Clone Hdd Docking Station

#1

Best Choice

Zopsc USB 3.0 SATA/IDE HDD Docking Station Three-Bay Offline Clone HUB Reader 12V / 3A Independent Power Supply External Hard Drive Docking Station(US) 100-240V

9.7

Zopsc

Main highlights

Plug and Play andDriver-: Tool installation, no driver needed, plug and play, support hot plug.Simultaneously read two hard drives (6TB * 2), two USB2.0 expansion HUB interfaces.Support M2 / MS / TF / SD / MMC / MS / CF / XD slot (Max64GB memory card, NOT included).LED indicator shows the read and write status of hard disk and power supply, clear and convenient

High Performance: This three-bay drive docking station supports 2.5 and 3.5inch SATA/IDE HDD, direct plug bare disc without installing. Besides, it supports hard disk offline clone. And it can simultaneously read two hard disk drives (6TB * 2), two USB2.0 expansion HUB interfaces.Universal external USB3.0 to SATA three-bay hard drive docking station

Fast Speed: USB3.0_AF interface, USB3.0 data transfer rate up to 5Gbps.USB2.0 data transfer rate up to 480Mbps.Support hard disk offline clone, namely, data can be copied from disc B/C to disc A while the hard disc does not connect to the computer (the capacity of disc B/C must be less than or equal to disk A's). And offline clone speeds up to 70-100MB/s (vary according to the specific hard drive speed)

#2

Value for Money

SABRENT USB Type-C Lay Flat Docking Station for M.2 PCIe NVMe + SATA 2.5'"/3.5" SSD & HDD with Offline Clone Function [DS-UFNC]

9.4

SABRENT

-28%

Main highlights

Transfer or Clone: Can operate in either single- or dual-drive mode for data transfer. Supports convenient offline cloning between two drives. A power adapter is included to supply enough power for 3.5” HDDs and high-power SSDs.

Speedy USB: Can transfer at up to 10Gbps (USB 3.2 Gen 2) with an appropriate USB host port and is backward compatible. Supports both TRIM and UASP for reliability and performance. USB Type-C/Type-A to Type-C cables are included for convenience and compatibility.

Dock and Walk: The USB Type-C Flat Docking Station (DS-UFNC) supports M.2 PCIe NVMe SSDs and 2.5”/3.5” SATA SSDs and HDDs simultaneously with tool-free installation. Transfer data over USB or clone offline with one or two drives. Built for ease and reliability.

-28%

#3

SABRENT USB 3.0 to SATA I/II/III Dual Bay External Hard Drive Docking Station for 2.5 or 3.5in HDD, SSD with Hard Drive Duplicator/Cloner Function [20+TB Support] (EC-HD2B)

9.3

SABRENT

Why we love it

Supports large hard drives up to 20+TB.

Easy plug and play, no drivers needed.

Fast transfer speeds up to 5Gbps.

Main highlights
                                  
                                    Supports Multiple Drive Types and Capacities
                                
Supports Standard Desktop 2.5/3.5 SATA Hard Drives or SSD, up to 20+TB. Plug and play with no drivers needed. Transfer speeds up to 5Gbps.

                                    Ideal for Cloning and Data Backup
                                
Perfect for cloning hard drives, upgrading client computers, and creating backups. Supports offline cloning up to 60MBps and works with various operating systems.

                                    Highly Praised for Convenience and Versatility
                                
Customers appreciate the ability to swap drives easily, use multiple drives simultaneously, and the offline cloning feature. Ideal for managing large media files.

#4

Inateck RGB SATA to USB 3.0 Hard Drive Docking Station with Offline Clone, for 2.5 and 3.5 Inch HDDs and SSDs, UASP Supported, Black SA02003

9.2

Inateck

Why we love it

The RGB LED quickly flashes when there is a hard drive working in the docking station.

The docking station can operate offline cloning independent from a computer.

The docking station supports UASP, which provides even faster data transfer.

Main highlights
                                  
                                    Key Features
                                
Features RGB LED, offline clone function, fast USB 3.0 and UASP support, wide HDD/SSD compatibility. Enhances data management and aesthetics.

                                    Ideal Use Cases
                                
Perfect for data backup, system upgrades, and data recovery tasks. Ideal for IT professionals, creative professionals, and tech enthusiasts.

                                    Customer Praise
                                
Most reviews highlight its easy setup, high-speed data transfer, and the reliability of the offline cloning feature as top benefits.

