10 Best Circuit Ups 18650 5v In The Us - Black Friday 2024
Best Choice1
GeekwormGeekworm 12V/5V Dual Output Universal SBC Stackable Uninterruptible Power Supply UPS Shield X-UPS1 Compatible with Raspberry Pi/Orange Pi/Jetson Nano/Rock Pi/Tinker Board
Main highlights- Stackable Design: X-UPS1 can be stacked to increase output current and battery life, each board provides max 3A power backup; Stack several X-UPS1 to provide long-lasting and higher output power for 24/7
- Specifications: Power input (Single board) : 6-24Vdc ±5%, ≥3A; UPS output voltage : 12Vdc ±5%, 5.1Vdc ±5% UPS output current (Single boards) : Max 3A; UPS charging current (Single board) : 2.3~3.2A
- Packing List: 1 x X-UPS1 Expansion Board(not include battery); 1 x 4Pin PH2.0 to dupont cable; 1 x VH3.96 to DC5525 Cable; 1 x XH2.54 to DC5521 Cable; 1 x GPIO Header; 1 x Screws Pack
- Note: The development board or batteries are not included in the packing list
- Multi Function: Wide power input 6-24V;AC power loss or power adapter failure detection;Low voltage detection; Auto power on; Protection of battery cell reverse connection
- Compatibility: Compatible with most Single Board Computers (SBC) that uses 12Vdc or 5Vdc, such as Orange Pi 5/5B/4B, Raspberry Pi 5/4B/3B+/3B, Jetson Nano, Jetson Orin Nano, Jetson AGX Orin,Tinker Board, Rock Pi, Arduino etc
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
GeekwormGeekworm X1200 5V UPS HAT Shield for Raspberry Pi 5|Max 5.1V 5A Output|Auto Power On|Safe Shutdown|Power Loss Detection Function
Main highlights- Versatile Design: X1200 is designed to be attached at bottom and don't use the 40-pin header, enabling easy stacking with other Raspberry Pi accessory boards
- User Manual: Google Geekworm WiKi search X1200 and refer to user manual for hardware and software guide
- Packing List: 1 x X1200 5V UPS Shield, 1 x M2.5 x 5 mm screws; Not include Raspberry Pi 5, batteries or power adapter
- How to Power: Power via X1200 USB-C port: 5Vdc 5A via USB Type-C; Do not apply power to Raspberry Pi 5 via the Type-C USB socket
- Function: X1200 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, power loss and power adapter failure detection
- Compatibility: Pi 5 UPS HAT compatible with Raspberry Pi 5 8GB/4GB; Model: X1200, Matching Case is X1200-C1
- 2-Cell Battery Supported: Battery length max 65.3mm, diameter max 18.5mm; NOT include batteries
9.5Excellent
View offer on:
Show more
3
waveshareTOP1 UPS HAT for Raspberry Pi 5V Uninterruptible Power Supply Multi Battery Protection Circuits Supports 18650 Lithium Battery
Main highlights- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- Onboard 5V regulator, up to 2.5A continuous output current, 5V USB output, convenient for powering other boards
- Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
- I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
- Batteries warning indicators, easy to check if the battery is connected correctly
9.2Excellent
View offer on:
Show more
4
DWEIIDWEII 3pcs Type-C 15W 3A Fast Charge UPS Power Supply / 18650 Lithium Battery Charger Module DC-DC Step Up Booster Converter 5V 9V 12V （5V）
Main highlights- UPS function: When the power supply is powered, the power supply directly supplies power to the load through the boost circuit, and at the same time charges the lithium battery. 1 the power is cut off, the battery path is automatically started to supply power to the load via the boost circuit.
- The module is equipped with two 18650 battery sockets, a universal Micro USB charging port, and direct DC5V input to charge the lithium battery.
