10 Best Cnc Coolant Systems In The Us - Black Friday 2024
Best Choice1
Stupid Simple ToolsSST LUBE-Cube Fogless Coolant Sprayer System
Main highlights- The SST LUBECUBE Low-pressure high volume fogless sprayer delivers a precisely targeted spray to the cutter and work piece without fine atomizing of coolants, eliminating toxic coolant mists or fogs that carry into the surrounding air, also reducing coolant waste.
- Fully Pressurized System for Delivers a reliable, uninterrupted continuous flow of coolant to the work piece. It’s instant on and off response, and ease of adjustment, make it a real time saver.
- Extremely tight coolant spread injects Coolant Deep Into Pockets and Holes, while also Clears Chips from Cutter and Workpiece - resulting in Higher Cutting Speeds, Increased Tool Life, and improved cut quality
- Extra high resolution knob provides fine control over coolant-to-air mixture ratio and is compatible with most coolant types and oils
- Complete kit includes EVERYTHING needed to set up targeted lubrication for milling, drilling, grinding, tapping, sawing, and lathe operations, metal forming, rolling, stamping
- Compatible with most Coolants including Trim MIST, Neatsfoot oil, WD-40, and water based coolants. NOT Compatible with IPA or certain KOOLmist Products
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
VPABESVPABES Mist Coolant Lubrication Spray System for Metal Cutting Engraving Cooling Sprayer Machine for 8Mm Air Air Pipe CNC Lathe Milling Drill
Main highlights- 【Widely Used】: This cnc mister is suitable for 8mm air ducts of CNC lathes and milling machines.
- 【Sprayable Medium】: water, alcohol, coolant, engine oil, kerosene, cooking oil.
- 【No Water Pressure Required】: Coolant mist sprayer,1KG air pressure can be sprayed.
- 【High Quality Material】: This Coolant Spray System is made of plastic, metal to meet the needs of high hardness, high toughness and high stability. High safety factor, you can use it with confidence.
- 【Easy to Use】: The nozzle of the coolant spray system is easy to operate, which can save more than 8/10 of the processing coolant, and the cooling effect will not be reduced.
9.7Exceptional
View offer on:
Show more
3
MefapeMisting Spray System for Cutting Machine, with Pump and Solenoid Valve Filter, Mist Coolant Lubrication Spray System, for Metal Cutting Engraving Lathe Milling CNC Machine
Main highlights- Works with water, coolant, alcohol, kekrosene, engine oil, cooking oil, etc.
- Used to improve the machine capacity and working speed, and extend its lifespan, ideal for CNC lathe milling metal cutting engraving processes
- Please use with air compressor with air pressure ranging 2kg-8kg
- Comes with 2x standard cooling sprayers + 1x solenoid valve + 1 air filter
- Can spray at an adjustable air pressure without requiring water pressure
9.6Exceptional
View offer on:
Show more
4
Fusion ChemicalMist Coolant for Metal Cutting Applications | Fusion Cool 2255 | Premium Synthetic Metalworking Fluid (1 Gallon)
Main highlights- This mist coolant is highly recommended for mist cooling any metal or alloy where tougher machining conditions require greater lubricity.
- This coolant is formulated with biocides to extend sump life and effectively reject tramp oil, and it will inhibit corrosion with dilutions as low as 3%. Additionally, it is a safe and mild machine coolant.
- It is particularly useful where tool pressure is exceptionally great or where the material is very abrasive. Fusion Cool 2255 provides the extra lubrication needed to protect the cutting edge of the tool.
- Excellent service in most general-purpose flood cooling applications, such as a saw coolant or CNC mister. Direct cross-over/ replacement for Kool Mist 77.
- Common applications include CNC plasma table, bandsaws, grinding, milling, turning, drilling, and other cutting operations.
9.5Excellent
View offer on:
Show more
5
QUEMARQUECoolant Lubrication Spray System, Self-priming Micro-mist Machine for Air Pipe CNC Lathe Milling Drill Machine
Main highlights- [Sprayable Medium] Water, alcohol, coolant, engine oil, kerosene, edible oil.
