10 Best Charging Power Current Meter In The Us - Black Friday 2024
FNIRSI USB Tester 4-28V 7A LCD USB A&C Voltage Current Power Tester Multimeter, Fast Charge Detection Trigger Capacity Ripple Measurement, PD2.0/PD3.0,QC2.0/QC3.0
Main highlights- 【Updated USB Tester】FNIRSI FNB58 has a 2.0-inch TFT LCD display, integrated USB-A, Micro-USB, Type-C interface. It is a USB voltage andcurrent detection meter and a mobile communication terminal fast charging trigger with gravity sensor
- 【USB tester detection function】The resistance measurement of the wire by the differential pressure method. E-Marker Cable chip reading. DASH Cable data reading. Record of startup time. Onboard temperature measurement. PD monitor. Analog DASH cable
- 【Parameter Recording】The highest six-digit display of voltage, current and power. 10 sets of switchable capacity, power etc. Support low-speed waveform drawing, 2 sps-100 sps sampling rate. Support high-speed ripple drawing, up to 4 M sps sampling rate
- 【Note】In order to respond to the environmental protection policy and reduce the use of paper, FNB58 does not come with paper manuals. You can visit the website of FNIRSI on the box to download the manuals, including product update firmware, APP, etc
- 【Multifunction USB Digital Tester】FNB58 uses external 16-bit ADC, PD protocol physical chip. FNB58 USB tester can monitor the voltage, current, power, resistance, capacity, D+/D- voltage etc, it can be used to test the fast charging protocol of chargers
- 【Fast Charge Protocol Trigger Detection】FNB58 supports QC2.0/QC3.0, FCP/SCP, AFC, PD2.0/3.0, VOOC/WARP, Super VOOC 1.0/2.0 trigger. The above protocols all support automatic monitoring. MTK-PE automatic detection. Support QC2.O->PD2.0 protocol conversion
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
FNIRSIFNIRSI USB Tester 4-24V 6.5A LCD USB A&C Voltage Current Power Display Multimeter, Fast Charge Detection Trigger, PD2.0/PD3.0,QC2.0/QC3.0, CNC Metal Shell
Main highlights- 【Widely Use】It can be used to measure the power supply or power consumption such as USB interfaces, mobile phone chargers, and U disks.Support low waveform drawing, 2sps->100sps sampling rate. Support high ripple drawing up to 3.2M sps sampling rate
- 【Updated Designed USB Tester】FNIRSI FNB48P USB tester has a 1.77-inch full-color ultra-wide viewing angle TFT LCD display, integrated USB-A, Micro-USB, Type-C interface. Gravity sensor, automatically switch the display direction
- 【Parameter Detection and Recording】The highest six-digit display of voltage, current and power, the highest resolution is 0.00001 (V/A/W). 10 sets of switchable capacity, power and time statistics. 1 set of voltage and current curve records
- 【Other detection functions】The internal resistance measurement of the wire by the differential pressure method. E-Marker Cable chip reading. DASH Cable data reading. Record of startup time. Onboard temperature measurement. PD monitor. Analog DASH cable
- 【Multifunction USB Digital Tester】FNB48P uses external 16-bit ADC, PD protocol physical chip. It can monitor the voltage, current, power, resistance, capacity, temperature, D+/D- voltage etc, it can be used to test the fast charging protocol of chargers
- 【Fast Charge Protocol Trigger Detection】FNB48P supports trigger detection of various fast charging protocols, QC2.0/QC3.0 trigger, FCP/SCP trigger, AFC trigger, PD2.0/3.0 trigger, VOOC/WARP trigger, Super VOOC 1.0/2.0 trigger
9.6Exceptional
View offer on:
Show more
3
Eversame22% OffEversame 2 in 1 Type C USB Tester Color Screen LCD Digital Multimeter, USB C Voltage Current Voltmeter Amp Volt Ammeter Detector USB Cable Charger Indicator DC3.6-30V/0-5.1A
Main highlights- WIDE RANGE OF APPLICATION: Thanks to the PD protocol quick charging mode measurement technology, this new multimeter supports the updated iPhone X mobile phone. (Support iphone 8 / 8P / iPhone Xs quick charging, 29W power, 5V3A / 9V3A / 12V2.5A / 15V2A). It also can be applied to test other type C devices, Compatible With Galaxy S10/S9/Note 10 +, ChromeBookPixel, OnePlus and More.
