10 Best Cnc Tools Spare Parts In The Us - Black Friday 2024
Best Choice1
PGFUNPGFUN CNC 3D Touch Probe XYZ Axis Edge Finder 3-Coordinate Measuring Sensor Kit with 8 mm Shank & 2.0 mm Ruby Ball Tip (NPN-NO)
Main highlights- Upgraded digitizing CNC Touch Probe: the probe uses high-quality electronics for true high measurement precision and high repeatability, the fine frosted black oxidized aluminum alloy with a flat surface anti-roll/non-round shaped design, which makes it look great and protects the touch probe well from dropping.
- This 3-coordinate XYZ axis CNC probe is designed for wide DIY CNC applications, like fast zero-point acquisitions, surface flatness acquisition, measuring workpiece geometries such as edges, holes, grooves, studs, angles and corners, workpiece scanning & digitizing. ( Tips: it's developed for DIY application, not recommended for industrial use)
- Package Includes: 3D touch probe x 1, cable x 2 m/ 6.5ft, allen wrench x 1, straight probe tip x 1, wire connector kit x 1
- Main Specs: power: DC5-24V, NPN-NO wiring ( High-level IO signal output when powered and turns to Low-level signal output when Triggered), repeatability accuracy: 0.01 mm/ 0.0004 in, feedrate: 50-200 mm/min, over travel protection distance: XY- 12°, Z- 2mm/ 0.08in, XY axis trigger force: 0.5-0.82N, Z axis trigger force: 2.7N. (Note: ensure the sensitivity of the tool setter is higher than this edge finder/trigger force less than 2.7N if working with a tool setter)
- Application: theoretically it can work with MACH3, Mach4, Dynamotion, LiNUXCNC, UCCNC, Centroid CNC or any other CNC control software with a probing routine and a breakout board that will accept 3-port probe input. (contact your software, and controller manufacturer or lookup forums for probe wiring and connections)
9.6Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
RATTMMOTORRATTMMOTOR Normally Closed Mach3 CNC Automatic Tool Sensor Gauge Changer CNC Z Axis Probe Tool Touch Sensor Setter Setting 4 Wires for CNC Router Engraver Machine
Main highlights- 【Parameter】This is a normally closed 4-wire high-precision tool setting instrument with a stroke of 5mm. The positioning accuracy is 0.001mm, the contact life is up to 3 million times, the contact force is 1.5N, and the contact rating: DC24V 20mA.
- 【Material】The housing material of this tool setter is made of 4S grinding grade material. The bottom magnet design can be directly connected to the machine and firmly adsorbed to the body. The contact material is made of super hard alloy, the design is exquisite and the installation is simple.
- 【Feature-2】The tool setter will send out an alarm signal in time when it is over-travel to avoid other troubles caused by equipment operation. Moreover, the tool setter has strong anti-interference. The protruding sharp corner of the tool directly touches the tool tip related to the machining size, detects its value and size, and outputs the signal. It has higher accuracy than the average value obtained by converting the amount of light and electricity.
- 【Feature-1】This tool setting instrument is designed with dustproof and waterproof structure, which can still have strong durability under the condition of coolant and iron filings. It does not need a built-in amplifier and will not be caused deviations by the location temperature and power supply voltage fluctuations of the tool setting instrument, which can be directly input to the NC program.
- 【Description】The tool setting instrument is a special tool setting instrument for the engraving machine machining center machine. The output signal of the tool setting instrument is received by the numerical control system and then the tool length setting, tool wear detection and tool breakage are detected by the program control. In the case of no vibration and malfunction, the thermal deformation of the machine can be corrected according to the rated voltage and current and the specified speed.
9.4Excellent
View offer on:
Show more
3
JWGJWJWGJW 120034 Mini Lathe Quick Change Tool Post,Lathe Tool Holder,Axa Tool Holder
8.0 materials Quality8.0 Simple to use8.0 worth the moneyWhy we love it
High precision with 0.002mm reset accuracy.
Versatile for various lathe operations.
Durable, made from anodized aluminum and black steel.
