10 Best Cnc Bit End Mill 6mm Wood In The Us - Black Friday 2024
Best Choice1
HOZLYHOZLY Woodwork Milling Cutter ,DLC Coating ,UP & Down Cut 2 Flutes Spiral Carbide Milling Tool CNC Router Compression Wood End Mill Cutter Bits,6mm Shank ,6mm Cutting Dia ,22mm CEL Pack of 5
Main highlights- The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
- Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits.
- SOLID CARBIDE AND DLC Coating: The up and down cut spiral router bit is made of solid carbide. And DLC Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.
- HIGH PROCESSING EFFICIENCY: The edge of end mill bits is HARD and SHARP, process the heat treatment materials under 32° with high speed, reduce changing times and improve the production efficiency.
- 5PCS UP & DOWN cut spiral router bit with 6mm shank and 6mm cutting diameter, 22mm cutting length, 50mm for total length
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
OSTSOYYD6mm CNC Router Bits Sprial CNC End Mills Two Flute Spiral Upcut Milling Cutter for Wood PVC MDF Hardwood 5pcs,Flute Length 25MM
Main highlights- Perfect cutting ----6mm cnc router bits design of 2 flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal
- High efficiency ---- 6mm end mills own sharp edge which is able for fast engraving that makes high efficiency; durable, high precision and not easy to break; it is smokeless and burr-free while processing
- DIMENSIONS: 6mm cnc router bits: Shank Diameter: 6mm, Cutting edge diameter: 6mm. Cutting edge length/flute length, 0.66"(17mm). Overall length, 2"(50mm)
- 6mm end mills suitable machining material ---- MDF, ABS, PVC, acrylic, nylon, resin, plastics, density board, wood, plywood, hardwood etc
- 6mm Upcut spiral router bits used for ---- surface machining, 3D relief sculpturing, cutting, engraving, slotting, milling, carving etc
9.6Exceptional
View offer on:
Show more
3
Yosoo Health GearEnd Mill Bits 5Pcs 6mm Shank Single Flute End Mills Drill Bit Tool Tungsten Carbide CNC Router Milling Bits for Wood Aluminum Steel PCB PVC Circuit Boards Acrylic Carbon Fiber
Main highlights- [Widely Application]: This carbide end mill is widely used for engraving such as PCB PVC MDF, circuit boards, Acrylic, carbon fiber and other soft materials
- [Specification]: Shank diameter 6mm/0.23"; Length 50mm/1.97"; Cutting length: 22mm/0.86"
- [Single Flute End Mills]: 5 Pcs end mill bits; Cutting diameter 6mm
- [Premium Material]: These drill bits are made of premium tungsten carbide for good milling; High hardness, & longlasting
- [ Cutting Edges]: The milling cutter has edges, it can milling holes, s and edges on plates smoothly
9.5Excellent
View offer on:
Show more
4
OUYANG6mm Shank Spiral Router Bits Down Cut - Single Flute -3PCS Spiral End Mill CNC Router Bits, with 6mm Cutting Dia, 22-32mm Cutting Length for Acrylic PVC MDF Plywood Solid Wood
Main highlights- Widely used for CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes.
- When cutting dados or grooves with a down cut bit, be sure to slow the feed rate to allow more time for chip removal.
- Solid Carbide Spiral Router Bit with 6mm Shank,6mm Cutting Diameter, 22-32mm Cutting Length, 50-60mm for Total Length.
- Ideal For carving/cutting/engraving/milling/slotting/sculpturing in materials like MDF, ABS, PVC, acrylic, nylon, resin, plastics, density board, wood, plywood, hardwood etc.
- High precision grinded and polished, high abrasion resistance and temperature resistance, good rigidity, not easy to break.This is a down-cut bit, It is great for cutting shallow dados, rabbets, and visible slots.
9.4Excellent
View offer on:
Show more
5
HOZLYHOZLY 6X25mm UP &Down Cut Two Flutes Spiral Carbide Tool Cutters for CNC Router Compression Wood End Mill Bits
Main highlights- Without sticking, smokeless, odorless and silent during processing
- Long service life, not easy to break
- Excellent edge-grinding technology
9.2Excellent
View offer on:
Show more
6
OUYANG5Pcs Tapered Ball Nose Router Bit Set- 6mm Dia Shank, Solid Carbide, Spiral End Mills for 3D CNC Carving of Wood, Plastic, Soft Metal
Main highlights- WIDE APPLICATION: This end mill with spiral end is perfect for CNC woodworking, metal engraving, mold making, detail carving, 2D/3D engaraving, fine detail work;
- SPECIFICATION：2 flute, Helix angle:35 Degree, 0.5-2mm tip diameter, 6mm shank, H-Si coating, 55HRC, can be used on CNC milling machine and;
- DURABLE AND PRECISE: This tapered end mills deliver exceptional durability and precise results, even during demanding projects.