- UPGRADED MULTIFUNCTIONAL USB C POWER METER: Detects the charging status and process of your USB-enabled or type c-enabled devices. Supports QC3.0, QC2.0 and BC1.2. A Must Gadget checks the charging performance (charging speed and quality) of the output wall/car/solar panel chargers and USB charging cables. It can be also used to find the highest current of the Wireless Charger, and test capacity and electric energy of power bank.
- PROFESSIONAL SAFETY GUARD: Featured with over-voltage protection, over-current protection, under-voltage protection, low energy protection and alarm system. This upgraded USB Type C tester can detect safety and maximally protect the appliances from damaging. It will cut off output automatically and alarm by sound, while it will save data when power off suddenly.
- MULTIPLE COLOR SCREEN DISPLAY MODES: New upgraded version offers 8 LCD main color screen display interfaces, allowing switching the display interface by pressing the key. With the new interface settings, this instrument can monitor voltage, current, capacity, electric quantity, power, load impedance, D+/D- voltage and other data of USB.
- EVERSAME PROMISE: We have always believed that a stable and continuously improve product quality. We trust our products and we offer worry-free 18-month. For any reason you are unsatisfied with our product, just feel free to contact support for exchange or refund. WHAT WE PROVIDE: 1X USB Tester. (Note: If the USB Tester doesn’t display any parameters, please insert the small adapter being sent with the package into the side hole on the USB Tester, to trigger the PD Charging Function. )
9.5Excellent
View offer on:
Show more
4
MakerHawkMakerHawk USB Multimeter USB Voltmeter Ammeter Load Tester USB Voltage Current PD Battery Power Capacity Charger Type C Meter Tester LCD Display Cable Resistance QC2.0/3.0/4.0 N10 1.44 Inch Screen
Main highlights- 【Wide range of applications】: It can measure all kinds of USB chargers/PC/laptop/desktop computer/mobile phone/power bank/charger/discharge load/car charger/cable. Support Type-C interface full digital compatible PD protocol/Qualcomm QC3.0/4.0 protocol One table is compatible with multiple protocols, fast charge supports PD QC2.0 QC3.0/4.0 MTK and other protocols
- [Powerful after-sales service team]: As long as you have any questions about the product, we will solve your problem as soon as we receive your email. Your satisfactory purchase experience is our greatest hope! How to email us? Please click "MakerHawk-US" and click "Ask a Question" to email us! Looking forward to your consultation!