9.3Excellent
View offer on:
Show more
4
KPALAGKPALAG Upgrade Stainless Steel Spare Wheel Handle CNC Socket Tool (Use 1/2 Inch Square Drive Ratchet) Compatible with Toyota Lexus Highlander Sienna Replace#: 51942-28010
Main highlights- 【Stainless Steel 304】: 304 stainless steel has excellent rust resistance, corrosion resistance, heat resistance and good- intergranular corrosion resistance. It more durable to use.
- 【Replace Part Number】: 5194228010, 51942-28010
- 【Function】: When you need to change a tire, this spare tire socket can provide you with great help. Simply use it in conjunction with 1/2-inch square drive ratchet and 24-25mm socket to complete the replacement, no longer requires a handle to operate, greatly saving you installation time and energy. It is the best helper for you to change a tire.
- 【Fit for】:2003-2019 Toyota Highlander, 2009-2016 Toyota Sienna,2007-2009 Lexus RX350,2006-2008 Lexus RX400h,2004-2006 Lexus RX330,2018-2022 Lexus RX350L.
- 【CNC Processing Technology】: This improved spare wheel socket adopts CNC processing technology, with a smooth surface and no burrs, ensuring the precision of product dimensions.
9.1Excellent
View offer on:
Show more
5
BTERCNC Automatic Tool Sensor Gauge, DC 24V Normally Closed CNC Z Axis Tool Setter with LED, Aluminum Alloy Z Axis Probe Tool Touch Sensor Setting Gauge for CNC Engraving Machine (Blue)
Main highlights- 【WIDE APPLICATIONS】This Z axis tool touch sensor's bottom with magnet design, can be directly connected to the machine, firmly attached to the body. It is normally closed and equipped with 2 meter oil resistant 4-core cable, can be used with most CNC equipments. Alarm can be sent when overtravel. The product adds a blowing function, which can automatically clean the counter knife surface.
- 【PREMIUM QUALITY】This Z axis touch tool setter features dustproof and waterproof layout of this tool setting instrument can still work stably under the condition of flying coolant and iron filings. When the tool setter has tripped over, an alarm should be sent out in time to avoid other troubles caused by the operation of the equipment. The shell is made of ground 4S material, and not easy to damage.
- 【MAIN FUNCTIONS】This CNC router tool is a special tool setting instrument for the engraving machine and CNC equipments. The output of it is received by the numerical control system and then the tool length setting, tool wear detection and tool breakage are detected by the program control. The sharpness corner of the tool directly contacts the tip of the tool related to the machining size, and its position and size are measured.
- 【HIGH PERFORMANCE】This automatic tool setting instrument is designed with 5mm / 0.2in stroke, 0.001mm repeat positioning accuracy, 1.5N force, with high accuracy and sensitivity. No built‑in amplifier required, no deviation due to temperature and power supply voltage fluctuations of the part where the tool is located, can be directly input to the NC and program (PLC).
- 【 QUALITY ASSURANCE】We are very confident in the quality of this automatic tool setting gauge, and provide or refund for it. Please feel to reach us if you have any questions about your purchase. We will solve your problem within 24 hours.
9.0Excellent
View offer on:
Show more
6
BTERBTER CNC Automatic Tool Sensor Gauge, DC 24V Normally Closed CNC Z Axis Tool Setter, High Accuracy Aluminum Alloy Z Axis Probe Tool Touch Sensor Setting Gauge for CNC Router Engraving Machine
Main highlights- 【WIDE APPLICATIONS】This Z axis tool touch sensor's bottom with magnet design, can be directly connected to the machine, firmly attached to the body. It is normally closed design, and equipped with cable, can be used with most CNC equipments.
- 【PREMIUM QUALITY】This Z axis touch tool setter is made of cemented carbide, with fine processing, hard and wear resistant. It features with dustproof and waterproof structure, has strong durability in the existence of coolant and iron filings.
- 【MAIN FUNCTIONS】This CNC router tool is a special tool setting instrument for the engraving machine and CNC equipments. The output of it is received by the numerical control system and then the tool length setting, tool wear detection and tool breakage are detected by the program control.