- [Service] If there are any questions, please feel free to contact with us, We will respond in 24 hours.
- [Package Includes] Package includes: x 2 sprayers + solenoid valve + filter.
- [Easy to Use] No water pressure, 1kg air pressure can be sprayed.
- [Application] Metal cutting engraving cooling sprayer machine for air pipe CNC lathe milling drill.
9.2Excellent
View offer on:
Show more
6
YaminieCoolant Cooling Spray Pump Kit, YS-BPV-3000 Mist Coolant Lubrication Spray System, 2 Sprayers Self-priming Micro-mist Machine for CNC Lathe Milling Drilling 110V
Main highlights- 【Sprayable Medium】Water, alcohol, coolant, engine oil, kerosene, edible oil
- 【Packing Include】Pneumatic cooling spray*2; Solenoid valve*1; Air filter*1
- 【High Efficiency】Improves the machining cutting speed and saves time, reduces the machining cost and tool wear
- 【Good Effect】 The processing coolant can be saved by more than 80%, and the cooling effect is no less than conventional water cooling
- 【Easy to Use】No water pressure, 1kg air pressure can be sprayed
9.0Excellent
View offer on:
Show more
7
WANLECYCutting Misting Spray System with Pump and Solenoid Valve Filter Sprayer Coolant Lubrication Spray System for Metal Cutting Engraving, CNC Lathe Milling
Main highlights- 【Sprayable Medium】Water, alcohol, coolant, engine oil, kerosene, cooking oil.
- 【Specification】The electromagnetic valve：11.8cm（4.65in）; Air filter：19.5cm（7.68in）; Fuel Tank Material: resin material; Fuel Tank Cover Material: A3 iron.
- 【Package Include】2 * Pneumatic cooling spray; 1 * Solenoid valve; 1 * Air filter
- 【Improve Efficiency】Designed and manufactured to increase machine capacity, cutting speed, extend tool life, save working time and production costs.
- 【Highlights】No water pressure required, 1KG air pressure can be sprayed.
8.8Very Good
View offer on:
Show more
8
WANLECYCutting Misting Spray System with Pump and Solenoid Valve Filter Sprayer Coolant Lubrication Spray System for Metal Cutting Engraving, CNC Lathe Milling
Main highlights- 【Sprayable Medium】Water, alcohol, coolant, engine oil, kerosene, cooking oil.
- 【Specification】The electromagnetic valve：11.8cm（4.65in）; Air filter：19.5cm（7.68in）; Fuel Tank Material: resin material; Fuel Tank Cover Material: A3 iron.
- 【Package Include】2 * Pneumatic cooling spray; 1 * Solenoid valve; 1 * Air filter
- 【Improve Efficiency】Designed and manufactured to increase machine capacity, cutting speed, extend tool life, save working time and production costs.
- 【Highlights】No water pressure required, 1KG air pressure can be sprayed.
8.6Very Good
View offer on:
Show more
9
Industrial Press, Inc.28% OffThe CNC Handbook: Digital Manufacturing and Automation from CNC to Industry 4.0
8.5Good
View offer on:
Show more
10
ACNAOYS-BPV-3000 Coolant Cooling Spray Pump Kit,Mist Coolant Lubrication Spray System, 2 Sprayers Self-priming Micro-mist Machine Cooling Spray Pump for CNC Lathe Milling Drilling Machine
Main highlights- 【Sprayable Medium】Water,coolant, engine oil, kerosene, edible oil.
- 【Packing Include】Pneumatic cooling spray*2; Solenoid valve*1; Air filter*1.
- 【High Efficiency】Improves the machining cutting speed and saves time, reduces the machining cost and tool wear.
- 【Good Effect】 The processing coolant can be saved by more than 80%, and the cooling effect is no less than conventional water cooling.
- 【Easy to Use】No water pressure, 1kg air pressure can be sprayed.
8.4Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for cnc coolant systems