#5

FIDECO USB 3.2 Gen 1 to Hard Drive Docking Station, Hard Drive Dock for 2.5 or 3.5 inch SATA I/II/III HDD SSD with Hard Drive Duplicator/Offline Clone Function and 2 USB Cables, Support UASP

9.1

FIDECO

-10%

Why we love it

Type C port

Universal compatibility

UASP USB 3.2 Gen 1 speed

Main highlights
                                  
                                    Key Features and Benefits
                                
Supports 2.5/3.5 SATA HDD/SSD, UASP USB 3.2 Gen 1 for fast data transfer, and offline clone feature for easy data duplication.

                                    Ideal Use Cases
                                
Perfect for IT professionals, content creators, and individuals needing efficient file transfers, backups, or disk cloning without a computer.

                                    Customer Praise
                                
Most reviews highlight the dock`s ease of use, reliability for data transfer and backup, and exceptional compatibility with various operating systems.

-10%

#6

CENMATE 4 Bay Hard Drive Docking Station with Offline Clone, USB 3.0 to SATA I/II/III Hard Drive Reader for 2.5/3.5 Inch HDD/SSD(Supports 18TB*4, Up to 6Gbps Under UASP)

8.9

cenmate

Main highlights

【High-speed and Stable offline clone】Cenmate hard drive cloner supports offline clone. No computer is needed! Please note that the capacity of the target HDD needs to be equal to or larger than that of the source HDD. The hdd enclosure is equipped with progress indicators to help you quickly understand the working status.

【False-touch design】In order to prevent the loss of data due to misuse, the Cenmate dual hard drive reader is designed to manually switch the cloning/copy function and PC data transfer function.You can switch modes according to your needs.NOTE:Before powering up, toggle the cloning switch and then power up the unit so that it can be successfully cloned.Before cloning you need to make sure that Target HDD 2/3/4 ≥ Source HDD,Most of the reasons for cloning failure are target HDD 2/3/4 < Source HDD.

【72TB Capacity】This 3.5 hard drive enclosure supports up to 4x 18TB hard drives, Support 2.5 inch/3.5 inch SATA I/II/III HDD/ SSD.

#7

SABRENT USB Type C SATA 2.5” & 3.5” Dual Bay Hard Drive Docking Station | Offline Cloning | Up to 5Gbps | Tool Free Installation (EC-CH2B)

8.8

SABRENT

#8

ikuai SATA to USB 3.0 Dual Bay Hard Drive Dock for 2.5"/3.5" SATA HDD SSD with Micro SD Card Reader 2 USB 3.0 Port, Offline Clone Function External Hard Drive Docking Station, 2X20TB and UASP Support

8.7

ikuai

Why we love it

Dual bay docking station

Offline clone feature

Reliable power supply

Main highlights
                                  
                                    Key Features
                                
Supports 2.5/3.5 SATA HDD/SSD up to 20TB, UASP protocol, offline clone function, USB 3.0 for up to 6 Gbps transfer speed.

                                    Ideal Use Cases
                                
Perfect for data backup, disk cloning, upgrading PC storage, transferring large files between devices, and gamers or professionals with extensive data needs.

                                    Customer Praise
                                
Most reviews highlight its ease of use, high-speed data transfer, and the reliable offline cloning feature as top benefits.

#9

LINKEET SATA to USB 3.0 Dual-Bay Hard Drive Docking Station with Offline Clone for 2.5 & 3.5-inch HDD/SSD, Hard Disk USB Hub with 2* USB 3.0 Port, MS/CF/TF/SD Card Readers, Support 2*10TB, Black

8.4

LINKEET

Main highlights

Offline Clone: The external hard drive dock supports offline clone, backup source disk to target disk automatically without connecting to computer. LED indicators for cloning progress: 25%-50%-75%-100%. Press clone button for 5 seconds until the indicators start to flash, then press clone button again to start cloning process.

Fast Data Transfer: Transfer your hard drive data to your computer via USB 3.0 port which provide 5Gbps bandwidth. Support UASP, USB 2.0 and USB 1.1. Built in MS, CF, TF, SD 3.0 card readers, up to 5Gbps, and all sockets can be used at the same time.

8-in-1 Hard Drive Hub: Besides 2 SATA hard drive slots, the hard drive dock provides you 6 other ports. Includes 2*USB 3.0 ports, 1*MS card socket, 1*SD card socket, 1*CF card socket, 1*Micro SD(TF) card socket. A perfect solution for backup and processing IT data, batch processing data, formatting, file transfers, data recovery etc.