- [Note] : When PD power is not connected to the fast charge device, the power is not supplied by default. After the TYPE-C PD is inserted, the test screen is not on. 1. Flip the TYPE-C connector 2. Our built-in TYPE-C interface is used for connection and TypeC interface charger is used. According to the protocol, no load is connected and no power is supplied by default
- [New upgrade]: The product supports two-way insertion detection, increases the current direction to indicate the direction, with a 1.44-inch large LCD screen, 4 operation buttons and 5 connection ports. The plug with gold-plated USB contacts has a strong coating to prevent scratches, stains and damage
- [New reminder function]: Temperature alarm: over 45°C, the temperature display will flash; Voltage alarm: less than 3.8V or greater than 30V, the voltage display will flash; Current alarm: greater than 3A, the current display will flash
- [Flexible color display interface]: Supports 360-degree rotation of the screen to meet reading at any angle. You can rotate the screen by pressing the button corresponding to the horizontal menu bar. When plugged into various digital devices at any angle, positive readings can also be made, making the measurement more convenient
9.3Excellent
View offer on:
Show more
5
KJ-KayJIUSB C Tester,KJ-KayJI 2 in 1 Tester Color Screen IPS Digital Multimeter(2024),Voltage,Cur,Pwr,Resistance,Elec,Temp,Capacity,Tme,Fast Charging,with USB Clip Cable Support PD2.0/PD3.0,QC2.0/QC3.0,BC1.2
Main highlights- 【WIDE RANGE OF APPLICATION】must use the OTG adapter (Micro-usb adapter) that comes with the USB tester, which supports PD3.0/PD2.0, QC3.0/QC2.0, BC1.2 and USB A or USB C ports , support newer iPhone/iPad Pro and Android phone. Compatible with new MacBook Pro, MacBook, iMac, iMac Pro, Dell XPS, Acer Aspire, HP Spectre, ASUE Zenbook, Lenovo Thinkpad, Eluktronics, Razer Blade Stealth, Chromebook, Microsoft Surface Pro and more USB C/USB A devices and charging device.
- 【Test whether fast charging is supported】Charger, insert the tester and Load into the charger to adjust the current to 3A, and "FCP" and "FAST" appear on the display interface, indicating that the charger supports fast charging. Cable, after connecting the charger, insert the cable into the tester and connect to Load, adjust the current to 3A, the display interface shows "FCP" and "FAST", indicating that the Cable supports fast charging.
- 【Test charger voltage and current】Support USB A Charger, USB C Charger. Connect Load, adjust the current to the charger support current, if the tester shows that the voltage and current match the charger support current, the quality of the charger is excellent, otherwise the quality of the charger is not good.
- 【Test cable voltage and current】Support testing Micro-usb cable, usb a to usb c Cable, usb c to usb c Cable. Use a charger with excellent quality after testing, insert the cable, connect the load to test the voltage and current of the cable, if the tester The displayed voltage and current are in line with the current supported by the charger, the cable quality is excellent, and the charging speed is fast; otherwise, the cable quality is not good, and the charging speed is slow.
- 【Test Power Bank/Phone mAh】Test Power Bank, 2 clicks to clear the Tester mAh data, fully charge the power bank, discharge quickly with Load, "Cap" will show how much mAh Capacity the Power bank has. Multiply by 90%. Test the phone, the phone is fully charged, 3 clicks to clear the Tester WH data, the battery is exhausted, WH/3.75=mAh Capacity x 1000 x 90%=close to cell phone battery capacity (Power bank battery same)
- 【Multiple detection functions of USB C Tester】USB C Tester can monitor the voltage,current,power,resistance,power,capacity,temperature of Micro-usb Cable/USB C Cable/usb a to usb c Cable/USB C/USB A device,charging time,Test Group and fast charging.Check the performance of USB C/USB A charger and USB C Cable/usb a to usb c Cable (charging speed and quality). It can also be used to find the maximum current of wireless chargers and test the capacity and power of power banks.
- 【Important Tips and 18 Month Warranty Service]】:When your device does not have a USB port, you can use an alligator clip to clamp the positive and negative poles and convert to USB before testing. When your USB-C device cannot be tested, please insert a small adapter, the small adapter will start the tester. If you receive a defective USB tester or if you have any questions, please contact us first to obtain a valid warranty replacement service for replacement or other assistance.
- 【IPS Color Display Screen】Provides 9 IPS color screen display interfaces, and the display interface is switched by buttons. USB Tester can detect data such as voltage, current, power, resistance, electricity, temperature, capacity, timing, fast charge, D/D-, V/V-, etc. It can also detect whether the charger, cable supports fast charging. (IPS HD color screen is clearer. Only the Screen rotation interface supports 180-degree flipping of the screen)
9.2Excellent
View offer on:
Show more
6
DROK11% OffDROK USB Power Meter, DC 4-24V 5A LCD USB A&C Voltage Current Display USB Tester Multimeter, Test Speed of Charger Cables, Capacity of Power Bank, QC 2.0 3.0
Main highlights- Parameter --- Input voltage: 4-24.000V; Input current: 0-5.0000A; Capacity measurement range: 0-99999mAh; Energy measurement range: 0-99999mWh; Load impedance measurement range: 0.8Ω-9999.9Ω; Temperature measurement range: -10°C~100°C/0°F~200°F (Default temperature unit: Celsius, can be switch to Fahrenheit).
