10 Best Charging Board 18650 Tp4057 In The Us - Black Friday 2024
Best Choice1
diymorediymore 20PCS TP4056 Charging Module Type-C 5V 1A 18650 Lithium Battery Battery Charger Module Charging Board with Dual Protection Functions
Main highlights- Maximum charging current output: 1000ma
- Light state: no load the light not bright, red light for recharging, is full of green light.
- Input interface: Type-C USB.
- Battery: over-current protection current 3A
- Battery overcharge lifting voltage: 4.00V
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
MakerFocusMakerFocus 15pcs TP4056 Charging Discharging Module Type C Interface with Battery Protection 18650 BMS 5V 1A 18650 Lithium Battery Charging Board
Main highlights- Usage: The +/- pads are the power inputs, access to 5V. B+ connects to the positive pole, B- connects to the negative pole, OUT+ and OUT- connects to the loads, such as connecting to the positive and negative pole of the mobile booster board or other loads
- Upgrade Version: The input has a Type C female connector, which can be directly input as a mobile phone charger to recharge the lithium battery; The input voltage wiring pad is also reserved, which can be very convenient for DIY
- Reminder: Please check all the connections before charging, it will be damaged if the load OUT on the positive and negative with wrong polarity. If you do this the first time, please watch the video on Youtube before installation
- Note: When first accessing the battery, there may be no voltage output between OUT+/OUT-, at this time access to 5V charging can activate the protection circuit, the battery is disconnected from B+/B- and then connected again also need to be charged to activate the protection circuit. When using a mobile phone charger as input, the charger should be able to output 1A or above, otherwise it may not charge properly.
- Attention: The charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will damage directly
- Application: TP4056 module can charge for single-cell lithium battery or multi-section parallelled lithium batteries, can be powered by USB ports; The module with USB port, can be directly input to do with rechargeable lithium battery as a phone charger
9.7Exceptional
View offer on:
Show more
3
FASTELECTRIC5pcs 5V 1.2A Charging Discharge Module USB Type-C 18650 Lithium Battery Discharge Charger Board with Protection (Replace TP4056 or TP4057).
Main highlights- With overshoot and overdischarge protection, overdischarge protection 2.9 V, charge cut-off voltage 4.2 V
- When there is no external input voltage, it automatically switches to output mode, supports small current output of 5V, and supports output of about 450 ma. If the output is 1A, the voltage will be around 4.9V-4.5V depending on the power
- Suitable for all types of 3.7 V lithium batteries, including 18650 and aggregate batteries
- Automatically switch input and output, charge the battery when the external voltage is input, otherwise discharge, the charging green light flashes, the green light is always on when fully charged, the light is not on when discharging without load standby, and the blue light is on when discharging with load. The standby power consumption is approximately 0.8 ma
- 4.5-5.5V power supply, suitable for single lithium battery (parallel connection is not limited), maximum 1.2A, can stabilize 1A current as required
9.6Exceptional
View offer on:
Show more
4
HiLetgoHiLetgo 5pcs TP4057 1A 3.7V Lithium Battery Charging Board with Protection Type-C USB C Li-ion Battery Charging Board Over TP4056
Main highlights- Type-C USB C Li-ion Battery Charging Board
- TP4057 1A Lithium Battery Charging Board with Protection
- Dual output of charging status, no battery and fault status display
- Constant current/constant voltage charging with over-temperature protection
9.5Excellent
View offer on:
Show more
5
AITRIPAITRIP 20PCS TP4057 1A Lithium Battery Charging Protection Board Module with Protection Micro USB Charging Boards 3.7V 4.2V （TP4056 Upgraded）
Main highlights- With protection board, overvoltage protection, over discharge protection, over-current protection, over discharge protection value: 2.4V; Overcurrent protection value: 4A.
- TP4057 1A Lithium Battery Charging Board with Protection；Micro USB USB C Li-ion Battery Charging Board
- Scope of application： DIY lithium battery charging; Small electrical appliance magic;Installing a charging port on a tablet computer；Suitable for various types of 3.7V lithium batteries, including 18650 and composite batteries.