#10

ORICO Hard Drive Docking Station Dual Bay USB 3.0 to SATA with Duplicator/Offline Clone Function External Hard Drive Dock for 2.5''/3.5'' HDD SSD Max Up to 40TB Support UASP Plug&Play-DD-C

8.3

ORICO

Why we love it

Full compatibility with SSD/HDD up to 36TB

Offline clone duplicator function

Durability high speed protocol

Main highlights
                                  
                                    Key Features and Benefits
                                
Supports 40TB capacity, offline clone function, and high-speed USB 3.0 with UASP &Trim, ensuring effective data management and transfer.

                                    Ideal Use Cases
                                
Perfect for data backup, disk cloning, and expanding storage on PCs, laptops, smart TVs, PS4, and supports Windows, Mac, Linux, and Android.

                                    Customer Reviews Highlight
                                
Most praised for its easy setup and reliable offline cloning feature, enhancing productivity without needing a computer connection.

clone hdd docking stations

Zopsc USB 3.0 SATA/IDE HDD Docking Station Three-Bay Offline Clone HUB Reader 12V / 3A Independent Power Supply External Hard Drive Docking Station(US) 100-240V

9.7

Main highlights

SABRENT USB Type-C Lay Flat Docking Station for M.2 PCIe NVMe + SATA 2.5'"/3.5" SSD & HDD with Offline Clone Function [DS-UFNC]

9.4

Main highlights

SABRENT USB 3.0 to SATA I/II/III Dual Bay External Hard Drive Docking Station for 2.5 or 3.5in HDD, SSD with Hard Drive Duplicator/Cloner Function [20+TB Support] (EC-HD2B)

9.3

Why we love it

Main highlights

Inateck RGB SATA to USB 3.0 Hard Drive Docking Station with Offline Clone, for 2.5 and 3.5 Inch HDDs and SSDs, UASP Supported, Black SA02003

9.2

Why we love it

Main highlights

FIDECO USB 3.2 Gen 1 to Hard Drive Docking Station, Hard Drive Dock for 2.5 or 3.5 inch SATA I/II/III HDD SSD with Hard Drive Duplicator/Offline Clone Function and 2 USB Cables, Support UASP

9.1

Why we love it

Main highlights

CENMATE 4 Bay Hard Drive Docking Station with Offline Clone, USB 3.0 to SATA I/II/III Hard Drive Reader for 2.5/3.5 Inch HDD/SSD(Supports 18TB*4, Up to 6Gbps Under UASP)

8.9

Main highlights

SABRENT USB Type C SATA 2.5” & 3.5” Dual Bay Hard Drive Docking Station | Offline Cloning | Up to 5Gbps | Tool Free Installation (EC-CH2B)

8.8

Main highlights

ikuai SATA to USB 3.0 Dual Bay Hard Drive Dock for 2.5"/3.5" SATA HDD SSD with Micro SD Card Reader 2 USB 3.0 Port, Offline Clone Function External Hard Drive Docking Station, 2X20TB and UASP Support

8.7

Why we love it

Main highlights

LINKEET SATA to USB 3.0 Dual-Bay Hard Drive Docking Station with Offline Clone for 2.5 & 3.5-inch HDD/SSD, Hard Disk USB Hub with 2* USB 3.0 Port, MS/CF/TF/SD Card Readers, Support 2*10TB, Black

8.4

Main highlights

ORICO Hard Drive Docking Station Dual Bay USB 3.0 to SATA with Duplicator/Offline Clone Function External Hard Drive Dock for 2.5''/3.5'' HDD SSD Max Up to 40TB Support UASP Plug&Play-DD-C

8.3

Why we love it

Main highlights

Similar products on Amazon

clone hdd docking stations

Zopsc USB 3.0 SATA/IDE HDD Docking Station Three-Bay Offline Clone HUB Reader 12V / 3A Independent Power Supply External Hard Drive Docking Station(US) 100-240V

9.7

Main highlights

SABRENT USB Type-C Lay Flat Docking Station for M.2 PCIe NVMe + SATA 2.5'"/3.5" SSD & HDD with Offline Clone Function [DS-UFNC]

9.4

Main highlights

SABRENT USB 3.0 to SATA I/II/III Dual Bay External Hard Drive Docking Station for 2.5 or 3.5in HDD, SSD with Hard Drive Duplicator/Cloner Function [20+TB Support] (EC-HD2B)