- NOTE --- 1. The meter is covered with protection film to protect the meter from scratching during shipping. Scratches on the protective film are normal, just tear it off. 2. Please connect the USB meter correctly. From USB male port to USB female port, or from Type-C IN port to Type-C OUT port. Don’t connect from USB male port to Type-C OUT port. 3. This version doesn’t support blue~tooth connection.
- Load Test --- This detector can be used with our DROK load testers to test the output voltage, current, power and other parameters of the phone chargers, power banks, USB cables, etc.
- Fast Charging --- Support QC2.0, QC3.0, APPLE 2.4A/2.1A/1A/0.5A, Android DCP, SAMSUNG. NOTE: This fast charge protocol identification mode is for reference only as the mobile phone update is faster and cannot be accurately identified.
- 1.44” LCD Display --- The multimeter has a 1.44 inch LCD high-definition color LCD display, on which real-time display of the charging status of electrical appliances, voltage, current, capacity, energy, power, equivalent impedance, temperature and other indicators are clear at a glance. NOTE: The screen can be rotated.
9.1Excellent
View offer on:
Show more
7
MakerHawkUSB Tester Type C Meter - USB Digital Multimeter Amperage Power Capacity Reader & USB C Current Voltmeter & Voltage Monitor Tester & Amp Amperage Charging USB Detector Checker DC 0-30V/0-6.5A
Main highlights- USB Color Display Tester can monitor Voltage, Current, Capacity, Electric Quanity, Power,Temperature,Load Impedance, D+/D- Voltage, Charging Time and other data of USB, and supports PD2.0, PD3.0, QC2.0, QC3.0, Apple 2.4A and other protocol quick charging voltage ranges, support OTG fucntion.8192 Pixel TFT Color Display ,Two in one measurement of USB and Type C.Timed charging sound reminder and full charge sound reminder.When the power is > 0.5W, the time will be calculated!
- 9.This USB multimeter can easily test various chargers, cables, power banks, laptops, and smartphones with high precision comparable to large professional instruments. 10.Note: When using the Type-C port for testing, if the output is not connected to the device and there is no PD protocol for the charger, the screen cannot be lit.
- 7.The built-in PD protocol can open the Type-C interface with the PD protocol's intelligent charger unloaded power output display, so as to facilitate aging and testing. 8.The PD protocol quick charging mode measurement that supports the updated apple X mobile phone.
- 4.The interface settings such as overvoltage, low voltage, overcurrent, backlight time, etc., and switch to the corresponding interface at the short button at the front desk, set up by adding double or three strokes. 5.The built-in PD protocol can open the Type-C interface with the PD protocol's intelligent charger unloaded power output display, so as to facilitate aging and testing. 6.The PD protocol quick charging mode measurement.
- 1.USB-C male head replacement cost of copper pin contact plug better, tighter current data more reliable. 2.The screen 180 degrees flip display settings function, to adapt to some chargers using inverted display as a positive display. 3.the OTG protocol of Type-C can open the OTG digital function by inserting a random embedded Android switch head in the upper left corner of Android line.
9.0Excellent
View offer on:
Show more
8
ANKGANKG 150A Watt Meter Power Analyzer, High Precision RC with Digital LCD Screen for Voltage (V) Current (A) Power (W) Charge(Ah) and Energy (Wh) Measurement
Main highlights- Provides 8 Electrical Readings: Current (A), Voltage (V), Watts (W), Amp-hours (Ah), Watt-hours (Wh), Peak Amps (Ap), Minimum Volts (Vm), Peak Watts (Wp).
