10 Best Composite Resin Warmer In The Us - Black Friday 2024
Best Choice1
DXMC-Warmer Type 2:Dental Composite Compule Anesthetic Cartridge Warmer
Main highlights- Takes about 10~15 min. to reach 40°C. (Based on the lid closed & AC system off)
- Recommended temperature : lidocaine at 37°C (body temperature) / composite at 40°C~45°C
- LED display shows current temperature and adjust the temperature by 1°C with '▲'/'▼' button. When Power button is pressed shortly, temperature switches from Low-Medium-High (30°C-40°C-50°C)
- Improves the flow capacities, reduces microleakage, and reduces curing time by pre-heating the composites
- 3 Large Slot / 4 Small Slots : Large slot for composite or dispenser gun / Small slot for anesthetic cartridges or composite compules
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
ANNWAHANNWAH Dental Resin Heater with Filter Cover,Dental Composite Warmer Used to Heat Resin,Composite Resin Heater Improve Resin Properties
Main highlights- 5.Notice: All the parts can be cleaned with a dishcloth. Do not put in liquid or autoclave.
- 4.Third gear temperature：The temperature can be adjusted to 40℃/45℃/50℃, and the temperature tolerance is controlled within ±1℃.
- 3.Two Heating Methods：Composite resin heater can heat the resin by two heating methods. Insert the resin into the Honeycomb heating barrel to heat，or put the resin on the Resin heating plate and close the light filter cover to heat and keep warm.
- 2.Application: The dental composite warmer is used to heat the resin and to place the prepared inlay and veneer to improve the bonding performance, to prevent premature curing of the composite material, and to heat the resin injection nozzle.
- 1.Products Include: Dental Resin heater include light filter cover、resin heating plate、honeycomb heating barrel、heating base、power adapter. The light filter cover can filter out 99% blue light.
9.5Excellent
View offer on:
Show more
3
FenciaDental Resin Composite Softener Heater Dental Material Warmer with Light Filter Cover 40℃/45℃/50℃ 110V
Main highlights- 【Usage】:Quick flash means heating up, when the temperature reaches 50℃, then press the key it can be cooled to 40℃;,The light slowly flashes when cooling down.
- 【Notice】:All the parts can be disinfectant cloth to wipe clean. Don't take any part in any liquid immersion disinfection. Not 135℃/275℉ sterilization.
- 【Application】：Resin heater is designed for heating composite resin material to improve the flow of its adhesive properties.
- 【Adjustable Temperature】:One key operation, three types of precise and adjustable temperature 40/45/50℃(104/113/122℉ not on the machine).
- 【2 Heating Ways】:Put the resin in the round disk and cover the light filter cover or insert in AR heater hole.
9.3Excellent
View offer on:
Show more
4
ANNWAHANNWAH Dental Composite Heater, Dental Resin Warmer Used to Heat Resin, Heating Temperature 30 ℃ - 70 ℃ Improve Resin Properties
Main highlights- 5. Anti-Scalding Sign: maybe high temperature while working, and the body has an anti-scalding sign as a warning.
- 4. High Grade and Durable: the heater is an alloy body, high-grade and durable.
- 3. LED Digital Display: Can accurately work through the LED display temperature , with a metal self reset button.
- 2. Heating Temperature: the resin heater can adjust the temperature from 30℃to 70℃, with accuracy up to 0.1℃.
- 1. Application: the dental composite heater is used to heat the resin and to place the prepared inlay and veneer to improve the bonding performance, to prevent premature curing of the composite material, and to heat the resin injection nozzle.
9.1Excellent
View offer on:
Show more
5
Super DentalSuperdental Resin Composite Softener Heater Dental Material Warmer 40℃-50℃ MagicBox
Main highlights- With a special filter material,it can filter out 99% blue light
- The MagicBox is designed to be used to heat the resin and to place the prepared inlay and venner to improve the bonding performance, to prevent premature curing of the composite material and to heat the resin injection nozzle.