9.3

Why we love it

Main highlights

Inateck RGB SATA to USB 3.0 Hard Drive Docking Station with Offline Clone, for 2.5 and 3.5 Inch HDDs and SSDs, UASP Supported, Black SA02003

9.2

Why we love it

Main highlights

FIDECO USB 3.2 Gen 1 to Hard Drive Docking Station, Hard Drive Dock for 2.5 or 3.5 inch SATA I/II/III HDD SSD with Hard Drive Duplicator/Offline Clone Function and 2 USB Cables, Support UASP

9.1

Why we love it

Main highlights

CENMATE 4 Bay Hard Drive Docking Station with Offline Clone, USB 3.0 to SATA I/II/III Hard Drive Reader for 2.5/3.5 Inch HDD/SSD(Supports 18TB*4, Up to 6Gbps Under UASP)

8.9

Main highlights

SABRENT USB Type C SATA 2.5” & 3.5” Dual Bay Hard Drive Docking Station | Offline Cloning | Up to 5Gbps | Tool Free Installation (EC-CH2B)

8.8

Main highlights

ikuai SATA to USB 3.0 Dual Bay Hard Drive Dock for 2.5"/3.5" SATA HDD SSD with Micro SD Card Reader 2 USB 3.0 Port, Offline Clone Function External Hard Drive Docking Station, 2X20TB and UASP Support

8.7

Why we love it

Main highlights

LINKEET SATA to USB 3.0 Dual-Bay Hard Drive Docking Station with Offline Clone for 2.5 & 3.5-inch HDD/SSD, Hard Disk USB Hub with 2* USB 3.0 Port, MS/CF/TF/SD Card Readers, Support 2*10TB, Black

8.4

Main highlights

ORICO Hard Drive Docking Station Dual Bay USB 3.0 to SATA with Duplicator/Offline Clone Function External Hard Drive Dock for 2.5''/3.5'' HDD SSD Max Up to 40TB Support UASP Plug&Play-DD-C

8.3

Why we love it

Main highlights

Similar products on Amazon

MAIWO Dual Bay Hard Drive Docking Station with Offline Clone for 2.5 3.5 Inch SATA HDD SSD, 3X USB 3.0 Hub Extension, 44TB Capacity, External Hard Drive Duplicator Cloner

WAVLINK Dual Bay Hard Drive Docking Station - USB 3.0 to SATA I/II/III for 2.5" & 3.5" HDD/SSD with Fixed Bezel, Supports Offline Clone/Duplicator Function, Supports 2x20TB with UASP 6Gbps - Black

FIDECO Hard Drive Docking Station, USB 3.0 SATA HDD Docking Station for 2.5 & 3.5 inch SATA HDD/SSD, Dual Bay, Support Offline Clone and UASP

WAVLINK USB 3.0 and USB C to SATA Dual-Bay External Hard Drive Docking Station for 2.5/3.5 Inch HDD/SSD with UASP (6Gbps), Support Offline Clone/Duplicator Function [16TB X2 ]-Black

CENMATE Dual Bay Hard Drive Docking Station with Offline Clone, USB A/C 3.0 to SATA, Hard Drive Reader for 2.5/3.5 Inch HDD/SSD(Supports 18TB*2, Up to 6Gbps Under UASP)

MAIWO External Hard Drive Docking Station with Offline Clone for 2.5/3.5" SATA HDD/SSD, 5Gbps with UASP, 44TB Capacity, Dual Bay USB 3.0 to SATA Adapter Duplicator

Hard Drive Docking Station RSHTECH USB 3.0 Aluminum Dual Bay Hard Drive Dock for 2.5" & 3.5" SATA HDD SSD with SD/Micro SD Card Reader and Offline Clone/Duplicator Function Support 16TB Tool-Free

ineo USB 3.1 Gen1 to SATA 2.5" or 3.5 inch SSD/HDD Docking Station (Clone Docking)

SABRENT USB C Docking Station for M.2 PCIe/NVMe and SATA 2.5/3.5 Inch SSD & HDD with Offline Cloning (DS-UNHC)

ORICO 4 Bay External Hard Drive Docking Station USB 3.2 Gen 1 to SATA I/II/III for 2.5''/3.5'' HDD SSD with Hard Drive Duplicator/Cloner Function Support UASP [4 x 20TB]-6648US3

More products you might like

Sign up and get exclusive special deals