- Multi-function Tool：The watt meter power analyzer help to verifies sufficient operating voltage under load. Prevents peak currents damaging battery, ESC, motors, wiring and connectors. Confirms proper battery charger operation (connect between your battery and charger). Individual cell balancing. Set cutoff voltages, check battery capacity health. Detect receivers and actual operating current so as to make sure whether an UBEC is needed etc.
- Intimate after-sales service:If you encounter any problems during the purchase and use process, you can contact us at any time and we will help you solve the problem as soon as possible.
- High Precision: Measures 0-150 Amps, Resolution 0.01 Amps. Measures 0-60 volts, Resolution 0.01 volts. 0 - 6554W, resolution 0.1W. 0 - 65Ah, resolution 0.001Ah. 0 - 6554Wh, resolution 0.1Wh.
- Digital LCD Screen Display: easy to read the LCD provides clear digital reading.And real-time reading: the wattmeter will continuously provide real-time reading of amperes, volts, and watts after connection.
8.9Very Good
View offer on:
Show more
9
DROKDROK Charge-Discharge Monitor, 0-90V 100A DC Ammeter Voltmeter, Battery Capacity Amp-Hour Watt-Hour Power Time Multimeter, LCD Display Digital Voltage Current AH WH Watt Meter Tester with Hall Se
Main highlights- PROTECTION --- over-voltage protection, over-current protection, over-power protection, over-charged protection, time limitation, etc.
- OTHER FEATURES --- LCD color display; AH power off memorized function; time & AH resettable; calibration function; automatically/manually switch off LCD screen; with output control button to enable/disable output (requires a relay).
- BIDIRECTIONAL AMMETER --- the multimeter can detect current in dual direction without changing the wiring direction when used for monitoring charging and discharging.
- APPLICATION --- can be used as battery charge-discharge tester meter for automobile and car battery; as battery capacity monitor for photovoltaic system; as voltage meter, current meter, power meter, etc.
- 7-IN-1 MULTIMETER --- measure and display voltage (0-90V), current (0-100A), power, battery capacity, amp-hour, watt-hour and time simultaneously.
8.6Very Good
View offer on:
Show more
10
UNI-TUNI-T LCD USB Type C Digital Tester - Power Voltage Amps Meter Current Capacity Cable Tester Tool, UT658Dual DC 4-24V Voltmeter Ammeter Detector Inspecting Portable Power Sources
Main highlights- 【WIDELY APLICATED】The 2nd generation UT658Dual USB testers can inspect USB chargers, portable power sources, data cables and other electronics charging devices with Type-C, USB/Type-A interfaces. Support fast charge protocol 2.0/3.0/4.0
- 【PROTECT YOUR DEVICE】 Our digital voltmeter ammeter can monitor the charging efficiency well, check the current and voltage of the device conveniently, and protect the charging device.
- 【MULTI-FOUNCTIONAL USB C POWER METER】Professional UT658Dual LCD USB tester detector is designed accurate, reliable, stable and easy to carry. Can measure output voltage, current, energy, capacity, circuit equivalent resistance, D+ and D- voltage of USB data cable, and more.
- 【HIGH VISIBILITY】The LCD function of the voltage/amps power meter can display all the measured numbers at any time, and the same screen can display voltage, current, power, capacity, etc. It has 10 groups of data storage capacity.
- 【GREAT ENGINEERING TESTING TOOLS】This LCD USB tester detector is a great tool for applications such as production verification, engineering testing, and DIYers.
- ★★ NOTE ★★★ - Type-C and Type-A are two modules. The correct way to use them is that Type-A port input corresponds to Type-A port output, and Type-C port input corresponds to Type-C port output. UT658Dual does not support Type-C input, docking Type-A output, otherwise the A port will not respond.
8.3Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for charging power current meter