- MagicBox uses a precise circuit to control the heating module,so that the temperature tolerance is controlled at ±1℃
- Depending on the choice of material and personal preference,the temperature can be set to:40℃/45℃/50℃。
8.9Very Good
View offer on:
Show more
6
TMISHIONmagic box Softener compound dental resin Heater Warmer material filter light Cover Box Dental Material Split Type Resin Equipment Repair Photocuring 100‑240V(US)
Main highlights- PREVENTS RESIN HARDENING: Uses the precision circuit control module to heat, controlling temperature tolerance within one degree, depending on your choice of material and preference, the temperature can be set up to: 40 degrees, 50 degrees and 70 degrees
- PRACTICAL: A key operation, the temperature can be adjusted according to your choice of materials. Convenient to observe and adjust the temperature. It can also be used to heat the adhesive when using handheld equipment.
- IMPROVE LIQUID EFFECT: Used for thermal composite resin materials to improve its liquid effect. It can also be used to heat hand instruments for bonding.
- IMPROVE ADHESION: Use to heat resin and place prepared sickle inserts and veneers to improve adhesion, prevent premature composite hardening, and heat resin injection nozzle.
- CIRCUIT CONTROL: to use. Heating circuit control module. Can also be used to heat adhesive when used with manual equipment, filter cover. Made of metal. The filter cover can effectively prevent the resin from hardening. The light filter cover can filter blue light.
8.7Very Good
View offer on:
Show more
7
tinsayTinsay Dental Composite Resin Heater Dental AR Heat Composite Warmer
Main highlights- Technical specification: the resin composite material must tight the lid of the syringe, prevent leakage material within the heating body;
- Note: For safety, the product itself has temperature protection, and too long working time will trigger the protection mechanism. To continue using, just restart it
- AR Heat use the precision circuit control module to heat, control the temperature tolerance within 1 degree,According to your choice of material and personal preference temperature can be set up to: 40 degrees, 50 degrees and 70 degrees.
- AR Heat designed for heating composite resin material,improve the flow of its adhesive properties;At the same time it can also be used to heat adhesive when used manual equipment.
- AR Heat consist: heat the main body; power adapter;temperature indicator light; Turn on/off button; thermopreferendum button; power DC socket
8.5Good
View offer on:
Show more
8
DiocheDental Composite Heater Alloy Steel LED Display Resin Heating Machine Dental Material Warmer Immersion Heaters Warmer Machine Dental Machine Dental Equipment for Dental Care Oral Care,Easy to(US Plug)
Main highlights- SIMPLE OPERATION---Dental resin composite softener can also be used to heat manual equipments for bonding, which is easy to operate and convenient for you to use.
- PREVENT SOLIDIFY---Dental material warmer used to heat the resin and place the prepared tooth inserts and veneers to improve adhesion, prevent premature solidify.
- LED DISPLAY SCREEN---Dental composite heater adopted LED display screen, allow you can easily observe and adjust the temperature between 30‑70°C.
- IMPROVE FLUIDITY---Dental resin composite heater is designed for heating composite resin material to improve the fluidity, can also heat the resin injection nozzle.
- CONTROL---Dental composite warmer uses a circuit to control the heating module, the heating accuracy reaches 0.1℃, which is to use.
8.4Good
View offer on:
Show more
9
COSPNTDental Composite Warmer Digital Composite Resin Heater Efficient Composite Resin Material Heater 40-70℃ Precise Temp Control
Main highlights- *There are three preseted temperature for option
- *The temperature deviation is as small as±1℃.
- *Portable and easy to operate.
- *AR Heater is controlled by microcomputer.
8.3Good
View offer on:
Show more
10
LVCHENLVCHEN Dental Composite Heater Resin Warmer - Dental Resin Heater Composite Material Warmer with Light Filter Cover 3 Adjustable Temperature
Main highlights- The purpose of a resin heater is to heat composite resin in order to enhance the flow of its adhesive capabilities. When manual equipment is employed, it may also be used to heat glue for filter covers.
- Simple to use with a single keystroke. Three different types of precisely controlled temperature ranges, 40/45/50°C (104/113/122°F). Green (40 °C), Yellow (45 °C), and Red (50 °C) lights.
- Power adapter, honeycomb heating barrel, resin heating plate, light filter cover, and heating base.
- Place the resin within the round disk, cover the light filter cover, or insert it into the AR heater hole. The heating module is regulated by a precise circuit in the dental composite warmer, which keeps the temperature tolerance at 1°C.
- All goods are created by skilled producers. utilizing premium supplies. For heating composite resin materials, resin heaters with particular filter materials can exclude 99% of blue light.
8.2Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for composite resin warmer
