with no cutting to do.
- Can be used with other devices such as the Beaglebone to cool processors, regulators, etc, compatible with most Raspberry Pi cases.
- Aluminum alloy, great function for heat dissipation. Reduces CPU and LAN Temperature in enclosed and overclocked environments.
- 13mm anodized aluminum heatsink; Dimension: 0.51 x 0.51 x 0.12 inch / 13 x 13 x 3mm (L*W*H)
9.0Excellent
View offer on:
Show more
8
EasycargoEasycargo Thermal Glue, High Performance Silicone Thermal Conductive Adhesive Glue, Cooler Epoxy Compound for Heatsink GPU VRM VRAM LED IC Chips MOSFET BJT Transistor 3D Printer PCB Tec1-12706
Main highlights- Thermal conductivity > 0.975 w/mk
- Thermal Impedance: < 0.06
- Premium thermal glue for bonding and conducting heat at the interface of cooler heatsink and GPU VRM VRAM PCB LED, BJT MOSFET transistor, Voltage regulator, IC Chips, Thermoelectric Peltier Cooler Module
- Non-Electrical Conductive, Non-corrosive ,Non-toxic, High Performance, Working at High temprature for cooling electronics, robotics.
- 10 gram high performance thermal glue with strong adhesion.
8.9Very Good
View offer on:
Show more
9
uxcelluxcell 16mm x 15mm x 10mm TO-220 Aluminum Heatsink for Cooling MOSFET Transistor Diodes 20pcs
Main highlights- [ NOTE ] This cooler is a tiny size, please note before your purchase.
- [ MATERIAL ] Aluminum Alloy material is lightweight and dissipate heat fast.
- [ MAIN PARAMETER ] small heatsink with a M3 size hole; overall size: 16 x 15 x 10 mm / 0.63 x 0.6 x 0.4 inch (L*W*H); color: silver tone.
- [ FEATURE ] Without any support pin, this makes it good for prototyping and PCB.
- [ APPLICATION ] This heatsink is designed for cooling MOSFET transistors, diodes or voltage regulators (TO-220 components), such as 7805, 7812.
8.6Very Good
View offer on:
Show more
10
SGTKJSJSTO220 heatsink,To-220 Heat Sink Mounting Kits ， for Cooling MOSFET SCR Power Regulator IC，LM78XX Voltage Regulator, MOSFET Transistor (25mmx34mmx12mm) Black
Main highlights- Size: 1.3" x0.99" x 0.47" / 25x34x12mm
- Quantity: 10pieces in black， Screw + Bushing and Insulator Rubberized Silicone
- Hole thread size: M3, thickness: 1.5mm
- Can be applied to cooling voltage regulators LM78XX, LM317, TDAXX and so on.
- Aluminum heat sink for TO-220 power semiconductor package
8.5Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for cooling for mosfet