- The 5V charging power supply used by individual users uses an output capacitor with a larger capacitance value. This capacitor can continue to discharge after the power supply is powered off, so that the power supply voltage has a slow down process, which will cause the board to not switch battery power supply quickly after the power supply is turned off. If you encounter such a situation, you can connect a discharge resistor of about 1K at the 5V input port.
- Equipped with dual color LED to indicate the charging state, the green light is always on when it is fully charged, and the charging stops automatically.
- Boost circuit: peak power up to 20W, rated power up to 15W,BOST boost circuit, built-in 12A high current MOS, efficiency up to 96%, module static power consumption 25mA, optional 5V/9V/12V output. (Load normal recommendation <15W. Output 5V: Current 3A ；Output 9V: Current 1.6A ； Output 12V: Current 1.2A)
9.1Excellent
View offer on:
Show more
5
BistookBistook 4pcs 18650 or 21700 Charging Module Dual USB 5V 3A Mobile Powerbanks Module 18650 Lithium Battery Charger Board with Overcharge Overdischarge Short Circuit Protection DIY USB Battery Pack
Main highlights- 5.Helpful Tips & Satisfactory Service: This product is suitable for DIY. If there are any issues with the product, it can be returned within 30 days of receipt in its original condition for a full refund or replacement. If you have any questions, please contact us.
- 4.Convenience: The charging module supports 18650, 21700 lithium batteries, or polymer lithium batteries, enabling quick DIY for creating your own power bank or battery charger. It outputs a maximum current of 5V/3.0A, convenient for powering devices with larger battery capacity, such as mobile phones and tablet computers, offering flexibility and convenience anytime, anywhere.
- 3.Protocol Protection: Includes safeguards such as overcharge protection, overdischarge protection, short circuit protection, and constant current.
- 2.Four Ports: The charging module is designed with four ports, including 2 USB-A output ports, 1 USB-Micro input port, and 1 USB-C input/output port. The USB-C supports a maximum input and output of 18W, compatible with PD3.0 18W. USB-A1 outputs support 5V3A, 9V2A, 12V1.5A, and support QC3.0/2.0, AFC, FCP, PE1.1/2.0, BC1.2-DCP protocols at 5V1.5A. USB-A2 outputs APPLE 5V0.5A, BC1.2 DCP 5V1.5A. The USB-Micro input port supports 5V 10W (Max).
- 1.Digital Battery Level Display: Equipped with a digital battery level display, capable of showing a range from 0-100%. Press the button to conveniently view the battery level indicator.
8.9Very Good
View offer on:
Show more
6
UMLIFEUMLIFE 4pcs 18650 Charging Board ，Dual USB 5V 2.4A Mobile Power Bank Module 186 50 Lithium Battery Charger Board with Overcharge Overdischarge Short Circuit Protection DIY USB Power Bank Board
Main highlights- overcharge protection, overdischarge protection, short circuit protection, constant current.Suggest Working Conditions:Max continuous charge/discharge current 1.5/2.4A,working temperature: -5～45℃.
- Size: 6.5 * 2.5 * 0.1cm;
- Dual Output Current: 5V 2.4A；Constant Current: 2.4A;
- Charging cable: support three USB data cable charging, including for Iphone and Android.
- Attention : The positive pole of the battery is connected to B+ and the negative pole is connected to B-, do not reverse it. If it is reversed, it will burn out
8.8Very Good
View offer on:
Show more
7
waveshareWaveshare Uninterruptible Power Supply (UPS) Module, Supports Charging and Power Output at The Same Time, 3S & 5V 5A Output, Compatible with Raspberry Pi Board
Main highlights- The batteries required for this module are NOT included, please purchase the correct batteries seperately according to the instruction. With online development resources and manual, please refer to while using
- Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi and Jetson Nano. Batteries warning indicators, easy to check if the battery is connected correctly
- Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
- It is able to charge the batteries and provide power output at the same time from external power supply. Automatically switch over to batteries output if external power supply is unavailable, keeps the system running without any trouble
- Adapting various interfaces via cables, easy to integrate into mobile robots or industrial control equipment. I2C bus communication, monitoring the batteries voltage, current, power in real time
8.5Good
View offer on:
Show more
8
GeeekPiGeeekPi UPS V5 Power Supply Uninterruptible UPS HAT for Raspberry Pi, Support 18650 Battery Charger Power Bank Power Management Expansion Board 5V for Raspberry Pi 5/4B/3B+/3B/2B/B+/B/A+/A
Main highlights- UPS Plus is a new generation of UPS power management module which supports OTA firmware upgrade and supports RTC onboard.