- 【HIGH PERFORMANCE】This automatic tool setting instrument is designed with 5mm / 0.2in stroke, 0.001mm repeat positioning accuracy, 1.5N force and DC24V 20mA rating, with high accuracy and sensitivity, efficient and .
- 【 QUALITY ASSURANCE】We are very confident in the quality of this automatic tool setting gauge, and provide or refund for it. Please feel to reach us if you have any questions about your purchase. We will solve your problem within 24 hours.
8.9Very Good
View offer on:
Show more
7
RATTMMOTORRATTMMOTOR Normally Open Mach3 CNC Automatic Tool Sensor Gauge Changer CNC Z Axis Probe Tool Touch Sensor Setter Setting 4 Wires for CNC Router Engraver Machine
Main highlights- 【Parameter】This is a normally open 4-wire high-precision tool setting instrument with a stroke of 5mm. The positioning accuracy is 0.001mm, the contact life is up to 3 million times, the contact force is 1.5N, and the contact rating: DC24V 20mA.
- 【Material】The housing material of this tool setter is made of 4S grinding grade material. The bottom magnet design can be directly connected to the machine and firmly adsorbed to the body. The contact material is made of super hard alloy, the design is exquisite and the installation is simple.
- 【Feature-2】The tool setter will send out an alarm signal in time when it is over-travel to avoid other troubles caused by equipment operation. Moreover, the tool setter has strong anti-interference. The protruding sharp corner of the tool directly touches the tool tip related to the machining size, detects its value and size, and outputs the signal. It has higher accuracy than the average value obtained by converting the amount of light and electricity.
- 【Feature-1】This tool setting instrument is designed with dustproof and waterproof structure, which can still have strong durability under the condition of coolant and iron filings. It does not need a built-in amplifier and will not be caused deviations by the location temperature and power supply voltage fluctuations of the tool setting instrument, which can be directly input to the NC program.
- 【Description】The tool setting instrument is a special tool setting instrument for the engraving machine machining center machine. The output signal of the tool setting instrument is received by the numerical control system and then the tool length setting, tool wear detection and tool breakage are detected by the program control. In the case of no vibration and malfunction, the thermal deformation of the machine can be corrected according to the rated voltage and current and the specified speed.
8.6Very Good
View offer on:
Show more
8
GenmitsuGenmitsu 4 Pack Hold Down Clamp Kit, CNC Router Clamp for Woodworking and Metalworking, Compatible with CNC Router Machine PROVerXL 4030 and 3040 Extension Spoilboard for CNC 3018
8.0 worth the money8.0 Simple to use8.4Good
View offer on:
Show more
9
FTVOGUEAutomatic Tool Setting Gauge Normally Closed High Accuracy 4-Lines Z-Shaft CNC Engraving Machine Parts
Main highlights- With dust-proof and waterproof structure, it has good durability under the conditions of cooling liquid and iron filings flying.
- The sharpness corner of the tool directly contacts the tip of the tool related to the machining size, and its position, size, and output are measured
- No built-in amplifier required, no deviation due to temperature and power supply voltage fluctuations of the part where the tool is located, can be directly input to the NC and program (PLC)
- Alarm can be sent when overtravel, The shell is made of ground 4S material, and not easy to damage.
- After-sales: If you have any questions after purchase, please us in time, we will answer your questions seriously and provide high-quality after-sales service.
8.2Good
View offer on:
Show more
10
YANSYUANYANSYUAN ER32 Dust Chip Extraction Nut for Woodworking Cnc Tool Milling Cutter,CNC Special Dust Removal Nut, Including Wrench (color random)
Main highlights- Strong tightness: Products sy the whole forging production，metal ，stable multiple ground smooth
- Precision accurate: By the dynamic balance testing，high precision size must have good toughness and tensile
- Optimizing carefully: Against corrosion erosion resistance，aging resistance to metal fatigue wear
- Applicable Industries: Machinery Repair Shops, Manufacturing Plant, Home Use, Woodworking Planer Spare Parts
8.1Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for cnc tools spare parts