- Function Introduction: When the charging current drops to 100mA after reaching the final float voltage, the charging cycle will be automatically terminated When the battery voltage drops below 405V (roughly corresponding to 80% to 90% of the battery capacity), the charging cycle resumes. When the battery voltage is below 2.9V, the battery will be pre charged with a current of 100mA.
- 20pcs 5V 1A 18650 Lithium Battery Charging Board
9.4Excellent
View offer on:
Show more
6
ACEIRMC12% OffACEIRMC TP4057 1A 3.7V Lithium Battery Charging Board with Protection Type-C USB C Li-ion Battery Charging Board Over TP4056 (6pcs)
Main highlights- Type-C USB C Li-ion Battery Charging Board
- TP4057 1A Lithium Battery Charging Board with Protection
- TP4057 1A 3.7V Lithium Battery Charging Board with Protection Type-C USB C Li-ion Battery Charging Board Over TP4056
- Dual output of charging status, no battery and fault status display
- Constant current/constant voltage charging with over-temperature protection
9.3Excellent
View offer on:
Show more
7
HiLetgoHiLetgo 5pcs TP4057 1A 3.7V Lithium Battery Charging and Discharging Board with Protection Type-C USB C Li-ion Battery Charging Board Over TP4056
Main highlights- Type-C USB C Li-ion Battery Charging Board
- TP4057 Charging & Discharging in One Board
- TP4057 1A 3.7V Lithium Battery Charging & Discharging Board
- Dual output of charging status, no battery and fault status display
- Constant current/constant voltage charging with over-temperature protection
9.1Excellent
View offer on:
Show more
8
HiLetgoHiLetgo 10pcs 5V 1A 18650 Lithium Battery Charging Board TP4056 Lithium Battery Charging Board Micro USB Charge Module With Protect
Main highlights- Maximum charge current: 1000mA
- Input Voltage: 5V
- HiLetgo 10pcs 5V 1A 18650 Lithium Battery Charging Board
- Charging cut-off voltage: 4.2V ± 1%
9.0Excellent
View offer on:
Show more
9
Generic5V 1A Charge and Discharge Module, 5pcs, Type-C USB for 18650 Lithium Battery Charger Board with Protection Replaces TP4056 (5V Charge and Discharge)
Main highlights- With overshoot and overdischarge protection, overdischarge protection 2.9 V, charge cut-off voltage 4.2 V
- When there is no external input voltage, it automatically switches to output mode, supports small current output of 5V, and supports output of about 450 ma. If the output is 1A, the voltage will be around 4.9V-4.5V depending on the power
- Suitable for all types of 3.7 V lithium batteries, including 18650 and aggregate batteries
- Automatically switch input and output, charge the battery when the external voltage is input, otherwise discharge, the charging green light flashes, the green light is always on when fully charged, the light is not on when discharging without load standby, and the blue light is on when discharging with load. The standby power consumption is approximately 0.8 ma
- 4.5-5.5V power supply, suitable for single lithium battery (parallel connection is not limited), maximum 1.2A, can stabilize 1A current as required
- """"No Standalone lithium batteries are sold with the product""""
8.9Very Good
View offer on:
Show more
10
ELCCOTYA18650 Lithium Battery Charger Module Charging BMS Board Kits with Dual Protection Function TP4056 Type-C Input Interface USB 5V 1A(Pack of 15)
Main highlights- The Light Indicators of TP4056 Li-ion Charging Board: Red light means charging, Blue light means fully charged.
- The Details of Lithium Battery Charging Board:Input voltage is 5V,Charge cut-off voltage is 4.2V +1%,Maximum charge current: 1000mA,Battery over discharge protection voltage is 2.5V;Battery over current protection current: 3A.
- Pls Note before Using Lithium Battery Charger: Once the battery is connected, the protection circuit can be activated by charging it with 5V voltage.
- Lithium Battery Charger with Easy Usage: There are solder joints for input voltage wiring, which is convenient for DIY;Two-in-one charging and discharging protection function.
- 5V 1A Lithium Battery Charger with Type-C USB Port: We can easily use the Mobile Phone Charger to charge the lithium battery with full charge.
8.6Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for charging board 18650 tp4057