- There are two INA219 chip onboard to detect batteries voltage and the voltage output from UPS Plus to Raspberry Pi.
- Package Inlcudes:1 x UPS Plus For Raspberry Pi,4 x M2.5 copper pillar,4 x M2.5 screws,4 x M2.5 long copper stick,4 x M2.5 nuts,1 x Acrylic shield,1 x Instruction
- Compatible with Raspberry Pi 5/4B/3B+/3B/2B/B+/B/A+/A
8.4Good
View offer on:
Show more
9
FafeicyHigh Power UPS Battery Boost Charging Module Step Up Charger Board Lithium Battery Charging Boost Module for 18650 Lithium Battery (5V)
Main highlights- UPS POWER SUPPLY: UPS uninterruptible power supply function, when the power supply has power, the power supply directly supplies the load through the boost circuit.
- POWER SWITCHING: Lithium battery boost charging module, with UPS circuit, can realize power supply switching between power supply and battery without delay.
- MODULE INTERFACE: The module is equipped with two 18650 battery sockets, a universal Micro USB charging port, and direct DC5V input to the lithium battery.
- LED INDICATOR: Equipped with color LED to indicate the charging state, the green light is always on when it is fully charged, and the charging stops automatically.
- GOOD PROTECTION: Once the power is cut off, the battery path will start automatically, and power will be restored to the load after power on, with short circuit, overvoltage, undervoltage protection.
8.1Good
View offer on:
Show more
10
MakerFocusMakerFocus Raspberry Pi 4 Battery Pack UPS, RPI Pack Standard 10000mAh Raspberry Pi Battery USB Pack Raspberry Pi Latest Version V3Plus Expansion Board Power Supply Type-C for RPI 5 4B 3B+ 3B 2B+
Main highlights- Two output modes: In addition to the regular output via the USB port, the V3P output interface adds an LC filter, the ripple is about 20mV under no-load condition, and the ripple is about 50mV when Raspberry Pi 4 is connected
- The link to the assembly video is available on the product page, Two power supply modes: outdoor portable type and indoor UPS power supply mode: 1) As an outdoor portable power supply, the main board is powered by a lithium battery. The maximum external power supply capacity is: 5.1V. 2.5A. 2) As an indoor UPS power supply mode: the UPS power supply interface is connected to an external 5V power supply, the power supply requires 5V 2A-3A, and the maximum output current can reach 5V 3A
- The UPS has overcharge and overcurrent protection functions: When the UPS externally outputs about 4A, the UPS will consider the external circuit to be in a short-circuit state and automatically cut off the output. The lithium battery board that comes with the UPS has an overcharge and overdischarge protection board. Prevents the battery from being overcharged and overdischarged when the external circuit is abnormal, thereby reducing the possibility of damage to the battery
- Note: If you use UPS to power Raspberry Pi 3B/3B+ while charging, please make sure that the input power is not less than 2.5A. Recommended use: 3V 2.5A power supply
- 4+2LED are designed to show the status of battery power, charge or discharge:1) 4 Battery power LEDs: Used to show the current battery voltage and power. 2)The function of the Power LED is to display whether the UPS is supplying power to the Pi, and the LED is on: it means the output is 5V. LED off: Indicates that there is no voltage at the output. 3) Charging indicator LED: When the UPS is externally charged via the TYPE-C USB interface, the Charge LED starts to work
7.9Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for circuit ups 18650 5v