- APPLICABLE MATERIALS: 3D engraving bits, suitable for 2D/3D carving Hardwood, Plywood, Softwood, OAK, etc.
- 2-FLUTE DESIGN: Each tapered end mill is crafted with a 2-flute, ball nose and spiral design, ensuring smooth and efficient cutting through various materials.
9.1Excellent
View offer on:
Show more
7
uxcelluxcell 5PCS 1/8" Shank 1.5mm x 6mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood
Main highlights- Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines.
- Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life.
- Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground.
- Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use
- 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8"; Cutting Diameter: 1.5mm / 0.06"; Cutting Length: 6mm / 0.24"; Overall Length: 38mm / 1.5"; Number of Flutes: 2 Flutes
9.0Excellent
View offer on:
Show more
8
uxcelluxcell Square Nose End Mill, 6mm Tip Dia Solid Carbide AlTiN Coated CNC Router Bits 4 Flute Spiral Milling Cutter HRC55 with 6mm Shank 75mm (3-inch) Length
Main highlights- Wide Applications: Suitable for cutting carbon steel, malleable cast iron, alloy steel, stainless steel, die steel, tool steel, heat treated steel. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- Tips: The longer the length of the tool clamped by the chuck, the better. Combined with the material to be processed, select an appropriate feed rate and cutting speed to obtain better processing accuracy and performance.
- Square Nose End Mill: Cutting Diameter: 6mm / 0.24"; cutting flute length: 25mm / 0.98"; shank diameter: 6mm / 0.24"; overall length: 75mm / 3"; cutting hardness: HRC55; spiral angle: 35 degree.
- Solid Carbide Tool: M30 carbide end mill cutter is super fine grain carbide, with high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance. Carbide can run at higher speed than high-speed steel.
- Features: Square end cut, 4-flute design, spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. AlTiN composite coating can increase hardness, reduce oxidation wear for better wear resistance and extend tool life.
8.9Very Good
View offer on:
Show more
9
uxcelluxcell End Mill CNC Router Bits, 0.8mm x 6mm 1/8" Shank Diamond Film Coated Carbide Engraving Bit Milling Cutter Right Hand for PCB Plastic Fiber Wood 10pcs
Main highlights- Wide Applications: Suitable for engraving and milling printed circuit boards, PCB, MDF, ABS, PVC, acrylic, nylon, plastic, wood, fiber glass, carbon fiber, density board, plasterboard, etc. Use on CNC machining centers, machine tools, precision engraving machines and other equipment.
- Tips: The longer the length of the tool clamped by the chuck, the better. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
- Special Coating: Processed by CVD (chemical vapor deposition), the diamond film coating is very close to natural diamond, with high hardness, high elastic modulus, high thermal conductivity, good self-lubrication and chemical stability.
- End Mills: Cutting edge diameter: 0.8mm / 0.031"; shank diameter: 3.175mm / 1/8"; cutting edge length: 6mm / 0.236"; overall length: 38mm / 1-1/2"; milling direction: right hand; style: corn shape. Sharp cutting edge provides smooth cutting and no glitches.
- Carbide Tools G05 tungsten carbide tools has high hardness (HRC94.5), wear resistance, good toughness and heat resistance. With good milling and cutting performance, carbide material can ensure high work efficiency. Carbide can run at higher speed than high-speed steel.
8.8Very Good
View offer on:
Show more
10
SHARPROSHARPRO 6mm Shank End Mill Bit 6mm Cutting Dia. 6 Flutes AlCrN Coated Carbide Square CNC Milling Router Bit, Apply for Alloy Steel, Stainless Steel, Cast Iron and Aluminum Cutting
Main highlights- Specification: 6mm shank & cutting DIA., 16mm cutting length and 50mm OVL.. Up to HRC45 hardness metals applies to Alloy Steel, Stainless Steel, Cast Iron, and Aluminum.
- Precise: -0.02mm close tolerance guaranteed by 100% quality-check requirements. Variable tooth spacing reduces resonance, minimizing errors due to tool vibrations.
- Durable: AICrN coated improved heat resistance and wearing quality compared with AITBN, as it contains higher Aluminum.
- Compatibility: Compatible with CNC milling machines, CNC product centers, and milling machines, making it versatile for various machining tasks.
- Brand: High-quality guaranteed by SHARPRO self-owned, our factory is equipped with top global brands automation machines, and the unit-level unique serial code enables quality tracking along the way of production.
8.6Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for cnc bit end mill 6mm wood
